0
What else can I help you with?
Why won't a 230-460 volt motor work on a 120-208 volt circuit?
Because its designed to operate at 230-460, not 120-208.
Normal voltage house in the US?
The vast majority of homes are supplied with 120/240 volt or 110/208 volt.
Does a 220 volt 100 watt cost less to operate than a 110 volt with the same bulbs?
no.
How do you convert 120 volt machine to 110 volt plug?
No conversion needed. These are nominal voltages which range from 110 to 120 volts. It will operate fine on the outlet.
Will a 208 volt 3 phase generator supply operate a 230 volt 3 phase motor?
Yes, but the motor's horsepower rating will not be reached.
Can 110v circuit power 240v devices?
You need a step-up transformer, to go from 110 to 220-240 volts. Then a 110 volt supply can operate 240 volt equipment.
Can a 208 volt hot water heater be used with 110 volt with a 20 amp fuse?
Yes, but by using 120 volts on the 208 volt element you will only be able to obtain 1/4 of the rated wattage from the element not 1/2 like it seems you should.
Does a 208 volt outlet need a neutral?
No a 208 volt outlet does not need a neutral. 208 volts is the line voltage between any two legs of a three phase 208 volt system.
Can you run a 208 volt oven on 220?
Yes. This is the same standard. The terms 208 and 220 mean the same thing, much like household voltage is sometimes called 110 or 120.
Can a 127 volt device operate on 110 volt power?
Yes, a device rated for 127 volts should operate on 110 volt power without issues. The device may run slightly slower or with slightly reduced performance due to the lower voltage, but it should work safely.
How will a 3 phase panel give you 110 volts and 220 volts?
A three phase panel will not give you 110 and 220 volts. A three phase four wire panel will, but not at these voltages. The nearest voltages will be 120 and 208 volts. The 120 volt is the wye voltage of 208 volts. 208/1.73 = 120 volts. A single phase three wire panel will give you 110 and 220 volts.
Do you need a step down transformer to run a 208 volt steam table on 240 volt feed?
Yes a transformer should be used. The steam table needs its correct voltage otherwise on 240 volts it will operate over its given specified nameplate wattage. A 208 volt heating element run off of 240 volt will have an output increase by 75 percent.
