By radio code I assume you mean the preset buttons.
To do this you:
- tune the new frequency you want to use
- press and hold the preset button to which you want to assign this frequency
the radio will go silent for a couple of seconds but when it starts playing again the frequency has been assigned to that button
or
the radio will continue playing and there will be a 'beep' when the assignment takes place.
This is a very common procedure for many makes of car radios
with the radio s/n number you will have to get the reset code through a Honda dealer with the radio s/n number you will have to get the reset code through a Honda dealer
The code to reset the radio is specific to your car. No one will know that code. If you cannot find the code written down somewhere, contact your Buick dealer for instructions on how to get the code. The radio may need to be removed to get the radio serial # and with that the code, or the selling dealer may have it on file.
There is no exact way to reset a Kia Sorrento radio using a code. Codes can be revealed at the car dealership providing you prove ownership of the car. The radio code is tied to the VIN number.
By taking the cable off battery putting back on reset code
contact your local Authorized Mitsubishi Dealer the radio. Once the Part Number and the Serial Number are in hand, your Dealer can access the security code for that radio. Customer Relations Call Center at 1-888-MITSU2010 (1-888-648-7820) they will provide you with security code and steps to reset the radio as long as you have the Part Number and Serial Number for your radio unit. Agents are available Monday-Friday 7 a.m. to 4 p.m. (PT). It's free :)
How do I unlock my 1998 I 30 radio reset
The reset code is on the back of the radio,
i need to know how to set the radio when you battery goes dead and the radio says code its a 2001 mits monyero sports.
The code needed to reset the radio is the model number on top of the radio. The you must call a Honda dealer to get the code. If you are the original owenr or have the owners manual, the code may be in the written in the manual. i need to know how to enter the code on the radio the radio reads ERR 3
I had a problem before with my 1998 firebird where the radio locked and I had to get a code to unlock it now it is locked again and I don't have the manual to get the instructions to unlock it but I do still have the code.
Howdo i reset my radio security code ml 500 2002
The reset code is specific to the radio. Look in and on the glove compartment for the code and in the owners manual. If it is not there you need the serial number of the radio and have to call the dealer for the code.
with the radio s/n number you will have to get the reset code through a Honda dealer with the radio s/n number you will have to get the reset code through a Honda dealer
You insert the code with the radio presets. Just push the reset # that corresponds to the radio preset. If you have locked the radio up just leave it on for a few hours and it will reset so you can enter the code again.
Me too want to know how!!! I changed battery on my 2001 montero and stunned to see need to enter code on radio in order to work. that is sucks!!!
Mine was reset when the radio says "code" by entering 2456 on radio channels
There is nothing to reset except the radio. Insert the 5 digit radio code to reset the radio and then reset the clock and presets for stations.