answersLogoWhite

0

🎒

Area

Area is a quantity expressing the two-dimensional size of a defined part of a surface; typically a region bounded by a closed curve. This category includes questions related to the formula for calculating the Area of a surface or how to determine the Area of a surface.

30,791 Questions

How much of an area can a nuclear explosion damage?

The area that a nuclear explosion can damage depends on the size of the bomb and the altitude at which it detonates. A large nuclear bomb detonated at ground level can create a blast radius of several miles, while detonating a smaller bomb at higher altitudes can generate an electromagnetic pulse that can affect a much larger area.

Formula for square miles into square yards?

To convert square miles to square yards, multiply the number of square miles by 3,097,600. (1 mile equals 1,760 yards, so 1 square mile = 1760 yards x 1760 yards = 3,097,600 square yards.) I WAS TOLD TO TAKE DISTANCE IN MILES AND MULTIPLY BY WIDTH OF ROAD AND DIVIDE BY NINE FOR EXAMPLE 3 MILES OF A ROAD 18 FEET WIDE WOULD BE 5280 X3 = 15840 X 18 = 285,120 THEN DIVIDE BY 9 = 31,680 SQ. YDS.

What is the land mass of Virginia?

peninsula,coast,plain,costal plain,fall line,waterfalls,hills,moutians,valleys,ridge and plateau

How many sections in 140 acres?

There are no specific number of sections in 140 acres, as it depends on the measurement unit used for each section. For example, if each section is 1 acre, then there would be 140 sections in 140 acres.

What is squarefeet?

Square feet is a unit of area measurement commonly used in real estate and construction. It represents the area of a square with each side measuring one foot in length. It is often used to measure the size of rooms, houses, or land.

How many cubic yards in 1 cubic ft?

There are 3 feet in a yard, which is equivalent to 3/1 feet in a yard if converted into fractional form.

However, the question not asking for the answer in terms of cubic feet per yard; it is actually asking the 'inverse' relationship, where we are dealing in yards, not feet. Therefore, as we want the inverse relationship, we must flip the fraction upsidedown, or INVERT the fraction to get the right relationship.

Thus, by inverting the fraction, there is 1/3 of a yard in every foot. But when dealing in cubics, we are dealing in 3 dimensions, not just the one. So, in every one of the 3 directions, we will be using 1/3 of a yard in our measurement.

Mathematically, therefore, we must multiply 1/3 with itself three times:

1/3 X 1/3 X 1/3 = 1/27

So there is 1/27 of a cubic yard in 1 cubic foot.

What wattage space heater will heat a 280 square foot room?

A good rule of thumb is to aim for 10 watts per square foot, so for a 280 square foot room, you would need a space heater with around 2800 watts to effectively heat the space. However, factors like insulation, room layout, and outside temperature can also affect the heater's efficiency.

How many square feet in 3.1 acres?

(3.5 acres) x (43,560 square feet per acre) = 152,460square feet

How many lots are in one acre?

This answer will vary by quite a large degree depending on the types of trees in the given acre, the local conditions and many other factors. However, if we are talking about an average value, then you could do worse than to use the US Department of Energy's value from "Sector-Specific Issues and Reporting Methodologies Supporting the General Guidelines for the Voluntary Reporting of Greenhouse Gases" under Sections 1605(b) of the Energy Policy Act of 1992 which puts average tree cover per acre as 700 (this assumes you are indeed talking about a forest as you didn't state exactly).

How many yards x yards is a acre?

There are 43,560 square feet in an acre.

There are 9 square feet in a square yard.

43,560 ÷ 9 = 4,840 square yards in an acre.

If you want a relatively square space, then the closest yardage would be:

69.57 yards x 69.57 yards = 4,840 square yards.

How big is a room that is 110 square feet?

Any size room where the length in feet times the width in feet equals 1,330.

What is kentuckys land mass?

The commonwealth of Kentucky is 40,409 square miles or 104,659 square kilometers in area. Within that landmass is 160,300 acres of surface water.

Is a square foot bigger than a square inch?

Yes, a square foot is 12 times bigger than a square inch. You use this same conversion as if it were not squared; an inch is smaller than a foot.

Difference between 9 cubic feet and 1.2 cubic feet?

The difference between 9 cubic feet and 1.2 cubic feet is 7.8 cubic feet. This means that 9 cubic feet is 7.8 cubic feet more than 1.2 cubic feet.

What is Iowa's land mass?

The state of Iowa is about 56,000 square miles. Iowa's land mass is mostly made up of flat ground. There are a lot of farms in this state.

Convert 2000 square feet to acres?

hi.....i am rajwant singh cpt student (ca).

i want to say about your question.

1 acres =4840 square yards

1 square yards = 9 square feet.

now,

200000 sqf =22222.222222 sq yards

22222.222222/4840=4.5913682277

that,s mean 4 acres , 2862 yards

Thanks and Regards

RAJWANT SINGH ---------e-mail---rajwant90@gmail.com

How many acres is one Hectarea?

One hectare is equal to approximately 2.47 acres.