0
Cleaning
There are many types of cleaning that need be done around the house. There are also many methods, tips, and tricks on how to clean. These question and answers about types and ways of cleaning.
11,817 Questions
Yes, oven cleaners can be corrosive due to the strong chemicals they contain, such as lye or sodium hydroxide. It is important to carefully follow safety instructions when using oven cleaners to avoid skin irritation or damage to surfaces.
Dish soap is a cleaning agent specifically formulated for washing dishes. It helps to remove grease, food particles, and dirt from dishes and utensils. It creates suds that help to lift and rinse away the contaminants, leaving dishes clean and ready to use again.
I poured the boiling hot water over my teabag, and read a few pages of the new John Grisham novel as my tea steeped.
How can you prevent candle wax from sticking?
I always had a problem with the melted wax sticking to my candle holders and ended up either scratching or breaking them trying to get the wax off. I was looking on ebay and found a product that makes the wax not stick at all. It's called Candle Care. It is a 6oz. bottle. It lasts a long time and it works great!
How do you remove the white hazy film left by Mop and Glo Orange Glo from hardwood floors?
Do NOT use this Orange Glo product nor buy any of the ebooks folks are trying to sell you on how to remove the build up/haze. I called Orange Glo's customer service line directly and found out how to remove this product off the floor. Their solution? Plain old ammonia and good old fashioned hands and knees elbow Yup, an entire weekend on my hands and knees, to get the floors back to their original luster because there was so much build up on them.
We've been using this product and at first it really looked nice but then the floors started looking dull and very scratched up. I didn't understand why and then noted streaks where some parts of the floor were shiny and others were dull so I scraped with my fingernail and removed some product. Underneath it was shiny. So I decided to Google and found that lots of people were having the same problem!
Directions from Orange Glo's customer service line:
1. Mix 1/2 cup of ammonia with 1 gallon of warm water.
2. Apply solution to floor with mop in inconspicuous place first to test.
3. Once you determine it's okay to use on your floors...apply to floor and let stand for 5 minutes.
4. Wipe up the solution with a clean soft cloth.
5. Wipe with circular motion if there is more of a build up.
6. According to how much build up you have...you might have to repeat the process until it's all off.
I'm very disappointed this product is still being sold in stores as no one should ever use this on their floors!
P.S. I'm a housewife so anyone wasting their time changing this answer to promote the sell of their eBook will get frustrated REALLY quick! .
How do you use hydrated lime for cleaning up sewage spills?
Department of Environmental Conservation (State of Alaska)
Standard Procedures for Cleaning Up
Domestic Wastewater Spills Outdoors
The following are recommended procedures for cleaning up untreated or inadequately treated sewage, spilled to the ground surface.
1. In all conditions:
A. If the area in which the spill occurred is accessible to the public or domestic pets, the contaminated area must be clearly marked or cordoned off to restrict access.
B. Protective clothing (at a minimum, rubber or latex gloves and rubber boots) should be worn when cleaning up a sewage spill. (Dispose of gloves and wash rubber boots when leaving spill site). Keep children and interested bystanders away from cleanup activities.
C. Please note that hydrated lime is a caustic material and can be dangerous to handle and apply. Lime should only be used or applied by people experienced in using this material.
D. Do not mix cleaning / disinfecting products or chemicals. Cleaning products can react with one another to produce toxic vapor or liquid substances.
- In non-freezing conditions, when sewage is a mixture of liquid and solid material, the following steps should be taken:
A. If the spilled material can't be recovered using hand tools, a commercial vacuum / pump truck should be called to remove all visible liquid and solid material.
B. When the area is visibly clean, either a chlorine / water solution (using Clorox or an equal bleach) or hydrated lime should be applied to the spill area to disinfect. To make a 5% chlorine solution, add 3/4 cup Clorox bleach to one (1) gallon of water. You can verify the chlorine concentration by using test paper available at food supply warehouses or chemical supply companies. ONLY USE BLEACH THAT HAS "SANITIZES" OR "KILLS GERMS" ON THE LABEL.
If the spill occurred in a heavily populated area and odor may be an issue or within 100 feet of surface water, hydrated lime should be applied to the area in place of chlorine bleach. Enough hydrated lime should be applied to raise the pH to at least 12. By raising the pH to 12 for at least 1 hour, the area will be disinfected. You can test the pH by using litmus paper obtained at a chemical supply facility. Because lime is a caustic material, access to the area treated with lime must be restricted during the disinfection period.
C. After the spill area has been cleansed (24 hours after the chlorine solution or hydrated lime has been applied), the barriers may be removed and access to the area restored.
- In freezing or frozen conditions.
A. An attempt should be made to clean up the spill before it becomes completely frozen.
B. If possible, the frozen sewage should be removed down to the natural ground surface (or at least one inch below the spilled sewage if on thicker ice) and the recovered material disposed of properly. This could require that approval be obtained from the local government for disposal in a permitted landfill. An acceptable alternative solution is to stock pile the frozen sewage in an approved lined containment area until conditions are more favorable for transport and disposal. (Because each spill site and situation is different, please contact you local ADEC office for recommendations regarding constructing an acceptable containment area.) If the material thaws, the liquid must be properly handled and disposed of at a permitted wastewater treatment and disposal facility. Keep in mind that frozen and / or thawed sewage may still contain active, harmful bacteria, cysts and viruses.
C. When the area is visibly clean, either a chlorine / water solution (using Clorox or an equal bleach) or hydrated lime should be spread across the spill area to disinfect. You can verify the chlorine concentration by using test paper available at food supply warehouses or chemical supply companies.
D. If the spill occurred in a heavily populated area and odor may be an issue or within 100 feet of surface water, hydrated lime should be applied to the spill area in place of chlorine bleach. The hydrated lime will raise the pH to 12, which will disinfect the area. By raising the pH to 12 for at least 1 hour, the area will be disinfected. You can test the pH by using litmus paper obtained at a chemical supply facility. Because lime is a caustic material, access to the area treated with lime must be restricted during the disinfection period.
E. When the spill area has been cleansed (24 hours after the chlorine solution or hydrate lime has been spread), the barriers can be removed and access to the area restored.
NOTIFY YOUR LOCAL ADEC OFFICE WHEN CLEANUP IS COMPLETE.
You spilled nail polish and it has stained your hands how can you get if off?
You can try using nail polish remover to clean the stain off your hands. Alternatively, you could also try rubbing alcohol or lemon juice mixed with baking soda to help lift the stain. Remember to moisturize your hands afterwards as these methods can be drying.
Cloth can be heavier than paper depending on the specific type and thickness of the cloth and the paper being compared. Generally, cloth tends to be denser than paper, which can make it heavier for the same size.
What can clean jewelry better coke or lemonade?
I wouldn't use either. There is a way better method and you can use house hold items to make the solution.
Mix half water and Mr. Clean with a small amount of ammonia. Soak for 15 seconds then rinse with water and dry. This works well with all types of jewelry.
If you are trying to remove tarnish from sterling silver jewelry a mixture of baking soda and water to make a paste works well. Rub the paste on the sterling and then rinse in water and dry.
What kind of sound is used for cleaning glassware?
Ultrasound is commonly used for cleaning glassware. The high-frequency sound waves create cavitation bubbles that implode, releasing energy that helps to remove dirt and grime from the surfaces of the glassware.
Is sniffing dry erase markers harmful to lungs and brain?
Yes, sniffing dry erase markers can be harmful to both the lungs and the brain. The fumes emitted from dry erase markers contain volatile organic compounds (VOCs) that can irritate the lungs and may lead to symptoms like dizziness, headaches, and nausea. Prolonged exposure to these fumes can also impact brain function and may cause long-term health effects. It is important to use these markers in a well-ventilated area and avoid inhaling the fumes.
How do you remove Vicks vapour rub stains from clothing?
To remove Vicks VapoRub stains from clothing, start by scraping off excess residue with a blunt knife. Apply a pre-wash stain remover or liquid laundry detergent directly onto the stain, then wash the garment on the hottest water temperature recommended for the fabric. Check the stain before drying, and repeat the process if needed.
How do I remove Vicks vapour rub from clothing?
To remove Vicks Vapor Rub from clothing, first scrape off any excess using a spoon or dull knife. Then apply a pre-treatment stain remover or liquid laundry detergent directly to the affected area. Wash the clothing in the hottest water temperature allowed by the garment care label. Repeat the process if needed before drying the garment.
W2what is 1 chemical that is used to eliminate stains from clothing?
Bleach is a common chemical used to eliminate stains from clothing. It works by breaking down pigments and making them easier to remove during the washing process. However, it is important to use bleach carefully, as it can cause damage to certain fabrics and colors.
What are the variables for cleaning pennies with pop?
Usually pennies are cleaned by coke. One of the ingredients in Coke is phosphoric acid, a medium strength acid that is used in the production of agricultural fertilizers. It's the phosphoric acid that enables Coke to get stuff off dirty pennies.
How to remove yellowing from white clothes?
It's best to first know the nature of the yellowing, and determine the type of fabric. If the yellowing is caused by rust in the water, a chemical used for removing iron from clothing can be used by following the instructions on it's container. There are a variety of bleaches available for laundry use in the detergent section of your local grocery store, if the yellowing is simply from wear. Many bleach alternatives are also available. Always read the label on any particular article of clothing before determining your cleaning method.
How do you get out a pen stain?
To get out a pen stain, try using rubbing alcohol, acetone, or a stain remover specifically designed for ink stains. Apply the solution onto the stained area, let it sit for a few minutes, then blot with a clean cloth. Repeat the process until the stain is removed, then wash the item as usual.
What is a strong chemical used to kill microbes?
One strong chemical used to kill microbes is bleach, which contains the active ingredient sodium hypochlorite. Bleach is highly effective at disinfecting surfaces and eliminating a wide range of bacteria, viruses, and fungi.
How is air pressure used in a vacuum cleaner?
Air pressure is used in a vacuum cleaner to create suction. The motor inside the vacuum cleaner generates a lower air pressure inside the machine, causing outside air to rush in with force through the nozzle. This rapid movement of air allows the vacuum to pick up dirt and debris from surfaces.
How do you clean fog out of glassware?
To clean fog out of glassware, mix equal parts white vinegar and water in a spray bottle. Spray the solution onto the fogged glassware and wipe it clean with a microfiber cloth. The vinegar helps to break down the foggy residue and leaves the glassware clear and streak-free.
How do you remove blood stains from clothes?
Hydrogen peroxide works wonders to remove blood from clothing. Soak the item in cold water for about 15 minutes, then pour hydrogen peroxide right onto the stain. Keep dabbing the stain until it comes out. Make sure to rinse the item thoroughly with cool water and then machine wash in cold water to make sure that all of the peroxide is out of the fabric.
Ratio of bleach to water to remove mold?
Im in construction in the southern U.S. mainly Texas and we always have mold problems on fire walls and sheetrock. These ratio's have worked wonders for me and saved my companies thousands of dollars im sure. You can do a 50/50 ratio of bleach and water or for even better results add a little TSP. If you have a big job to do get a 5 gallon bucket fill with 2 gallons water 2 gallons bleach and 2 cups TSP. Furthermore for smaller jobs use 3 cups water 3 cups bleach and 2/3 cup TSP. You can also try a little less bleach in some cases if these ratio's dont work.
Thanks, Spencer Stein
How do you get charcoal out of carpet?
To remove charcoal from carpet, first scrape off as much excess charcoal as possible without spreading it further. Then, use a vacuum cleaner to suck up the remaining particles. Finally, blot the area with a mixture of dish soap and water followed by rinsing with clean water.
Febreze is a brand of air freshener and odor eliminators produced by Procter & Gamble. It is designed to help eliminate unwanted odors in the air or on fabrics by trapping and neutralizing them rather than just masking them with fragrance.
What is the active ingredient in naval jelly?
The active ingredient in naval jelly is phosphoric acid. It is a rust removal product used to dissolve and remove rust from metal surfaces.
