0
Density
Density is mass per unit of volume. Density also shows how tightly packed in molecules are in a material and also help determine buoyancy.
1,201 Questions
What is the most dense form of water?
Ice is the most dense form of water. When water freezes into ice, its molecules arrange in a way that makes ice denser than liquid water, which is why ice floats on water.
What is the density of rubidium?
The density of rubidium is approximately 1.532 grams per cubic centimeter at room temperature.
Which is the density of latex?
The density of latex is about 920 to 960 kg/m3 or 0.92 to 0.96 g/cm3. The SI density standard is kg/m3.
How do you find the density of a penny?
To find the density of a penny, you would measure its mass using a scale, then measure its volume by water displacement or using a caliper to measure its dimensions. Divide the mass by the volume to calculate the density of the penny.
No. Density is a ratio; it is mass divided by volume. Anything that you can weigh has a non-zero density, but the weight of the thing is related to its mass and the gravity where it is being measured. You could have two objects of vastly different density, but the weight of the objects could be the same.
What does a density of 2.7 mean?
The density of 2.7 means that 1 cubic centimeter weighs or has a mass (technically) of 2.7g. Anything above ther density of water (around 1g/cc) will sink, the same willf loat, and below will float but shoot up if placed fully under the water e.g. floating board pushed under the water will shoot up into the air.
The density of flint is around 2.5-2.65 grams per cubic centimeter.
What is oxygen packing density?
Oxygen packing density refers to the amount of molecular oxygen that can be contained in a given volume or space. It is commonly used in the context of oxygen storage systems, such as oxygen tanks or containers, to determine how much oxygen can be stored in a specific volume. The higher the oxygen packing density, the more oxygen that can be stored in a smaller space.
Density is calculated by dividing the mass of an object by its volume. The formula for density is: density = mass / volume. Density is typically expressed in units such as g/cm^3 or kg/m^3, depending on the units of mass and volume used in the calculation.
I just weighed 1.5 cups (355 cc) of granulated table sugar, and it came out to be 11 oz (312 grams). So based on this one rough measurement, I'd say the density of table sugar is about .88g/cc.
Wolfram Alpha says the density is 1.29 g/cc, but that probably is not taking into consideration the air between granules.
Mass over Volume.
D=M/V
Use metric, so mass in grams or KG and Volume in mL or cc (cubic centimeters) mL and cc are the same measurement, 10 mL or water is the same as 10 cc.
If you used grams and mL, you would get an answer like x g/mL.
For example:
If you have 1 mL of water and it weighs 100 grams, you dive the 100 grams by 1 mL, so the density is 100 g/mL. (water's density is ACTUALLY about 1)
that's a true fact {kl}
* * * * *
The density of water is not 1 because it must have units of measurement. It is about 1 gram per cc or 1 gram per ml or 1 kilogram per litre. The density of water can also be given [correctly] as approximately 1000 grams per litre or 0.001 kg per cc.
What is the density of a pearl?
The density of a pearl typically ranges from 2.60 to 2.85 grams per cubic centimeter. This can vary depending on the type of pearl and its composition.
I believe that it may be the same (or similar) to bulk density
The density of water at 25°C is approximately 1 gram per cubic centimeter.
Density is equal to the mass of an object divided by its volume. It is a measure of how much mass is packed into a given volume of space. The units of density are typically expressed in grams per cubic centimeter or kilograms per cubic meter.
Calculate density of an object submerged in water?
Step 1:
Weight Object
Step 2:
Submerge object in a volumetric piece of glassware noting the volume before and after submerging. You can subtract the two volume values to determine the volume of the object--since it will displace it's own volume while submerged.
Divide mass of object by the volume of water the object displaces to get the density.
If this is that more involved question involving the density of the object and distance traveled over time let me know, I can solve that one too!
What is the density of chloride?
Chloride is an ion. It cannot exist alone, but must be with some positive ion. Potassium chloride, sodium chloride, lithium chloride, copper (II) chloride, etc. are compounds and each has a certain density.
The density of a pencil can vary depending on the material it is made of. For example, a wooden pencil typically has a density of around 0.6 grams per cubic centimeter, while a mechanical pencil made of metal may have a higher density of around 7.8 grams per cubic centimeter.
How do you calculate the mass of water from its density?
To calculate the mass of water, you can multiply the density of water (1 g/cm3 or 1000 kg/m3) by the volume of water. The formula is: mass = density x volume. For example, if you have 1 liter of water, the mass would be 1000 grams.
The density of nitrogen gas at standard conditions (0°C and 1 atm pressure) is approximately 1.25 grams per liter. Nitrogen gas is less dense than air, which is why it is often used to displace air in certain applications.
Yes, oxygen has a density of around 1.429 grams per liter at standard temperature and pressure. It is denser than air, which is a mixture of gases that includes oxygen.
What is density determined by?
Density is determined by two measurements: the mass and volume of an object. The quotient of the mass and volume (mass divided by volume) is density. It can be represented as grams per milliliter (g/mL).
Density is mass per unit volume ie the mass of an object divided by its volume: density = mass/volume So if the mass is measured in kilograms (kg) amd the volume in cubic metres (m-3) the density is given in units of kg.m-3 It makes no difference to the definition if the object is a solid, liquid or a gas. See http://www.zyra.org.uk/density.htm http://physics.about.com/od/fluidmechanics/f/density.htm
The density of Freon can vary depending on the specific type being referenced. However, commonly used types like Freon-12 (dichlorodifluoromethane) have a density of around 1.2 grams per cubic centimeter at room temperature and pressure.
