0
How does one replace the windshield wiper motor in a Hyundai 2000 Accent?
Wiki User
∙ 15y ago
the wiper motor is mounted on the outside of the firewall, on the top-passenger side. you will need to pinch off each side of the electrical connector to release the latch and pull on the connector to remove it. The motor is attached with four 10mm bolts. Remove the bolts to free the motor from the firewall. the motor mechanism is attached to the wiper pivot rod and needs to be detached with a pair of needle nose pliers. you will need to pivot the wiper slightly to get better access to the fastening nipple. gently slide the pliers between the motor arm and the pivot rod while applying a slight prying force. It will pop out of place. To reinstall, use a channel lock type of plier and apply only as much force as necessary to the nipple/pivot rod to replace the knuckle in the boot.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Where is the windshield washer motor?
The windshield washer motor is located on the passenger side firewall
How do you get to the starter motor to check or change it on a 1995 Hyundai scoupe?
how to change starter on Hyundai scoupe 1993 12 valve
How to replace a 1999 f-150 windshield motor?
Windshield Wiper Motor Removal & Installation Front 1. Turn the ignition switch to the ON position. Turn the ignition switch ON until the wiper blades are straight up, then turn the ignition switch OFF. 2. Disconnect the negative battery cable. 3. Remove the right-hand and left-hand windshield wiper arm and blade assemblies. 4. Remove the cowl top vent panels. 5. Detach the electrical hardness connector at the windshield wiper motor assembly. 6. Remove 3 wiper motor (module assembly) retaining bolts and remove the module assembly from the vehicle. 7. Remove the wiper linkage retaining bolt and remove the linkage from the wiper motor. 8. Remove 3 retaining nuts and remove the windshield wiper motor. To install; 9. Place the windshield wiper motor in position and install 3 retaining nuts. Tighten to 10-12 ft. lbs. (12-17 Nm). 10. Connect the wiper linkage to the windshield wiper motor and install the retaining bolt. Tighten the bolts to 14 ft. lbs. (20 Nm). 11. Place the wiper motor (module assembly) in position and install 3 retaining bolts. Tighten the bolts to 6 ft. lbs. (9Nm). 12. Install the electrical hardness connector to the windshield wiper motor. 13. Connect the negative battery cable. 14. Allow the windshield wiper motor to cycle several times while checking for proper wiper motor operation. 15. Turn the windshield wiper motor to the OFFposition to park the wiper motor in the park position. 16. Install the cowl top vent panels. 17. Install the wiper arm and blade assemblies. Install the retaining nuts and tighten to 22-29 ft. lbs. (30-40 Nm). 18. Connect the negative battery cable. 19. Check the windshield wiper motor for proper operation and the wiper arms for adjustment.
Fix motor rear motor mount dodge neon?
There is no fixing a broken motor mount. Replace them with a new ones.
How do you repair wiper arms for 1991 Toyota Camry that are always in upright position?
If windshield wipers are stuck in position and won't move, I would say that the windshield wiper motor needs replacing. This happened to me last year.
Why won't Hyundai accent windshield wipers work?
possible siezed linkages or motor. common for linkages to get siezed,
How much should it cost to replace motor mounts on Hyundai Accent 1998?
About $12 a piece (accents have four engine mounts) plus labor.
What kind of motor oil does a 2007 Hyundai accent use?
20w50
Install a windshield wiper motor on 1999 Hyundai sonata?
The windshield wiper motor is under the front cowl. After removing the cowl the motor should be easily accessed for replacement.
What kind of motor oil does a 2004 Hyundai accent use?
sae 5w30
How do you replace the windshield motor on a 2002 Kia Optima?
To replace the windshield motor on a 2002 Kia Optima, use a fused jumper wire to bypass the relay of the wiper motor. Then use the positive lead to touch the positive terminal on the relay. Remove all mounting bolts of the windshield motor and gently pull the motor out. Replace with new.?æ
How do you replace a Kia Sportage front windshield wiper motor?
No
What is location of the sensor 1 bank 1 on Hyundai accent 2002?
it is the closest one to the motor
How do you replace a windshield wiper motor on a 1998 Mitsubishi mirage?
How to replace wiper motor on a 1998 montero sport mitsubishi
Will a 1999 Hyundai accent motor fit in a 2000 Hyundai accent?
yes it will, there are slight modifications with the sides that will need to take place, but it is nothing somone with a moderate back ground in car maitnence cant handle
Where is the air mix door on a 1999 Hyundai Accent?
Behind the glove box, above the blower motor.
How do you replace a wiper motor on a 1996 Hyundai elantra gls?
* Remove the wiper arms * Remove the windshield wiper cowl cover * Disconnect the electrical connector from the wiper motor and remove the motor * Remove the wiper motor retaining bolts * Pry the linkage arm off the wiper motor pin with a large screwdriver
