The 1993 Ford Taurus ignition module is located behind the dashboard. The ignition module, can be found on the drivers side of the dashboard.
They are hydraulic and not adjustable
Remove the Dash.
Should be done automatically by the belt tensioner - if not tensioner could be bad
look at the manual
when the belt has no slack in it
Which belt? Timing or Serpentine? Serpentine is easy. Turn tension pulley with a breaker bar and pull belt off.
if a serpentine belt is loose, it needs replacing. there is an automatic tension pulley on all serpentine belts. so just buy a new belt and install
Should be automatic through the spring loaded belt tensioner
Regardless of what year your Caravan is, it is extremely difficult to replace a serpentine belt w/o a serpentine untensioner tool. This is a thin, long handle with a socket on the end that sticks out at 90 degrees of the handle. The socket slips onto the bolt-head of the tension-er pulley. Once the serpentine belt is threaded around all the other pulleys you put the untensioner tool on the tension-er pulley bolt and pull (or push) to achieve slack in the serpentine belt and slip it on the tension-er pulley.
If it has shocks, replace them. If it has torsion bars one might be broken.
Where can i find a serpentine belt diagram for a 1993 s-10 chevrolet blaze?
The easiest way to access the pulley is to remove the front right wheel and fender liner. The pulley will be right behind the liner.
The 1989 Taurus has larger headlights separate from the turn signal(corner lamp) The 1993 Taurus has more slender headlights joined to the corner lamp.
There is no specific information pertaining to a 1993 Ford Taurus's towing capacity. However, the Ford Taurus in general can tow about 2,000 pounds.
None will work.
take off the serpentine belt by removing the tension from the pully let the tension back off should be 1 bolt holding on the tensioner on remove it and replace with a new one put the belt back on sometimes it is wise to make a digram of the belt routing first