To replace the license plate light on a 1999 Volvo S80, first, locate the light assembly at the rear of the vehicle above the license plate. Use a flathead screwdriver to gently pry off the lens cover. Remove the old bulb by twisting it counterclockwise, then insert the new bulb and reattach the lens cover. Finally, test the light to ensure it works properly.
To replace the license plate light on a 1991 Volvo 240, first, locate the light assembly, which is typically found above the license plate. Use a flathead screwdriver to gently pry off the plastic cover or lens. Once exposed, remove the old bulb by twisting it counterclockwise and replace it with a new one, ensuring it’s securely in place. Finally, reattach the cover and check that the light is functioning properly.
You need a torx screwdriver....
how do you replace license pate light on 2006 pontia g6
Unscrew license plate and remove to expose light fixtures. Wedge light module away from holes. Replace them and return them to sockets.
It is very easy to change the license plate light on an Oldsmobile Aurora. All you need to do is remove the license plate and look above where the plate was. There are bolts that are holding the light in. Unscrew the bolts and then replace the light.
How do you change the liscence plate light fuse
To replace the license plate light bulb on a 1990 Volvo 740 GLE, first, open the trunk and locate the light assembly above the license plate. Gently twist the light assembly counterclockwise to remove it from its housing. Once removed, pull out the old bulb and insert a new one, ensuring it's securely in place. Finally, reinstall the light assembly by twisting it back into position and test the new bulb to confirm it works.
Remove the screws from the lens covering the bulb, pull out the bulb and replace it.
Superdiscount LEDs has a tutorial out how to change the license plate light to an LED light. Its pretty general how to do but a lot easier with pictures. Heres to step by step links that should help you! http://www.superdiscountleds-how-to-install-leds.webs.com/ -OR- http://www.go-audi.com/14083-audi-q5-how-do-i-replace-license-plate-bulbs.html Source: www.superdiscountleds.com
there are two spots above the license plate where the lights go on each one there should be a spot where you can push the cover in and then just pull out at an angle
To change the license plate light on a 2002 Geo Tracker, remove the light lens with a small screwdriver. Take out the old bulb and replace with a new one. Tighten the screws on the light lens.
if your under miles its under warrenty