Acura RSX

The ECU (Engine Control Unit) for a 2004 Acura RSX is typically located under the dashboard on the driver's side. It is mounted near the steering column and may be hidden behind a panel that needs to be removed for access. Be sure to disconnect the battery before attempting to reach or replace the ECU.

Yes, the Acura RSX is equipped with a VTEC engine. Specifically, the RSX features a 2.0-liter inline-four engine known as the K20, which utilizes Honda's VTEC (Variable Valve Timing and Lift Electronic Control) technology to optimize performance and efficiency. This system allows the engine to adjust its valve timing for better power delivery at higher RPMs while maintaining fuel economy at lower speeds.

To check the automatic transmission fluid level on a 2003 Acura RSX, start by warming up the engine and then shifting through all gear positions. With the engine running, locate the transmission dipstick, which is typically near the back of the engine compartment. Pull out the dipstick, wipe it clean, reinsert it, and then remove it again to check the fluid level; it should be within the marked range. If necessary, add the recommended transmission fluid through the dipstick tube using a funnel.

To replace the coolant reservoir on an Acura RSX, first, ensure the engine is cool and disconnect the negative battery terminal for safety. Remove the old reservoir by unclipping it from its mounts and disconnecting the hoses attached to it, taking care to catch any residual coolant. Install the new reservoir by securing it in place and reconnecting the hoses, ensuring a tight fit. Finally, refill the coolant system with the appropriate coolant mixture and check for leaks before reconnecting the battery.

The ECU (Engine Control Unit) on a 2005 Acura RSX is located under the dashboard on the driver's side. Specifically, it is situated near the kick panel, to the left of the steering column. To access it, you may need to remove the panel covering the area.

In an Acura RSX, the fuel filter is typically located along the fuel line, underneath the vehicle. It is often found near the fuel tank or along the frame rail, making it accessible from underneath the car. For some models, it may be integrated into the fuel pump assembly located inside the fuel tank. Always refer to the owner's manual or service guide for specific details related to your model year.

On a 2002 Acura RSX, the fuel filter is located on the driver's side, underneath the vehicle, near the fuel tank. It is typically mounted along the fuel line, making it accessible from the underside. To replace it, you may need to lift the car safely and disconnect the fuel lines carefully. Always ensure to relieve fuel system pressure before attempting any work on the fuel system.

The transmission oil capacity for the 2002 Acura RSX is approximately 2.7 quarts (2.6 liters) when using the manual transmission and around 4.0 quarts (3.8 liters) for the automatic transmission. It's important to check the owner's manual or consult with a professional for the exact specifications and any variations based on specific models or conditions.

To change the headlight bulb on a 2005 Acura RSX, first, ensure the vehicle is turned off and the keys are removed. Open the hood and locate the headlight assembly; for easier access, you may need to remove the battery or air intake duct. Disconnect the electrical connector from the bulb, then twist the bulb socket counterclockwise to remove it. Replace the old bulb with a new one, avoiding touching the glass with your fingers, then reassemble everything by reversing the steps.

A flashing green drive symbol on the dashboard of a 2002 Acura RSX indicates that the vehicle is in the process of shifting gears or that the automatic transmission is actively engaged in a shifting sequence. This behavior can also signify that the transmission is in a diagnostic mode or that the vehicle's onboard computer is recognizing an issue with the transmission system. If the light persists or is accompanied by other warning lights, it's advisable to consult the owner's manual or seek professional assistance.

For a manual transmission Acura RSX, it's recommended to use a high-quality synthetic or conventional manual transmission fluid that meets the specifications set by Honda. Typically, the Honda MTF (Manual Transmission Fluid) is preferred, as it’s specifically designed for Honda vehicles. Ensure the fluid meets the required viscosity and specifications outlined in the owner's manual for optimal performance.

To determine if you have an RSX or an RSX Type S, check the badging on the rear of the vehicle; the Type S will have a specific "Type S" badge. Additionally, the Type S model features a more powerful engine (2.0L K20Z1) compared to the standard RSX (2.0L K20A3), and it offers enhancements like a 6-speed manual transmission and sport-tuned suspension. You can also look for features like larger brakes and a more aggressive body kit on the Type S.

In the Acura RSX, the fuel pump relay is typically located in the under-hood fuse and relay box, which is situated near the battery. You can identify the relay by referring to the diagram on the cover of the fuse box, which provides information on the location and function of each relay. Always ensure the ignition is off before attempting to access or replace the relay for safety.

The relay for the headlights in a 2002 Acura RSX is typically located in the under-hood fuse box. To access it, open the hood and look for the fuse box near the battery. The relay is usually marked on the diagram found on the cover of the fuse box. If you're troubleshooting lighting issues, also check the fuses and wiring connections in this area.

For the Acura RSX base model, it's recommended to use a high-quality 75W-90 gear oil for the manual transmission. Look for oils that meet or exceed the API GL-4 specifications. Brands like Honda Genuine, Royal Purple, or Mobil 1 are popular choices among enthusiasts. Always consult your owner’s manual for specific recommendations and capacity.

To advance the timing on a RSX Type S, you can adjust the ignition timing by using a timing light to check the current timing and then slightly loosen the distributor bolts to rotate the distributor. Moving it clockwise will advance the timing, while counterclockwise will retard it. Make small adjustments and always ensure to check for any knocking or detonation after making changes. Additionally, consider using a tuned ECU or aftermarket engine management system for more precise control over timing.

To change the license plate bulb on a 2002 Acura RSX, first, locate the license plate light assembly, which is usually found above the license plate. Use a flathead screwdriver or a small tool to gently pry off the cover of the light assembly. Once exposed, twist the old bulb counterclockwise to remove it, then insert the new bulb and twist it clockwise to secure it. Finally, replace the light cover and ensure it’s properly snapped into place.

A diagnostic code P1162 on an Acura RSX-S typically indicates an issue with the air-fuel ratio (AFR) sensor, specifically related to the sensor's circuit performance. This code often suggests that the sensor is providing readings that are out of expected range or that there is a problem with the wiring or connectors associated with the sensor. Common causes include a faulty AFR sensor, damaged wiring, or poor electrical connections. Addressing these issues usually involves inspecting the sensor and its connections, and replacing the sensor if necessary.

No, not all oil pans are the same for the RSX Type S. While the oil pans for the RSX Type S may share similarities with other models in the Acura and Honda lineup, differences in design, capacity, and mounting points can exist. It's important to use the specific oil pan designed for the RSX Type S to ensure proper fitment and performance. Always consult the vehicle's specifications or a trusted mechanic when replacing parts.

To change the automatic transmission fluid in an Acura RSX, first, ensure the vehicle is on a level surface and the engine is warm. Disconnect the transmission fluid drain plug, allowing the old fluid to drain into a pan. Replace the drain plug, then use a funnel to refill the transmission with the appropriate type of new fluid through the dipstick tube. Finally, start the engine, let it run for a few minutes, and check the fluid level, adding more if necessary.

In the Acura RSX, the fuse for the alarm system is typically located in the under-hood fuse box. This box is usually found near the battery. You can identify the specific fuse for the alarm by checking the diagram on the fuse box cover or referring to the owner's manual for the exact fuse designation.

To adjust the headlights on an Acura RSX, first park the car on a level surface about 25 feet away from a wall. Turn on the headlights and use a screwdriver to adjust the vertical and horizontal alignment by turning the adjustment screws located on the headlight assembly. Aim the top of the beam just below the height of the headlights and ensure the beams are centered. Finally, check the adjustment by observing the beam pattern on the wall.

To check a coil pack on an Acura RSX, first, ensure the engine is off and cool. Disconnect the negative battery terminal, then remove the engine cover if necessary. Unplug the electrical connector from the coil pack and unscrew it from the engine. You can use a multimeter to test the primary and secondary resistance of the coil pack; compare the readings to the specifications in the service manual to determine if it's functioning properly.

To replace the headlight bulb on a 2002 Acura RSX, first, open the hood and locate the back of the headlight assembly. Disconnect the power connector by gently pulling it off, then remove the rubber dust cover. Twist the bulb socket counterclockwise to release it, then pull out the old bulb and insert the new one, ensuring not to touch the glass. Finally, reassemble by reversing the steps and test the new bulb.

To change the fuel filter on a 2005 Acura RSX, first, relieve the fuel system pressure by removing the fuel pump fuse and running the engine until it stalls. Next, disconnect the negative battery cable, then locate the fuel filter, which is typically near the fuel tank. Use appropriate wrenches to disconnect the inlet and outlet fuel lines, and replace the old filter with a new one, ensuring the flow direction matches the markings. Finally, reconnect everything, replace the fuse, and start the engine to check for leaks.