The US state with the highest water to land ratio is Alaska. Alaska has a water to land ratio of 60.40%, which is the highest of any US state. Alaska is followed by Hawaii (37.20%), Florida (30.90%), and Rhode Island (30.50%).
New Mexio
Larger cells will have a greater surface area-to-volume.
Because evaporation happens at the surface.
Surface area of cell is divided volume of cell to get surface to volume ratio . If surface area is 8 cm2 and volume is 2 cm2 . The ratio would be 4:1 .
Surface area to volume ratio is defined as the amount of surface area per unit volume of either a single object or a collection of objects. The calculation of this measurement is important in figuring out the rate at which a chemical reaction will proceed.
==== Not really. True that gravity affects all objects equally, but unless we're in a complete vacuum, we have to take into consideration wind resistance in the form of the ratio... surface area/mass. Which ever has the greatest surface area to mass ratio will fall slower than the one that has a lesser surface area to mass ratio. Take for instance, an ordinary plastic shopping bag. If you ball it up as tight as you can, you reduce the exposed surface area while keeping it's mass unchanged. If you drop it, it will fall to the ground quickly. If you open it up and flap it around and then drop it, it will float to the ground slowly. ====
Perimeter ratio is: is a path that surrounds an area and area ratio is: Area ratio is the cross sectional area of the nozzle exit divided by the cross sectional area of the nozzle throat.
Western Australia is by far the largest state in land area.
The most densely populated area in Washington state is the city of Seattle,
Gating ratio is the ratio of sprue area to total runner area to total gating area. As : Ar :Ag
Plains
Area ratio = (edge-length ratio)2 Volume ratio = (edge-length ratio)3 Volume ratio = (area ratio)3/2
The ratio is pi/4.
The question is not specific enough for a sensible answer. It could refer to the ratio of the area of the shape to its perimeter or depending on its shape, the ratio of the area to the length of one or more of its sides.
to obtain the ratio of surface area to volume, divide the surface area by the volume.
If the ratio of similarity is 310, then the ratio of their area is 96100.
The surface-area-to-volume ratio may be calculated as follows: -- Find the surface area of the shape. -- Find the volume of the shape. -- Divide the surface area by the volume. The quotient is the surface-area-to-volume ratio.
The surface area to volume ratio will increase