answersLogoWhite

0

🧪

Magnetism

Magnetism is simply an abstraction that people use for the changes in electromagnetic force created by the motion of electric charges. There are different types of magnetism that include electromagnetism, ferromagnetism, paramagnetism, and diamagnetism. To learn more and share your knowledge of magnetism and its types, ask and answer questions here.

4,020 Questions

What part of a magnet is concentrated?

it isn't, a magnet contains electrons and neutrons which connect to the electrons and neutrons in metal!

Is Scheelite magnetic?

No, scheelite is not magnetic. It is a non-magnetic mineral that is commonly found as a tungsten ore.

What happens when both ends of a magnet meet?

When both ends of a magnet meet, like poles will repel each other and opposite poles will attract each other. If they are aligned in the same direction, the magnets will stick together due to magnetic attraction. If they are aligned in opposite directions, the magnets will push away from each other due to magnetic repulsion.

Does soaking a magnet in water affect its power?

No, soaking a magnet in water does not affect its power. Magnets are typically not affected by water or other liquids, so it should not impact its magnetic strength.

Do magnets attract aluminum bike frame?

No, magnets do not attract aluminum bike frames. Aluminum is not a magnetic material, so it does not respond to magnetic fields like iron or steel does.

How magnet detect real gold?

Gold is non-ferrous and therefore is not attracted by a magnet. There are other metal that are attracted by a magnet but gold is not one of them. You can tell what is a ferrous metal and what is a non ferrous one but you cannot identify gold.

Why does north magnet and north magnet don't stick together?

Like poles of a magnet repel each other due to the magnetic field forces. When two north poles are brought close, the magnetic fields push against each other, causing them to repel rather than attract. This phenomenon follows the basic principle of magnetism where opposite poles attract and like poles repel.

Why deviation card of magnetic compass made on north hemisphere not suitable for south hemisphere?

The deviation card of a magnetic compass is specific to the location and magnetic conditions where it was calibrated. Deviation values change when crossing the magnetic equator due to differences in magnetic variation between the two hemispheres. Therefore, a deviation card calibrated in the northern hemisphere may not accurately represent the deviations experienced in the southern hemisphere.

Do horse shoe magnets have separate poles?

Yes, horseshoe magnets have two poles just like bar magnets - a north pole and a south pole. The poles are located at the ends of the horseshoe shape.

Why does the N pole of a compass points toward northern Canada using the terms magnetic pole and magnetic field?

The N pole of a compass points towards northern Canada because Earth's magnetic field is generated by the movement of molten iron in its outer core. The Earth's magnetic north pole is located near northern Canada, so the N pole of a compass aligns with this magnetic field direction.

What are magnets used for in the past?

In the past, magnets were used for compasses for navigation, including in exploration and sailing expeditions. They were also used in tools such as magnetic needles and magnetized chisels for various purposes.

Is copper the best for making the coil of a magnet?

Copper is a commonly used material for making the coil of a magnet due to its high electrical conductivity and flexibility. It allows for efficient transfer of electrical current to create a magnetic field. However, other materials such as aluminum or silver can also be used depending on specific requirements.

How does a fan use magnet?

A fan uses magnets by generating a magnetic field that interacts with electric current, which creates a force that drives the fan blades to rotate. This rotation creates airflow, providing cooling or ventilation in various applications. Magnets play a crucial role in converting electrical energy into mechanical energy in a fan.

Why are the colors in the electromagnetic spectrum put in that order?

The colors in the electromagnetic spectrum are put in that order based on their wavelengths. Shorter wavelengths correspond to higher frequencies and are seen as violet, while longer wavelengths correspond to lower frequencies and are seen as red. This progression follows the visible light spectrum from shortest to longest wavelengths.

Is ZnO magnetic?

ZnO is not inherently magnetic because it is a diamagnetic material, which means it is weakly repelled by magnetic fields. However, it can exhibit some magnetic properties when doped with certain magnetic elements or subjected to specific conditions.

What happens when you push 2 horseshoe magnets together?

When you push two horseshoe magnets together with like poles facing each other, they will repel each other due to the magnetic force. If you turn one of the magnets around so that opposite poles face each other, they will attract each other.

How magnetism is used in cellphones?

Magnets are used in cellphones for various purposes, such as the speaker and microphone to convert electrical signals into sound waves and vice versa. They are also found in the vibration motor for notifications and in some cases, as part of the compass sensor for orientation detection.

What is the South Pole's magnetic charge?

The South Pole of the Earth's magnetic field is considered to be the magnetic south pole, where the magnetic field lines point into the Earth. This is opposite to the geographic south pole, which is the point that lies at the southernmost tip of the Earth's axis of rotation.

Can lodestone pick up paperclips?

No, lodestone is a natural magnet that attracts objects containing iron, such as iron ore or steel. Paperclips are typically made of steel, so a lodestone would be able to pick them up.

How do you demagnetize yourself?

To demagnetize yourself, you can try techniques such as grounding yourself by walking barefoot on grass or sand, taking a salt bath, or using visualization exercises to release any stored energy. Additionally, spending time in nature or practicing mindfulness can help restore balance to your electromagnetic field.

How do you demagnetize a metal tool?

There are probably several ways, but I'm aware of, and for years have only used, one. This works for relatively small ferrous [magnitizable] objects such as for example, screws, nuts, washers, bolts, screwdrivers, pliars, and other hand tools. An alternating current magnetic field is requrired, and the best "tool" which I have found for that is a "Video/Audio Tape Eraser." These can be found a most electronic equipment stores, and I got mine years ago at Radio Shack ["High-Power Video-Audio Tape Eraser, Catalogue No. 44-233A"]. This unit is powered by plugging into any standard household duplex 120 volt electrical outlet. The unit is turned on and off with a momentary-type "trigger switch." Simply follow the included instructions, which for my unit, I quote [there are NO copyright or trademark symbols on these instructions] as follows. "How to use

1. Plug into a standard 110-120V AC power outlet.

2. Select a tape [or similar small object]...

3. Hold the eraser in your hand and squeeze the trigger. The red light indicates that the unit is operating.

4. While squeezing the trigger, place the bottom of the eraser in contact with the item to be erased. Move the eraser slowly in a circular motion over the entire product area but do not release the trigger yet.

Make circular passes arount the tape for approximately 10-20 seconds, then slowly withdraw the eraser until it is about three feet away from the tape. Now release the trigger.

5. Turn the cassette or diskette over and repeat steps 3 and 4. NOTES: Different magnetic tapes [or items/tools] may require different erasure times. A typical tape will require 10-20 seconds, but some tapes [tools] may require a longer time.Metal tapes require a minimum of 20 seconds per side.

Do not use the eraser for longer than one minute at any one time. After one minute of use, let the eraser cool for at least 30 minutes. CAUTION: Do not use this Video Cassette Tape eraser near delicate instruments, electronic watches, cardiac pacemakers, or prerecorded tapes films, or disks." End of instruction quote. The larger [more metal mass of] the object, the longer contact time within the magnetic field of the eraser is required. As the power of a magnetic field decreased with the square of the distance from an object, and the power of the eraser/demagnitizer is very small, it is critical that the eraser be used [in the first part of the demagnitization] in DIRECT CONTACT with the item to be demagnitized. Also, although I do not know the limits, there is a point in size of the object to be demagnitized, where the eraser unit, which was designed for audio/video tapes and cassettes, will NOT have the necesary power to successfully demagnitize the object. Over the years, I have heard that a "degaussing [sp?] coil" removed from an old television will work, BUT unless one has a great knowledge of safe electrical practice, this is NOT a good idea, as it is very easily possible to electrocute one's self using this method. Since you had to ask this question, I suspect that this second method is NOT SAFE for your use.j3h. If yo have a piece of iron based material, you can heat the metal to a high temperature or you can pound the metal with a hammer. Each of these will disorient the atoms and the magnetic field will be eliminated.

How does junkyard crans use magnets?

Junkyard cranes use magnets to attract and pick up metal objects, such as cars and other scrap metal. The magnets create a strong magnetic field that can securely hold the metal items while they are being lifted and moved around the junkyard. This method is efficient and helps with the organization and sorting of materials in the junkyard.

How do you magnetise copper?

Copper is not inherently magnetic, so it cannot be magnetized in the traditional sense like iron or steel. However, you can induce a magnetic field in copper temporarily by placing it in a strong magnetic field, passing an electric current through it, or using special techniques like the Faraday effect.

Is magnetic force a good force or bad?

Magnetic force is neither good nor bad; it is a fundamental force of nature that can have positive or negative effects depending on how it is used. It is commonly utilized in technology such as MRI machines, magnetic levitation trains, and electric motors, but can also cause issues like data corruption in electronic devices or interference with navigation systems.

What is dumb bell shaped magnet called?

A dumbbell shaped magnet is typically referred to as a bar magnet due to its elongated shape resembling a bar or rod. These magnets are commonly used in various applications requiring a strong, elongated magnetic field.