Current I = V/R
V = 9V
R = 100ohm
I = 9V/100ohm = 90mA
Ohm is the unit for electrical resistance. The definition is given by Ohm's Law: resistance = voltage / current; in SI units: ohms = volts / amperes. For example, a resistance of 1 ohm would result in 1 ampere of current for every volt applied.
Volt (V) = Resistance (R) times Current (I) therefor R = V / I 30 Ω = 3V / 0.1A
12/1.5= 8. If I = Current from 1.5 Volt source and I2 = current from 12 V source then I = I2/8 or said in another way the current from 1.5V device is 1/8 of the current from 12 V device.
depending on your load resistance what are you using . suppose you are using 100 ohm load resistance than current will flow 1.5*4=6/100=0.06Amp and if you are looking for battery current capacity than mind it you are using series connection the current will not change remain same as one battery but voltage will change as i mention above 6 volt.
Ohms Law.
The value of internal resistance of 1.5 volt battery is 0.5 ohms.
4.8 ohms
A resistance of 3 ohms connected between the terminals of a 9-volt battery will result in a current of 3 Amperes. If the battery is one of those little ones with snaps on top, it may be able to produce 3 amperes of current for about 3 seconds before it rolls over and totally dies.
The ohm is the unit of electrical resistance to current flow. More ohms (more resistance), the less current will flow. Less ohms (less resistance), the more current will flow. One ohm is defined as the amount of resistance that will cause one ampere of current to flow if the supply voltage is one volt. Ohm's law states that amps = volts / ohms So, if you had a 12 volt battery, and you connected a load, say a heating element that had a resistance of 3 ohms, how much current would flow in the circuit? amps = 12 volts / 3 ohms amps = 4
No current flows through the battery. There is a current through the external circuit. I = E/R = 9/10 = 0.9 amperes.
Current I = V/R V = 9V R = 100ohm I = 9V/100ohm = 90mA
Google Ohms Law. It will give you all the formulas you need to compute Ohms,Volts and Amps. Simple formulas :-)
Current = voltage/resistance If those are the only components in the circuit, then Current = 9/12 = 0.75 Ampere = 750 mA
Just use Ohms Law: V=IR, that is, voltage (in Volt) = current (in Ampere) x resistance (in Ohms).
75 ohms. R = E/I.
Current, I is equal to V (voltage) divided by R (resistance); Hence: I=V/R = 9V/200 ohms: I = 0.045 Amps, or 45ma (milliamps).
V = IR Voltage = Current * Resistance so 9 = 0.25 * R Hence R =36 Ohms