If your radio is displaying "Loc" and you cannot remember or know the 4 didget code to unlock it, you can take it to a local Chevy dealer and they should be able to unlock it for a small price as this happened to me.
Wiki User
∙ 2008-06-26 19:52:40your dealership will reset for free
it is inside the cover of the fuse box, just type in the code and you are good to go
If your battery has been disconnected recently (and therefore your radio has been reset), you may find the code has reverted to the factory setting: 1111.
You need to call a Mercedes dealer (parts & service dept.) and give them the vin#.
Hold the 'clock' button until it starts to blink, adjust the time and poke the 'clock' button to accept the time.
Mine was reset when the radio says "code" by entering 2456 on radio channels
your dealership will reset for free
Have vehicle scanned to determine the problem and have codes cleared
belt diagram for a 1996 Geo Prizm
If you mean reset the computer: remove the battery negative cable for a few minutes.If youhave security codes on the radio write them down before removing the cable. Replace the cable and the ECM should be reset.
where is located the fuel pump relay on 1996 geo prizm
After repair, you use a scan tool or you unhook battery.
There is no reset on a 1996 Chrysler Sebring.There is no reset on a 1996 Chrysler Sebring.
Go to Mercedes- Benz dealer, they will ask u for vin number, then they will give u the code.
try a local parts store some of them read the codes for free and will reset them for you otherwise you have to take it to a garage.
Go to http://autos.msn.com/ and put in geo/prizm... then look up the year of the prizm...1996... click on features and specs. Scroll down, and you'll find the horsepower of a 1.6 liter 1996 geo prizm. I found it to be 100 horsepower.
Radio unlock codes are specific for each individual radio. You will have to remove the radio and find the serial number. Call the dealer with this information and they can give you the code.