YesBecause it is strong enough to keep the sheave wheel in place
support the headgear
Furnished with beams, as the head of a stag.
9006 for low beams and 9005 for high beams
First be sure the bulbs are good then check the switch.
your bulbs are burnt out. when you switch on the high beams its only the high beams. but when you flash your brights it lights up both high and low beams.
Head - good luck
The rule of the road is to flash your high beams to remind them to turn their high beams off.
use your low beams-head lights.
the answer is approx, 350 feet. if they are standard head lights.
loose connection
You can't adjust high beams and low beams separately. All you can do is loosen the head light and adjust the tilt, then tighten it.