Acura RSX

For the Acura RSX base model, it's recommended to use a high-quality 75W-90 gear oil for the manual transmission. Look for oils that meet or exceed the API GL-4 specifications. Brands like Honda Genuine, Royal Purple, or Mobil 1 are popular choices among enthusiasts. Always consult your owner’s manual for specific recommendations and capacity.

To advance the timing on a RSX Type S, you can adjust the ignition timing by using a timing light to check the current timing and then slightly loosen the distributor bolts to rotate the distributor. Moving it clockwise will advance the timing, while counterclockwise will retard it. Make small adjustments and always ensure to check for any knocking or detonation after making changes. Additionally, consider using a tuned ECU or aftermarket engine management system for more precise control over timing.

To change the license plate bulb on a 2002 Acura RSX, first, locate the license plate light assembly, which is usually found above the license plate. Use a flathead screwdriver or a small tool to gently pry off the cover of the light assembly. Once exposed, twist the old bulb counterclockwise to remove it, then insert the new bulb and twist it clockwise to secure it. Finally, replace the light cover and ensure it’s properly snapped into place.

A diagnostic code P1162 on an Acura RSX-S typically indicates an issue with the air-fuel ratio (AFR) sensor, specifically related to the sensor's circuit performance. This code often suggests that the sensor is providing readings that are out of expected range or that there is a problem with the wiring or connectors associated with the sensor. Common causes include a faulty AFR sensor, damaged wiring, or poor electrical connections. Addressing these issues usually involves inspecting the sensor and its connections, and replacing the sensor if necessary.

No, not all oil pans are the same for the RSX Type S. While the oil pans for the RSX Type S may share similarities with other models in the Acura and Honda lineup, differences in design, capacity, and mounting points can exist. It's important to use the specific oil pan designed for the RSX Type S to ensure proper fitment and performance. Always consult the vehicle's specifications or a trusted mechanic when replacing parts.

To change the automatic transmission fluid in an Acura RSX, first, ensure the vehicle is on a level surface and the engine is warm. Disconnect the transmission fluid drain plug, allowing the old fluid to drain into a pan. Replace the drain plug, then use a funnel to refill the transmission with the appropriate type of new fluid through the dipstick tube. Finally, start the engine, let it run for a few minutes, and check the fluid level, adding more if necessary.

In the Acura RSX, the fuse for the alarm system is typically located in the under-hood fuse box. This box is usually found near the battery. You can identify the specific fuse for the alarm by checking the diagram on the fuse box cover or referring to the owner's manual for the exact fuse designation.

To adjust the headlights on an Acura RSX, first park the car on a level surface about 25 feet away from a wall. Turn on the headlights and use a screwdriver to adjust the vertical and horizontal alignment by turning the adjustment screws located on the headlight assembly. Aim the top of the beam just below the height of the headlights and ensure the beams are centered. Finally, check the adjustment by observing the beam pattern on the wall.

To check a coil pack on an Acura RSX, first, ensure the engine is off and cool. Disconnect the negative battery terminal, then remove the engine cover if necessary. Unplug the electrical connector from the coil pack and unscrew it from the engine. You can use a multimeter to test the primary and secondary resistance of the coil pack; compare the readings to the specifications in the service manual to determine if it's functioning properly.

To replace the headlight bulb on a 2002 Acura RSX, first, open the hood and locate the back of the headlight assembly. Disconnect the power connector by gently pulling it off, then remove the rubber dust cover. Twist the bulb socket counterclockwise to release it, then pull out the old bulb and insert the new one, ensuring not to touch the glass. Finally, reassemble by reversing the steps and test the new bulb.

To change the fuel filter on a 2005 Acura RSX, first, relieve the fuel system pressure by removing the fuel pump fuse and running the engine until it stalls. Next, disconnect the negative battery cable, then locate the fuel filter, which is typically near the fuel tank. Use appropriate wrenches to disconnect the inlet and outlet fuel lines, and replace the old filter with a new one, ensuring the flow direction matches the markings. Finally, reconnect everything, replace the fuse, and start the engine to check for leaks.

The Acura TL typically requires about 4.5 to 5 quarts of oil, depending on the specific model year and engine type. It's always best to consult the owner's manual for the exact oil capacity and specifications for your particular vehicle. Additionally, using the recommended oil type is essential for optimal performance.

To reset the speedometer on your Acura RSX after upgrading from 17 to 18-inch wheels, you'll need to recalibrate it to account for the difference in tire circumference. You can do this using an OBD-II scanner that has the capability to adjust the vehicle's speedometer settings. Alternatively, you may also consider reprogramming the speedometer through a performance tuning shop, which can adjust the settings based on the new tire size. Always ensure that your new tire size is compatible with your vehicle's specifications for accurate readings.

To unlock the radio code for a 2005 Acura RSX, you typically need the radio serial number, which can be found on the radio unit itself or by checking the owner's manual. You can retrieve the code by contacting an Acura dealership or using the Acura website, where you may need to provide the vehicle's VIN and the radio serial number. If the radio is locked due to multiple incorrect code attempts, it may require a reset by a professional.

The Acura RSX fan switch sensor is typically located near the radiator or on the engine's coolant outlet. It is designed to monitor the coolant temperature and activate the radiator fan when necessary. To access it, you may need to remove some components for better visibility, depending on the specific model year. Always refer to the vehicle's service manual for precise information and guidance.

To program a 2003 Acura RSX keyless remote, start by sitting in the vehicle and closing all doors. Insert the key into the ignition and turn it to the "On" position (not starting the engine) and then back to "Off" twice, ending in the "Off" position. Press the "Lock" button on the remote within five seconds, and the doors should lock and unlock, indicating successful programming. If you have additional remotes, repeat the process for each one within 10 seconds.

On a 2002 Acura RSX, the fuel filter is located along the fuel line, typically mounted on the driver's side of the vehicle, near the rear axle. It is usually positioned under the car, just in front of the fuel tank. To access it, you may need to lift the vehicle and remove any protective covers. Always ensure the car is securely supported before attempting any maintenance.

In a 2003 Acura RSX, the starter is located on the engine block, near the transmission. Specifically, it can be found on the lower side of the engine, towards the passenger side. To access it, you may need to remove some components or covers, depending on the specific layout of the engine bay.

The air filter on a 2002 Acura RSX is located in the engine bay, specifically within the air cleaner assembly. To access it, you'll need to remove the air intake duct connected to the throttle body and then unclip the air cleaner cover. Once the cover is removed, you can take out the old air filter and replace it with a new one.

The starter on a 2003 Acura RSX is located on the driver's side of the engine, near the transmission. It is positioned at the bottom of the engine bay, making it somewhat challenging to access. To replace or service the starter, it may be necessary to remove some components for better visibility and access.

The average cost to replace the exhaust system in a 1995 Toyota Camry typically ranges from $500 to $1,200, depending on factors like the type of parts used (aftermarket vs. OEM), labor costs in your area, and any additional repairs needed. If you choose to replace the entire system, including the catalytic converter and muffler, costs may be on the higher end. It's advisable to get multiple quotes from local mechanics for a more accurate estimate.

To shut off the alarm horn in your Acura RSX, you can typically use the key fob to unlock the doors or press the panic button. If that doesn’t work, you can insert the key into the driver's door and turn it to unlock while holding it in the unlock position for a few seconds. If the alarm continues to sound, disconnecting the car battery for a short period can also reset the alarm system. Always refer to your owner's manual for specific instructions related to your vehicle model.

To change the battery in a 2004 Acura RSX, first, ensure the vehicle is turned off and parked on a level surface. Open the hood and locate the battery; disconnect the negative terminal (black) first, followed by the positive terminal (red). Remove the battery hold-down clamp, then lift out the old battery. Place the new battery in the tray, reconnect the positive terminal first, followed by the negative terminal, and secure the hold-down clamp.

In the Acura RSX, the remote wire in the wiring harness is typically the solid blue wire. This wire is used to turn on an external amplifier when the car's audio system is activated. It's essential to verify with a wiring diagram specific to your vehicle model and year, as wire colors can sometimes vary. Always ensure proper connections to avoid electrical issues.

To remove the gauge cluster on a 2003 Acura RSX, first, disconnect the negative battery terminal to ensure safety. Next, pry off the plastic trim surrounding the cluster, then remove the screws securing the gauge cluster in place. Carefully pull the cluster out, disconnect the wiring harnesses at the back, and you can then fully remove the cluster. Reinstalling is simply the reverse process.