answersLogoWhite

0

It simply the product of r.m.s current through that conductor and r.m.s voltage across the conductor and the neutral/ground. We can measure the voltage with help of voltmeter and current with help of ammeter.Both these meter measure these quantity in r.m.s mode.

User Avatar

Wiki User

16y ago

What else can I help you with?

Continue Learning about Engineering

Why power is measured in terms of kva not in kw in ac supply?

Unlike DC in AC Power is the Product of Voltage*Current*Power FactorP = V*I*PFIn the above expression power factor is a variable quantity which can be different for different circuit hance does not allow you to specify ratings in KW rather then KVA.


What is the power of AC generators measured in kW or kVA?

Yes, you can use both, but watts is more useful; it provides the total amount of power the generator can output.


Is 10 kva supply to 3 phase load is equal to 10kva supply to single phase load?

Yes of course!! 10 kva electrical power is 10 kva electrical power either it would be three phase or single phase. But other factors i.e. current, voltage changes accordingly. Actually this question is quit confusable. Because in 3phase system, if each phase gives 10kva power (single phase power = 10 kva) then 3 phase power will be 10 X 3 = 30 Kva If we go leteratualy towasrds the question, then the asnwer will be - No. becasue 10 kva supply to 3 phase load will be 3phase supply(i.e440V) & 10kva supply to single phase load will be single supply (i.e 250V).


Why maximum demand rating is not expressed in kw?

maximum demand is measured in kva because current drawn is dependent on power factor for the same load and current drawn is calculated with kva


Why is a UPS rated in KVA?

A UPS (Uninterruptible Power Supply) is rated in kVA because it measures apparent power, which accounts for both the real power (in kW) and reactive power (in kVAR) that the system can handle. This rating is important as it reflects the total power capacity available to support connected equipment, regardless of their power factor. Since different devices have varying power factors, kVA provides a more universal measure of the UPS's ability to supply power efficiently. Using kVA helps ensure compatibility with a wide range of electrical loads.

Related Questions

Why power is measured in terms of kva not in kw in ac supply?

Unlike DC in AC Power is the Product of Voltage*Current*Power FactorP = V*I*PFIn the above expression power factor is a variable quantity which can be different for different circuit hance does not allow you to specify ratings in KW rather then KVA.


Why transformers are rated with KVA?

Transformers, like inductors can only handle a specific amount of voltage and current before overheating, with AC or DC input. AC 'real' power delivery from a transformer is measured in kilowatts (kW) which is identical to KVA when "Power factor = 1". In the extreme, with "Power factor =0", a transformer could be fully loaded in terms of KVA, while supply zero 'real' power (kW).


What is the power of AC generators measured in kW or kVA?

Yes, you can use both, but watts is more useful; it provides the total amount of power the generator can output.


Is 10 kva supply to 3 phase load is equal to 10kva supply to single phase load?

Yes of course!! 10 kva electrical power is 10 kva electrical power either it would be three phase or single phase. But other factors i.e. current, voltage changes accordingly. Actually this question is quit confusable. Because in 3phase system, if each phase gives 10kva power (single phase power = 10 kva) then 3 phase power will be 10 X 3 = 30 Kva If we go leteratualy towasrds the question, then the asnwer will be - No. becasue 10 kva supply to 3 phase load will be 3phase supply(i.e440V) & 10kva supply to single phase load will be single supply (i.e 250V).


Why maximum demand rating is not expressed in kw?

maximum demand is measured in kva because current drawn is dependent on power factor for the same load and current drawn is calculated with kva


Why is a UPS rated in KVA?

A UPS (Uninterruptible Power Supply) is rated in kVA because it measures apparent power, which accounts for both the real power (in kW) and reactive power (in kVAR) that the system can handle. This rating is important as it reflects the total power capacity available to support connected equipment, regardless of their power factor. Since different devices have varying power factors, kVA provides a more universal measure of the UPS's ability to supply power efficiently. Using kVA helps ensure compatibility with a wide range of electrical loads.


Can we improve generator power factor for increasing active power?

The 0.8 Power Factor provided by generator manufacturers is not the load power factor, but it is the nominal power factor used to calculate the kW output of an engine to supply the power for a particular alternator kVA output. Alternators are therefore designed to supply their rated kVA at 0.8 lagging power factor.


What is the formula to calculate load voltage?

Power requirements are measured in KVA, which stands for Kilo-Volt-Amperes. To calculate the amount of power you require you would use the following formula. KVA = Volts * Amps / 1000


Convert 20 kva to kw?

Your question cannot be answered, unless the power factor of the load is specified. Since true power(measured in watts) is the product of apparent power(measured in volt amperes) and the power factor of the load.So, given your figure of an apparent power of 20 kV.A(not 'kva'*), the corresponding value of true power could (theoretically!) range from20 kW at a power factor of 1.0, to0 kW at a power factor of 0.(*The correct symbol for kilovolt ampere is 'kV.A', not 'kva', and the correct symbol for kilowatt is 'kW', not 'kw'.)


Is the power supply of 45 KVA single phase enough to have 16 PC running at simultaneously in your office?

An ordinary PC has a 300-500 watt power supply. 16 of them would draw 8 kW maximum, and allow 25% extra for peripherals, so that's 10 kW, so a 45 kVA supply would be fine.


What is the capacity of transformers 25kva?

The capacity of a 25 kVA transformer refers to its ability to handle a maximum load of 25 kilovolt-amperes. This rating indicates the maximum amount of electrical power the transformer can safely supply without overheating or sustaining damage. In practical terms, a 25 kVA transformer can supply approximately 20 kW of real power in a three-phase system, assuming a power factor of 0.8. This makes it suitable for various applications, including small commercial and industrial uses.


How do you calculate 3 phase kWh from amps measured on each phase?

The voltage and current will give the kVA, but the kW depends on the power factor of whatever load is connected to the supply. For a (let's say) 11 kV supply, the voltage from line to neutral is 11,000/sqrt(3) which is 6351 v. The kVA on each phase is 6.351 times the current, and you just add up the three kVA values to find the total. At higher voltges like 11 kV the three currents in the lines are usually very nearly equal.