Chevrolet

The GM part number 8970016 corresponds to a Chevy 350 engine that was produced between 1986 and 1995. To determine the exact year, you would need to check the engine block's casting date or any identifying serial numbers. Typically, the casting date will give you a more precise year of manufacture.

No, the crankshaft from a 366 Chevy engine will not fit a 396 Chevy engine. While both engines are part of the Chevrolet big block family, they have different specifications, including stroke length and journal sizes. The 396 typically has a longer stroke and different mounting characteristics, making them incompatible without significant modifications. Always consult specific engine documentation or a professional for precise compatibility details.

The fluid capacity of a 1991 Chevy 1500 4x4 with a 5-speed manual transmission is approximately 2.5 quarts (or about 2.4 liters) when using standard transmission fluid. It's essential to check the owner's manual or service guide for specific recommendations, as it may vary slightly based on the transmission type. Always ensure to use the correct type of fluid for optimal performance.

To install wiper cables on a 1957 Chevy, first, remove the wiper arms and the cowl panel to access the wiper motor and cable assembly. Attach the new wiper cables to the wiper motor, ensuring they are routed correctly according to the factory layout. Secure the cables to the wiper mechanism and reassemble the cowl panel and wiper arms. Finally, test the wipers to ensure they operate smoothly.

To change the front brakes on a 2004 Chevrolet Silverado, you will need a few essential tools: a jack and jack stands to lift and secure the vehicle, a lug wrench to remove the wheel, a socket set (including a 14mm or 15mm socket) to remove the brake caliper, and possibly a C-clamp or brake caliper tool to compress the caliper piston. Additionally, having a brake cleaner, new brake pads, and possibly new rotors on hand will ensure a complete brake job. Safety glasses and gloves are also recommended for protection.

To set the valve lash on a 1988 Chevy Cavalier with a 2.0-liter engine, first, ensure the engine is cold. Remove the valve cover and use a feeler gauge to measure the gap between the rocker arm and the valve stem. The specified clearance is typically 0.008 inches for both intake and exhaust valves; adjust by loosening the locking nut and turning the adjuster screw as needed. After achieving the correct clearance, re-tighten the locking nut and recheck the gap to ensure it remains within specifications.

The fuse for the alarm system in a 2006 Chevy HHR is typically located in the fuse box under the dashboard on the driver's side. You may also find relevant fuses in the engine compartment fuse box. To identify the specific fuse for the alarm system, refer to the owner's manual, which provides a diagram and description of each fuse. Always ensure to check the fuses when diagnosing alarm-related issues.

For a 2001 Chevy Monte Carlo, the transmission fluid capacity is approximately 11 to 12 quarts when performing a complete fluid change, including the torque converter. If you're only adding fluid or doing a partial change, consult your owner's manual, as the amount needed may vary based on the specific condition of the transmission. Always check the fluid level using the dipstick and add fluid gradually to avoid overfilling.

To replace the rear cup holder in a 2005 Equinox, start by removing the trim panel that surrounds the cup holder; this usually involves prying it off gently with a flat tool. Once the trim is off, unscrew any screws holding the cup holder in place and disconnect any wiring if applicable. Replace it with the new cup holder, secure it with screws, and reattach the trim panel. Finally, ensure everything is aligned properly and test the cup holder for proper function.

The fuse box on a 1989 Chevy S10 is typically located under the dashboard on the driver's side. You'll find it above the brake pedal, mounted on the side of the dashboard. In some models, there may also be a secondary fuse box under the hood near the battery. Always consult the vehicle's owner manual for precise locations and diagrams.

The fuse for the Chevy Cobalt trunk release button is typically located in the fuse box inside the vehicle. For most models, this fuse box is found on the driver's side, under the dashboard. You may need to consult the owner’s manual for the exact fuse diagram and number, as the specific location can vary by year and model.

In 1960, the base price of a Chevrolet Impala started around $2,500. However, depending on the model and optional features, the price could vary significantly, reaching up to about $3,000 for more fully equipped versions. This pricing reflected the Impala's position as a mid-range vehicle in Chevrolet's lineup during that era.

A 350 cubic inch (cid) Chevy engine typically weighs around 500 to 600 pounds, depending on the specific configuration and components used, such as the intake manifold, exhaust system, and whether it has accessories like an alternator or power steering pump. This weight can vary slightly between different versions of the engine, including those with aluminum versus cast iron components.

The vacuum line diagram for a 1993 Chevy G30 with a 5.7L 350 V8 typically includes connections for various components such as the brake booster, HVAC system, EGR valve, and carburetor. The diagram shows the routing of vacuum lines, indicating which components are connected and where vacuum sources are drawn from the engine. It's important to refer to a specific repair manual or service guide for accurate details tailored to your vehicle's configuration, as variations may exist based on equipment or emissions systems.

The fluid capacity for a 5-speed manual transmission in a 1997 Chevy S-10 is approximately 2.2 quarts (about 2.1 liters) when using the proper fluid type, typically GM Synchromesh or equivalent. It's important to check the owner's manual or service manual for specific recommendations and to ensure the transmission is filled to the correct level.

To remove the rear door panel of a 2012 Chevy Equinox, first, ensure the window is fully closed, then carefully pry off any plastic trim pieces and remove the screws hidden beneath them. Next, use a door panel removal tool or flathead screwdriver to gently detach the panel from the door by popping out the clips around the edges. Once unfastened, lift the panel upward to disengage it from the window ledge, and disconnect any electrical connectors before fully removing the panel.

To open the fuel door on a 2014 Chevy Cruze, first, ensure the vehicle is turned off. Locate the fuel door release lever inside the car, typically found on the driver’s side near the floor. Pull the lever, and the fuel door should pop open. If the lever does not work, you may need to manually push the fuel door to release it.

The season that begins on the vernal equinox is spring. This event typically occurs around March 20th or 21st in the Northern Hemisphere, marking the point when day and night are approximately equal in length. The arrival of spring is often associated with warmer temperatures and the blossoming of flowers and trees.

The Chevy Tahoe is primarily available with a rear-wheel drive (RWD) configuration, but it also offers an all-wheel drive (AWD) option. The RWD version provides better fuel efficiency and handling for highway driving, while the AWD option enhances traction in adverse weather conditions. Depending on the model year and trim, buyers can choose the drivetrain that best suits their needs.

To program a keyless remote for a 2003 Chevy Express van, first, insert the key into the ignition and turn it to the "On" position without starting the engine. Press and hold the "Lock" and "Unlock" buttons on the remote simultaneously for about 15 seconds until the vehicle's locks cycle, indicating the remote is in programming mode. Release the buttons, then press the "Lock" button on the remote to finalize the programming. Repeat the process for any additional remotes.

The 1969 Chevy C10 pickup shares many interchangeable parts with the 1967 and 1968 models, particularly in body panels, trim, and mechanical components. Additionally, some parts from the 1970 C10 may also fit, especially in terms of engine and suspension components. However, it's essential to verify specific part compatibility, as variations can occur based on production changes and options. Always consult a parts catalog or specialist for precise interchangeability.

No, a 2016 Chevy Traverse cannot be flat towed. The manufacturer does not recommend flat towing due to potential damage to the drivetrain. If you need to tow the vehicle, consider using a trailer or a tow dolly to safely transport it. Always refer to the owner's manual for specific towing guidelines and recommendations.

To calculate net weight from gross weight, you need to subtract the tare weight from the gross weight. The gross weight is the total weight of the item, including its packaging and any containers, while the tare weight is the weight of the packaging or container alone. The formula is: Net Weight = Gross Weight - Tare Weight. This will give you the weight of the product without any packaging.

To differentiate between a Chevy 235 and a 250 engine, you can check the engine block casting numbers and the size of the intake and exhaust manifolds. The 235 is a 3.9-liter inline-six engine, while the 250 is a 4.1-liter engine, so the 250 will be slightly taller and wider. Additionally, the 250 often has a larger oil pan and may feature a different carburetor setup compared to the 235. Check for the presence of a factory stamped engine ID number, which can also help identify the engine model.

In a 2004 Chevy Tahoe, the window control fuse box is located under the dashboard on the driver's side. To access it, you may need to remove a cover or panel. The specific fuse for the window controls can be found in the fuse diagram located on the cover or in the owner’s manual. Always ensure the vehicle is off before checking or replacing fuses.