answersLogoWhite

0


Best Answer

check relays under the hood Answer It could be the switch on the dashboard.

Possibly a bad headlight switch or connector. I just had a `93 Sable that the headlights would turn off when the right indicator was selected, and come back on as soon as it turned off. The signal/wiper switch was in rough shape (washers didn't work and wipers only worked on high) so I changed it out. headlights still shut off on right turn signal. Pulled the dash and found the headlight switch over heating, and connector melted. Replaced connector and switch. SOLVED...

User Avatar

Wiki User

8y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: If the fuses and bulbs are okay what is wrong if the tail lights and dash light do not work on a 1995 Ford Mercury Sable?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Why would the headlamps not work in 1993 Mercury Sable when the bulbs and fuses are working?

check all your ground wires


What to do if my 1999 Mercury Cougar has no brake lights and the bulbs and fuses are fine?

check the switch at the break peddle


How do you repair non working blinkers on 1998 mercury Sable?

You have to diagnose the system to determine the cause. Check the fuses, the bulbs, the flasher relay then the switch.


What could be the reason for dash board lights and tail lights not working on a 1989 Mercury Sable even after the fuses have been replaced?

Is there a penny stuck in the lighter port?


Where are the fuel pump fuses and relays for a 2001 Mercury Sable?

location for fuse, and relay switch on a Mercury Sable


Why are the lights inside the console not working on a 1998 Plymouth neon?

check your bulbs and fuses check your bulbs and fuses


Why are my reverse lights not working on my 1999 corsa?

have you checked the bulbs and fuses


What do you do if your tail lights do not work while driving though brake lights work fuses and bulbs are good?

on some cars the tail lights and brake lights are totally different bulbs gain access to the bulbs and have someone push the brakes so that you can determine which bulbs are the brake lights and replace the tail lights


What else causes brake lights not to work?

fuses are blown, or bulbs are blown


Your brake lights will not work on a 1994 ford escort you have already replaced bulbs and fuses?

Working brake lights are important for safety reasons while driving. It is important to check all of the wiring, if the brake lights are not working and the fuses and bulbs have been checked.


Hazard and signal lights stop working?

you should try checking the fuses and replacing the bulbs the fuses for thos lights should only be about a 10 or a 15


Your reverse lights do not work on your 2000 windstar all others bulbs good?

check bulbs, fuses & reverse switch