0
Chevrolet
A brand of vehicle, Chevrolet or Chevy was produced by General Motors Company (GM). The car was named after Louis Chevrolet and was set up to sell a variety of mainstream vehicles to compete with Model T by Henry Ford.
6,429 Questions
What is the engine oil capacity for a 2007 Chevy uplander v6 3900?
The capacity according to my 09 owners manual is 4.0 quarts or 3.8 liters for engine oil with a new filter.
Stock gear ratio in 1997 Chevy 1500 rear end?
You have a RPO code in your glove box. I have a 1997 Z71 and my rpo is GX4 and the rear ratio is 3.73 You can use your vin number abd call Chevy or a axle place like Jaspers
How many quarts of oil for oil change for 1989 Chevy 3500?
The oil used for a 4 cylinder and a 6 cylinder and an 8 cylinder are all different. Add 4.5 quarts for an 8 then check when warm. Put 3.5 for a 6 and check when warm. Add 3.5 to a 4 and check when warm. Add to the full line after checking when warm. You can do just as much damage to an engine overfilling the oil as you can without enough.
What part number are stock steel main bearing caps on a small block Chevy?
They do not have an independent part number, as they are matched to the block they come with. So, the number on the bellhousing flange, would include the caps.
Where is the transmission refill location on a 2005 Chevy Equinox?
It may not have one. Some late model GM vehicles have a sealed A/T with no provision to check or add fluid by the consumer. Check your owner's manual to be sure.
How much would a project 1961 Chevy Bel-air 2 door post be worth?
The satisfaction of showing you can do such a project and providing info for others who may have something similsr in mind. You dont get money for posting. ;-p
A Chevrolet car produced in the 60's that had a rear air cooled engine. Ralph Nader became famous for having it removed from the market as being dangerous.
How do you take off a gas tank on a 1988 Chevrolet pick-up diagram if possible?
The easiest way is to first remove the bed to access the fuel sending unit plus it gives more room to unbolt the hangers.
Idle fuel mixture setting for 68 250 Chevy?
the best way to set the idle mixture screw is with a gas analyzer. setting the mixture to 14:1. if you dont have one use a vacuum gage and set for the highest vacuum. If you dont have one of them then turn the screw in til the engine starts to stumble. then turn the screw out til the engine starts to stumble. turn the screw back in half the distance. that will be your best setting. Any leaner and the engine wont start, any richer and the engine will flood.
POS is short for POINT-OF-SALES system.
If you have ever been in a wawa gas station or a retail store like WalMart and purchased something then you have used or seen a POS System.
All DATA sales read and store to a database.
Point of sale (POS) systems are used by hundreds of businesses in order to streamline the purchasing process as well as track the various financial and inventory data that relates to the sales made. The term point of sale (POS) system is actually fairly self explanatory; it is the software used by businesses to process purchases. You can find POS systems at retail locations, amongst other places, worldwide if you just visit the checkout line.
What are Chevy 291 cylinder heads off of?
THESE HEADS CAME OFF 60"S MODEL NOVAS CHEVELLES AND SOME 302 CAMARO
Will a V8 fit into a 1980 Chevy monza?
The answer is yes!! Earlier years offered a V8 version and those motor mounts will work for the 1980 version. I had a 350 mounted in mine. You also need to find the shorter turbo 350 trasmission that mounts with the Chevy V8. This was my first engine swap and there were only a few complications. It's a tight fit and changing spark plugs is tough. With the standard rear end you can light up the tires at 25 mph with no problem.
What is base timing for a small block Chevy with a performance cam?
4 degrees advanced initial, or about 30, total.
How do you set timing on a small block Chevy with a performance cam?
Start at 6 degrees advance, (BTDC) and go up from there until the motor pings, under load. Then back off a couple of degrees. That is called power timing it. You will probably end upabout 10 degrees, advanced. If it cranks over hard, when hot, back it off a couple of degrees.
What type of engine oil for a 2003 Chevy 2500?
sometimes it's mentioned on the dipstick or on a sticker underneath the hood
Can be normal if it happens at a traffic light and again once you get moving again. Might still have some air left in the cooling system. Sometimes tricky to get it all out. Just taking the cap off the tank and running it for sometime will help, often times just drive it with eventually get rid of the air.
Hopefully it's not a leaking head gasket!
How do you bleed brakes on a 2000 Chevy 1500?
you can gravity bleed by opening up bleed valves,pump them up using a someone to open bleeder valves when there is pressure,vacuum bleed with a vacuum pump ,but you might have to use a scan tool to open up abs solenoids to bleed brakes.
