0
How do you install a tachometer on a 1992 Geo Tracker how do you locate the ignition coil if ther is one on this model manual is hard to understand?
Wiki User
∙ 17y ago
Hi, I'm showing the coil mounted in a bracket on the firewall. As you look at the distributor, it is to the left of it mounted in a bracket. As to installing a tachometer, is there one in the instrument cluster? If there is then I'd look for a new cluster at a alvage yard or E-Bay, if not, that's beyond my scope of knowledge. Good luck and Happy Thanksgiving. Steve H.
Wiki User
∙ 17y ago
Add your answer:
Earn +20 pts
How do you install the tach wire for a tachometer for a '99 Elantra?
IF you have the installation instructions for the tach, it prolly tells you where to attach the tach wire. If not, call the manu. of the tach or search for their website online.
How do you install an electronic ignition in a 1965 dodge dart?
Best way is to order the electronic conversion kit from summitracing.com and it has all the directions to it.
How do you hot wire a 1992 Chevy Lumina APV if the ignition is broken?
GO BUY A NEW IGNITION SWITCH AND KEY SET TO INSTALL IN THE COLUMN. It's not that simple smart#@$! If anyone can answer the question intelligently I would appreciate it.
How do you install a push button starter ona 2004 miata?
There is two ways you can do this, one method is fairly secure and keeps your ignition almost stock the other method I would use on a strict race car only as it pretty much bypasses your entire ignition. A) Splice a momentary push button into your ignition switch on your Ignition wire, probably the simplest method and still retains the use of the key for killing the ignition and it still requires the key to start the car. B) Rewire the entire ignition switch to have all your accessories and hot power on a aircraft style switch and install a momentary push button as mentioned above. This will leave you car vulnerable as you will not need a key to start the car.
How do install the ECM in 1992 Geo Tracker?
it is behind the drivers side speaker u have to remove the speaker, und bolts on ecm and lift it out. then you put in the new one a plug it in. no programming is required.
How do you install tach in 87 monty Carlo ss?
In order to install a tachometer on your 1987 Monte Carlo SS, you must first find the tachometer wire by using an automotive diagnostic tool. Mount the tachometer on the dashboard. Connect green, red, black, and white wires to the distributor, ignition power, cigarette lighter, and headlights, respectively. Turn on the engine to test if the tachometer works.
How do you install a tachometer on a 1991 mercury cougar?
Remove the instrument panel cover. Remove the tachometer retaining screws. Remove the tachometer cable from the back of the tachometer. Reverse the process to install the new tachometer.
How do you install aftermarket tachometer 1995 Dodge Ram?
How do I install a aftermarket tachometer on a 1995 dodge ram truck
How do you install a tachometer to a 1983 Ford Laser?
The Tach sensor is connected to the positive terminal of the ignition coil at least that where my laser's factory tachometer is connected to. I believe Ghia and Sport models 1981 - 1984 have factory installed tachs
How to install Autometer tach on snowmobile?
how to install automotive tachometer on a snowmobile
How do you hook up a tach on a 1991 454 Chevy motor?
To install a tachometer first determine where the tachometer will be mounted on the dash column. Then, use a flathead screwdriver to tighten the clamp around the column of the tachometer mount. Next, put the two red "trigger" wires through the firewall and connect the other ends to the coil wires of the distributor. Wrap the tachometer wire around the ignition coil bolts. The remaining two wires must be wired into the ignition of the car. Insert them into the power terminal of the fuse box which permits the tachometer to operate when the engine is on.
How do you install an after market tachometer on a 1999 Mercury Cougar?
you dont need to cause it has a factory tachometer
How do you install a tachometer in a 1996 camaro?
Yes you can.
What is needed to install a tachometer in a dunebuggy with a 1970's vw motor?
a tachometer, wire and wire terminals
How do I install a tachometer in my Chevy truck?
Use an inductive pickup on plug-wire #1, and connected to tachometer located in vehicle.
How do you install tachometer on DIS system on a 1996 Chevy Cavalier 2.2L?
I have the tachometer adapter but I'm unsure as to where I splice the wires.
How do you install a Tachometer in a Volvo 240 DL?
http://www.davebarton.com/240tachinstall/
