If you're not familiar with brake jobs in general, purchase a Chilton's repair manual that covers your vehicle. Good brakes are a number one priority.
removeing bake pads and roader from a 99 ponitcia gtp do yu have any pic to show how
If they are warped, they need to be turned, if they are groved, they need to be turned. If they are glazed, they need to be turned. In general, if you are working on the brakes, they need to be turned.If they are too thin (not wide enough across) to be turned, they need to be replaced. Many newer rotors are not thick enough to be turned, so you just replace them every time you replace the brakes. Most auto parts retailers will measure the thickness of the rotors for you and tell you if they can be turned.
Just pads? approx. $30-50 If it needs rotors? Probably $50 ea. If it needs calipers? Probably $50 ea.
Depends what has to be replaced Pads estimate $30.-40 Rotors Estimate $50 ea. Calipers Estimate $75 ea. Plus labor
Brake rotors wear just as brake pads do and when they wear down beyond minimum specs they become unsafe. Good brakes are a # 1 priority.
You do not need a scan tool to replace any brake pads. The wear is obvious.
depends on the condition od the pads. If worn or have groves etc from the rotors then replace.
no but it is recomended.
Replace the pads, and the rotors. You need to change the brake pads and the rotors.
If the rotors are in good condition, not warped, not scratched, then you can replace the pads without turning the rotors. Inspect the rotors carefully.
You replace rotors when they get too thin, or are warped. They may be to thin to be turned and still alright to use. Rotors do not "have to" be turned to put new pads on.
To replace rotors and pads including labor cost you are looking at 600 bucks. axl
how much does it cost to replace brakes rotors on honda crv
Could be the pads are worn down replace your rotors and pads could also be runout on the rotors
The new pads will last longer, work better, and be quieter if the rotors are resurfaced.
1500 or 2500???
Did you use ceramic brake pads? If so, that could be the problem. Unless it's super bad, you don't really have anything to worry about. Next time, use semi metallic brake pads. Also if the rotors were not turned this will surely cause disk brake squeal.