answersLogoWhite

0

BMX Bicycles

Though BMX bikes were designed primarily for motocross and dirt cycling, their use has become a popular form of leisure entertainment for adults and children. Their frames are made of aluminum and steel. BMX stands for bicycle motocross.

500 Questions

Can you ride a bmx with a 12t cassette and a 25t sprocket?

User Avatar

Asked by Wiki User

yes, 28/9 gearing is very popular with riders. it provides a little more resistance than the even more popular 25/9. theres nothing wrong with that gearing at all.

What are some good all-around bmx bikes for 350 or less?

User Avatar

Asked by Wiki User

go to danscomp.com and check the weights on the bikes. it also depends on how strong you are and how much you weight

How much does a kink curb 2010 frame weigh?

User Avatar

Asked by Wiki User

Not too sure the actuall weight but its pretty light ;)

Where can I buy a used Skyway BMX?

User Avatar

Asked by Wiki User

A used Skyway BMX bike can be purchased from the original owners. Ebay and PinkBike are two locations where skyway bikes can be listed for resale. Used bikes can also be found on craigslist.

How do you fix stiff bottom brackets?

User Avatar

Asked by Wiki User

Way too many variations to answer here. Check out www.bicycletutor.com, www sheldonbrown.com or www.parktool.com for detailed instructions.

Where can one purchase BMX handlebars?

User Avatar

Asked by Wiki User

it depends on what the purpose for riding your fixie is...for tricks use a riser handlebar because it allows for the best leverage when doing wheelies or keospins. you should use straight bars when your just cruising

Should you buy a BMX or a Jump bike?

User Avatar

Asked by Wiki User

it matters what you are going to use it for

How do you solve squeaky brakes on a bike?

User Avatar

Asked by Wiki User

Brakes will squeak when the brake shoes vibrate on the rim of the wheel as they grab. As the rim rotates, it will twist the brake shoes so that only the back of the show touches the rim.

To fix this, you need to make sure your brakes have what's called "toe in". Essentially, the brake shoes should be angled in such a way to where the front of the brake shoe touches first. Then, as the rim and brake shoe meet, the brake will flex in and the shoes will grab flush into the rim and not squeak.

Can the axle of a bike be put in backwards?

User Avatar

Asked by Wiki User

ANSWER:For the front wheel on most bikes, it wont matter. On The one I had, the rear axle had a specific groove for where the sprocket went and the axle wasnt interchangeable. You knew right away if It was on backwards because the chain wouldn't go on the bike. For the newer bikes, I truly don't know.

How do you paint a bmx bike?

User Avatar

Asked by Wiki User

Well first you have to dismantle all the bike parts from the bike. Separate wheels from body and take out all the brakes and stickers. Then remove all the old paint and scratches from the bike. To remove the old paint, take a sheet of sand paper and rub it against the parts that you want to paint. Rub until you see a silver metal under the paint. After you have done that, you are ready to paint your bike. (For BEST results i prefer using spray paint for metal, because it sticks better to it.) Take a spray paint and spray the first coat. Than wait 5-10 minutes for paint to dry than spray the second layer. For more darker color, make it 3 layers. So here you go! Enjoy!

Is 33 pounds heavy for a bmx bike?

User Avatar

Asked by Wiki User

yes pretty heavy , an average bmx is around 22-27 lb :) Your really lucky my bike is 37 pound 1/3 of my weight :o

-No average is about 24.5 lbs im getting rid of my bike because it is 28 lbs and way to heavy. My brothers ugly cheap walmart bike is only a pound more than my bike. Get a fit bike or a we the people. No way you can really do anything on a 35 lb bike.

Can you sit down on a bmx?

User Avatar

Asked by Wiki User

Most will fit, but that's not the same as saying that most can be used. On a bmx you run a higher than average risk of sitting down heavily on the saddle, so you want one that can take the kind of abuse.

Do you need a bmx bike to do tricks?

User Avatar

Asked by Wiki User

the first trick i learned was the 360 tail whip you do that by going up a ramp and take your feet off the pedals and move your right foot over to the left and kick the seat around to the left then sit down hope it helps WARNING! dont do this trick if you cant do a wheelie!!!!!!!!!

hope this helps

Things wrong with this answer:

1) You would never be able to do a 360 whip for your first trick.

2) He said nothing about spinning (the 360 bit).

3) When you land a tailwhip you don't sit down.

4) You don't need to be able to wheelie, most good riders probably can't even wheelie 10 metres, its a chavvy 'trick' anyway.

you start off with a bunny hop. once you get a bunny hop down you start to apply it to things such as curbs. after this you will want to get a feel of moving in the air so try 180s once u get those move to 360s. after this you should try barspins. once you learned all of this you should have good control over your bike and move on to tailwhips. now you master these you can do combos, create your own tricks and move on to harder things.

What is light for a bmx bike?

User Avatar

Asked by Wiki User

17 pounds bec its dangerous for it to be too light

What bike is best suited a bmx or a montain bike?

User Avatar

Asked by Wiki User

It's more a question of being different than being better.

BMXes are great for short, hard rides with plenty of falls and crashes, they're simple and very robust.

Downside is that they're really inefficient and strenuous to use for longer rides.

MTBs are better for longer, faster rides, but they are bigger and tend to get more beat up in crashes and falls.

Where can you find pink flick trix bmx bikes?

User Avatar

Asked by Jimbob1234rewq

pink might be a hard color to find but try walmart and target in the tech deck section of the store

What is the best bmx bike brand?

User Avatar

Asked by Wiki User

You want to start off with a decent bike make like wethepeople, fit bikeco, kink. you want to look for a bike that isnt to light, but isnt to heavy.. street bikes usually have a small bit of weight to them... a stronger frame is a heavier frame... and if you were to do some of the crazy stuff that street bikers do a light frame would be gone in days. and most of the time it will say whether the bike is best suited for street park or for trails.

How much is the average BMX cost?

User Avatar

Asked by Wiki User

Depends on how good you want it, and how many you want to have made. On a department-store BMX, the frame probably cost something USD 5-10 to make.

A high-quality frame, made in a small number, may actually cost USD 1000 to make.

Are sapient bikes any good?

User Avatar

Asked by Wiki User

No, they are made out of hi-ten steel which is both weaker and heavier than chromoly. On top of that, the brand is one that is very unknown.

Why do bmx bikes have 1 brake?

User Avatar

Asked by Wiki User

First of all, not all of them have.

Rim brakes, which is the other option, have a few drawbacks. In rain, brake performance gets worse. If you ride in mud the brakes will eventually wear the rim away. If your wheel gets warped brakes won't work that well.

Using disc brakes, which sits in the center of the wheel gets you away from all that.

How much does mongoose mode 720 bmx bike weigh?

User Avatar

Asked by Wiki User

it is actually quite light i baught mine yesterday

I am 5'9 what size BMX do i need?

User Avatar

Asked by Wiki User

BMX bikes pretty much all have 20"wheels, which makes all frames very similar in size. On top of that BMX is almost entirely ridden standing up, so bike size doesn't matter as much as it does for road riding for instance.

I agree, but get at least a 20.5" frame.

Can you stick stickers on a bmx helmet?

User Avatar

Asked by Wiki User

If you like.

What size bars does a pro bmx bike usually use?

User Avatar

Asked by Wiki User

what ever size fits them for their intended uses.