Posts where cables go. They are also called the electrode or terminal. The positive terminal is referred to as the Cathode and the negative terminal is called the Anode.
The anodes and cathodes affect the voltage of the battery all the time. Without them, the battery would not work. The anode provides the positive charge or current. The cathode provides the negative charge or electrons. Part of the anode is down in the battery and part serves as a terminal. Part of the cathode is down in the battery and part serves a a terminal.
A battery terminal or a battery CABLE terminal. If the terminal is gone or destroyed on the battery, you need a new battery. If the cable terminal is terminal, you can buy an after market replacement or a complete new cable with terminal at most any auto parts store.
the led lug with the positive sign next to it +
The negative terminal of a battery has a - sign and positive terminal has a + sign.
There are a number of references on the Internet to corrosion of the positive battery terminal on the 2004 Suzuki XL7. I discovered the problem when the terminal broke apart as I attempted to remove the battery terminal to clean it. The repair is actually quite simple.Attached to the positive battery terminal is a gray plastic part, approximately 1.75" x 1.5". This part contains a 100 amp fuse. Suzuki identifies it as the "battery fuse" (part number 36739-52J00). Remove the two cables from the battery fuse by removing the two hex nuts (10mm and 12mm). The battery terminal is attached by the bolt with the 12mm nut. I found a universal replacement battery terminal at my local auto parts store. Simply reassemble the battery fuse to the two cables and the new battery terminal.If the corrosion is so bad that you are forced to destroy it like I did, you might find a replacement battery fuse at your local Suzuki dealer. I purchased mine from http://www.suzukicarparts.com who I have found to be a very reliable source of Suzuki parts.
You would never connect any part of an AC circuit to a battery.
You connect the batteries in series Red charger lead to one red battery terminal, then the black battery terminal of that battery to the red battery terminal of the second battery. Then black battery terminal of the second battery to the black lead of the charger.
A capacitor can be charged using a battery by connecting the positive terminal of the battery to one terminal of the capacitor and the negative terminal of the battery to the other terminal of the capacitor. This creates a flow of electrons from the battery to the capacitor, storing electrical energy in the capacitor.
You can attach a motor to a battery by connecting the positive terminal of the battery to the positive terminal of the motor using a wire, and connecting the negative terminal of the battery to the negative terminal of the motor. This will allow the motor to receive power from the battery and start spinning when turned on.
The top of a battery is called a carbon rod, which is on the positive terminal.
To charge a capacitor using a battery charger, you connect the positive terminal of the battery charger to the positive terminal of the capacitor, and the negative terminal of the battery charger to the negative terminal of the capacitor. The battery charger will then supply a voltage to the capacitor, causing it to store electrical energy.
Center terminal is connected to the positive from the battery. Outside is connected to ground (-).