0
Engineering
Engineering is an art and profession devoted to designing, constructing, and operating the structures, machines, and other devices of industry and everyday life.
5,839 Questions
Who decides how big a gear should be a scientist a engineer or a technologist?
The engineer that designs the gearbox. The sizes of the bull gear and pinion gear(s), as well as any idler gear(s) are dependent upon the sizes of the drive and driven shafts and the torque that will be applied to each, as well as the ratio of gear reduction, and speed of rotation.
Opportunities after a diploma in engineering?
Below are the opportunities after Diploma in engineering.
1) B.E/B.Tech
2) IEEE/IETE examinations.
3) AMIE (Graduation from institute of engineering) Equ. to B.E degree
4) Some colleges offered PG in Business after diploma with 3 yrs of work exp. i.e Symbiosis
What is the difference between low voltage release and low voltage protction?
After a power failure, a device with low voltage protection will not restart automatically after power is restored to normal. This normally means that the breaker must be reset. A device with low voltage release automatically starts when power is returned to normal.
Advantages and disadvantages of suspension bridges?
It is good that they are flexible, however when very bad weather happens it can be bad. They are also bad for heavy loads. Two advantages are that they can be built high and they do not require a lot of material to be built.
Describe at least six items of data that might be recorded in a station model?
1) Temperature
2)Dew point
3)Wind speed
4)Air pressure
5)Fog
6)Precipitation
There you go
300 millimeters = 11.8110236 inches
Bashar
Direct Conversion Formula300 mm*
1 in
25.4 mm
=
11.81102362 in
300 mm = 11.811 inches
What is the Schematic symbol for pressure sensor?
unfortunately i only know the HYDRAULIC symbol for pressure GAUGE. I hope that helps. Anyways, its basically a circle, with a line sticking out the bottom. Looks like a lolly-pop.
Inside the circle is an arrow, pointing either upwards to the right, or upwards to the left. But not straight up (confusing since this is similar to the symbol for hydraulic pump!)
There is a site called FESTO, which has a list of electrical, pneumatic and logic symbols.
hope this helps!
What is wastewater engineering?
This is a course offered where a person undergoes wastewater training for designing and managing wastewater treatment and disposal.
On a more detailed manner, he is responsible for the design (engineering) of a system to capture and treat wastewater, whether it is runoff, sewage, etc., so the final product is reuseable or redirected.
What is instrumentation technology engineering?
Instrumentation technology is the engineering specialization focused on the principle and operation of measuring instruments that are used in design and configuration of automated systems in electrical, pneumatic domains etc. They typically work for industries with automated processes, such as chemical or manufacturing plants, with the goal of improving system productivity, reliability, safety, optimization, and stability. To control the parameters in a process or in a particular system, devices such as microprocessors, microcontrollers or PLCs are used, but their ultimate aim is to control the parameters of a system.
A flange is a protruding flat rib, a collar, and a rim shape of a round object that is used to strengthen, to attain, or to maintain position on the rail.
How much does it cost to send a spaceship to the moon?
To send a spaceship to the moon it costs around 1.7 billion dollars. That includes the building of the rocket, plus take off fuel, etc.
What does an engineering company do?
They build as per the requirment and make a test whether it can with stand all the effects....
Is there an interesting fact about engineering?
There are many, to see some of them see the link below this answer in the 'Related Links' section, or go to http://www.rfcafe.com/miscellany/humor/engineering_trivia.htm .
What do you do for black tongue?
i heard eat pineapples but im going through the same thing right now.i just got my tongue pierced about 2 weeks ago and my tongue was looking weird and i went to the er.he said my tongue looked fine and gave me penicillin to take 4 times a day and one of the side affects was black tongue.im not gonna lie i didint want to take it.been taking it for about 4 days now and my tongue is starting to look wierd.ive been brushing my tongue like crazy.its not black but its like white looks weird.i need help too.some one help us:( ty
How do you remove the seat on a 1985 Yamaha Virago 750 bike?
I have a 1985 Yamaha Virago XV700, I'm sure it's the same procedure.. 1. Remove both side covers by gently pulling them off. 2. On the left side of bike, where the cover was, in the upper left corner, there is a bolt you remove that also hold the plastic tool box on. Caution when removing this bolt as there is a spacer (approx 1" long) between the tool box and the seat mount tab (frame threaded hole is behind the seat tab). Personally, I remove the tool box completely first (by removing a second bolt in the upper right corner of the tool box), then remove the spacer. 3. On the right side of bike where the side panel was, in the upper right corner there is just a bolt to remove. 4. Once bolts on both sides have been removed, pull up at the front of the seat, shove it forward to release the tab fron the fender slot, and remove seat. 5. Reverse above process to install, insuring you have the rear tab in the fender slot before bolting everything back together, and putting on the side covers.
What is petrochemical engineering is all about?
I came across petrochemical engineering in my study and would want to know what it is
Why do engineers specializing in one field need to have some understanding of the other branches?
Because most engineering fields relates to each other.
eBIZ is a platform from where one person can change his life in every aspect. Actually it provides an on-line computer course. But this is not the end. It provides you to start a home base business. for any other information visit this site www.ebizelindia.com
Difference between truing and dressing of grinding wheel?
