0
What else can I help you with?
Why are your brakes sticking with the emergency brake on your 97 Taurus?
Cable is rusted, bent, or hanging for some reason. Could also be the parking brake needs adjustment. The brake is not fully releasing.
How do you disconnect the manual cable from a drivers side mirror on a 1997 Saturn sl2?
Check underneath the manual control there shoul be a Allen or hex key head set screw that should remove the cable and lever from the panel.
What is the procedure for adjusting the shift cable on a 97 Ford Taurus for PRNODD1?
The 1997 Ford Taurus shifting cable has adjustment swivel nuts on each end of the cable. You can turn the swivel nuts to lengthen or shorten the shifting cable.
DOes the 1997 Taurus have a speedometer cable?
No, it does not. It's all electronic.
Does a 1999 Ford Taurus have a cable on the speed sensor?
yes
How do you reset the computer on a 2002 ford taurus?
To reset the computer on a 2002 Ford Taurus disconnect the negative battery cable. Leave the battery cable disconnected for five to ten minutes. Reconnect the cable and start the car. The computer should be reset.
What is the cable located right under the Ford Taurus right under the drivers car door?
That is the parking brake cable. It runs to the rear wheels to engage the parking brake whenever the pedal is depressed. Be sure to use the parking brake whenever you park your vehicle to prevent rust in the parking brake cable and to prevent damage to your Automatic Transmission
Who was known as the hanging judge?
William smith and bradley cable
Where is kick down cable on Ford Taurus?
It's attached to the throttle body.
What is the Hanging cable by front tire?
What type of vehicle?? It's probably the anti-lock brake (ABS) sensor cable (black) that is hanging down as there usually aren't "cables" on the front of a car.
How may drivers can be installed in a standard IDE cable?
2 drives per ide cable
How do you disconnect the upper from lower speedometer cable in a 1994 Taurus with mechanical cluster?
You just have to sqeeze the junction of the cable ( white connetion) and it will release
