Area

11 (sq meters) = 118.403015 sq feet.

40 x 14 = 560 square inches

42 marla = 11434.5 sq ft

6.48 cu yards

The area of the room is 19*10 = 190 sq ft

Each tile is 1.5 ft *1.5 ft = 2.25 sq ft

So, you need an absolute minimum of 190/2.25 = 84.44... rounded up = 85 tiles.

However, that assumes that the offcuts can be used for tiling, and that you don't mind an area full of tiny bits. It would be more sensible to work along the following lines:

19 feet/1.5 ft = 12.67 rounded up = 13 tiles across the length

10 feet/1.5 ft = 6.67 rounded up = 7 tiles across the width.

So you would need 13*7 = 91 tiles and in this case offcuts do not need to be used.

Finally, if this is a real-life question, rather than a mathematical exercise, you would be well advised to make some allowance for wastage.

Please find a calculator. It will be a bit less than 4 but more than 3. I would say probably around 3.8

5248/144...

121

That depends entirely on the SIZE of the tiles !

A tile size of 1 ft2 would need 112 tiles, whereas a tile size of 6in2 would need 448 !

Let the parallels be x+3.5 and x with the height being x:

1/2*(sum of the parallels)*height = area

1/2*(x+3.5*x)*x = 46.5 cm2

Multiply both sides by 2 and multiply out the brackets:

x2+3.5x+x2 = 93

Collect like terms and form a quadratic equation:

2x2+3.5x-93 = 0

Using the quadratic equation formula gives a positive value of x as 6

Therefore the parallels are 9.5 cm and 6 cm in length.

Check: 1/2*(9.5+6)*6 = 46.5 cm2

Approximately 196.1 square feet.

Doesn't work.

Square millimeters is a unit for area, while meter is a unit for distance only. They don't compare.

You might as well ask about how fast a pound is.

1 sq yd = 9 sq ft. Multiply 200 by 9 to solve: (200 x 9 = 1800 sq ft)

Jennifer's Custom Slipcovering is one company that serves customers in south- eastern Michigan. They are located in Rochester Hills and can be reached at (248) 601-0564. There are also several online retailers of sofa slip covers including Sure-Fit Slipcovers, & Overstock.com.

you multiply the number by itself. this is called squaring.

* * * * *

Except that a metre is a measure of distance while a square metre is a measure of area. You cannot convert between an area and a distance.

216

Answer = 24/12 x 18/12 sq feet = 2 x 1.5 sq feet = 3 sq feet

9 sq ft = 1 sq yd

326.4 x 9 = 2937.6 sq ft

of course 12 square yard

400 x 122 / 24 = 400 x 12 / 2 = 2400 tiles if there is no waste.

110 feet by 396 feet is one acre

Unfortunately, 27 feet x 11 feet x 100 miles, regardless If we convert miles to feet, is going to result in cubed feet or even cubed miles after converting.

Imagine 5 meters x 5 meters x 5 meters = 125 meters³

None.

You cannot convert linear units to cubic units.