answersLogoWhite

0

No... they are much, much different things.

User Avatar

Wiki User

11y ago

What else can I help you with?

Related Questions

Is a camshaft position sensor the same as a camshaft actuator?

no


Is a cam sensor the same as the camshaft sensor?

Yes


Where is camshaft position sensor on 97 Saturn?

There isn't a camshaft position sensor. If you are asking because of an error code you received, it is caused by a signal that mimics the same signal as a camshaft position sensor.


Is the crankshaft sensor the same thing as a camshaft sensor?

No. The crank sensor reads the crankshaft location and speed. The cam sensor reads the camshaft.


How long does it take water to heat up to 100 degrees?

Two years 11/2 months and 3 days and 41/2 hours approximately.It has to do with how many thousands of gallons are in the tank , how many are being drawn out and what the BTU input is of the fuel being used100 litres at 60 degrees Celsius = 1 hour (2kw element)150 litres at 60 degrees Celsius = 1.5 hours (3kw element)200 litres at 60 degrees Celsius = 2 hours (4kw element)250 litres at 60 degrees Celsius = 2.5 hours (4kw element)provided all are using 220 volts of domestic electricity


Are the camshaft bearings in a Chevy 350 engine all the same?

yes


Is the camshaft in a 1994 Chevrolet 350 the same as the camshaft in a 1997 Chevrolet 350?

No it is not. The 94 cam is not a roller cam. The 97 is a roller cam. Big difference.


Does a camshaft pulley interchange with a 1990 Honda accord to a 1992 Honda accord?

Yes it does interchange. 1990-1993 Accords have the same camshaft pulley (or cog).


What does a camshaft sensor do on a Chevy S-10 2.2liter?

it basically tells the computer that the camshaft is turning same as crankshaft sensor. if the sensor does not work the vehicle will not start.


What is a camshaft synchronizer?

A camshaft synchronizer is a device driven off the camshaft that couples to a sensor that tells the car's powertrain computer at what point of rotation the camshaft is. The information from the sensor is used by the powertrain computer to time the spark that will ignite the air-fuel mixture in the cylinders. Many engines using camshaft synchronizers are older designs that were originally designed to have a conventional distributor; the camshaft synchronizer mounts in the same place as the distributor used to.


Which words mean about the same as deception?

Lies, cheat, fraud, scam.


Where is the camshaft positioning sensor located on a Mazda b2500?

still waiting on a answer , is it the same as a 2.3?