Fireplaces

flexible corrugated metal connectors sometimes cause a whistle sound when gas pressure feeds through the orfice at the venturi, also 11 inch wc propane pressure will sometimes whistle with higher input burners.

The three factors needed for burning are fuel, oxygen, and heat. Fuel provides the substance to burn, oxygen is required for the combustion process, and heat initiates and sustains the chemical reaction. Missing any of these factors will prevent burning from occurring.

Creosote from a chimney should not be used as a preservative. Creosote is a toxic substance that contains chemicals harmful to humans and the environment. It is not approved for use as a preservative for wood or other materials. It is important to dispose of creosote properly to prevent contamination.

Put on a pair of safety glasses or goggles (you ARE going to get stuff in your face) get a good flashlight, and get a look at the damper. Most are hinged, and will swing UP the chimney. Most have a bracket and support the holds it open or closed. With the light to help you see, move the support so that it is free of the bracket, and try to swing it open (up). If it does not move, you may have foreign material in the chimney (especially if your chimney does not have a cap). If that is the case, you need the services of a chimney sweep.

The first step is to clean the fan thoroughly to remove any debris or dust that may be causing the noise. If cleaning doesn't resolve the issue, check if the fan blades are properly aligned and not loose. If the noise persists, it may be a sign of a worn-out motor that needs to be replaced.

Smoke blowing into a house instead of out of the chimney can be due to improper ventilation or draft issues. This can be caused by a cold chimney, air pressure differentials, or obstructions like debris or animal nests blocking the chimney. It is important to address these issues promptly to prevent smoke from entering the living space.

Yes, you can burn Sugar Gum wood in a fireplace. It is a dense hardwood with good heat output and long-lasting burn times, making it suitable for heating. Make sure the wood is seasoned properly to prevent excessive smoke and creosote buildup in the chimney.

Mica is the thin and flexible mineral that was once commonly used for windows in wood stoves. It is a transparent mineral with a layered structure that allows light to pass through easily while providing heat resistance and durability.

With respect to gas fireplaces, these types of fireplaces typically do little to heat a room without having a blower kit installed. A blower kit will draw cool air in from the lower louver and expell the heated air out the top louver. The physics of convection still apply with any fireplace. The cooler dense air forces the lighter heated air up. A common ceiling fan can certainly help with this process.

Both burning a log in a fireplace and burning gasoline in a car are examples of exothermic reactions. These reactions release energy in the form of heat and light as they occur. The heat and light produced during the combustion process are key to generating the energy needed to heat a room or propel a vehicle.

Burning produces smoke (carbon) and gasses, such as Carbon Dioxide and Carbon Monoxide, along with water vapor. Ash is left after the wood is burned. We use our wood ash as fertilizer in our garden, for our grapevines, etc.

When a log burns in a fireplace, the matter in the log undergoes a chemical reaction called combustion. The heat from the fire breaks down the chemical bonds in the wood, releasing energy in the form of heat and light. The carbon in the wood combines with oxygen in the air to form carbon dioxide and other byproducts like water vapor and ash.

Something is preventing your fireplace from drawing. The damper may be closed, or partially closed. Your chimney may have a blockage, or you may have prevailing winds that push smoke back down the chimney. If you have air flow problems, such as a vent fan that draws air out of the house, it can cause that. Bottom line- if the damper is open, and the flue is not blocked, you need a good fireplace/chimney specialist to examine what you have.

A gas clothes dryer emits carbon dioxide (CO2) as a byproduct of the combustion process that generates heat for drying clothes. It is important to ensure proper ventilation when using a gas dryer to prevent indoor air pollution.

Gas fireplaces typically receive gas from a direct gas line connection in the home. The gas line provides a continuous flow of gas to the fireplace, allowing it to ignite and create flames. The gas flow can be controlled and regulated using a valve or switch on the fireplace.

The energy conversion that occurs is from thermal energy (heat) produced by the fireplace to thermal energy absorbed by your feet, increasing their temperature.

Wood catches on fire when it reaches its ignition temperature, typically around 300°C (570°F), causing the wood to release flammable gases. These gases mix with oxygen in the air, creating a combustible mixture that ignites. Once ignited, the wood continues to burn as long as there is a continuous supply of oxygen, heat, and fuel.

A gas smell when a gas fireplace is turned off may indicate a gas leak, incomplete combustion, or a problem with the gas line or burner. It is important to have a professional inspect and repair the fireplace to ensure safety and proper functioning.

Yes, wood density does affect the burning time. Denser woods typically burn slower and longer than less dense woods because they have a higher energy content and slower combustion rate. Softer woods with lower density tend to burn faster and produce less heat.

Seasoned (dried) oak weights about 4000 lbs. or two (2) tons.

A cord is defined as 128 cubic feet (3.62 m3), corresponding to a woodpile four (4) feet (122 cm) wide, four (4) feet (1.2 m) high and eight (8) feet (244 cm) long. So the weight would depend on the type of wood.

a cord of wood is the amount of wood in a stack of 48-inch logs (or cut logs equaling 48 inches) that is 4 feet high and 8 feet wide

The Orsat apparatus is used to analyze the composition of flue gases, typically measuring oxygen, carbon dioxide, and carbon monoxide levels. The apparatus involves passing a known volume of flue gas through different chemical solutions to absorb specific gases, allowing for quantification of each component. This analysis helps assess combustion efficiency and environmental impact of fuel-burning processes.

Hardwoods such as oak, maple, ash, and hickory are typically good at burning because they are dense and provide a longer burn time and more heat output. Softwoods like pine and spruce can also be good for starting fires due to their quick ignition, but tend to burn faster and produce more creosote buildup.

In the USA, at 110 volts, 1500 watts just about uses all the capacity of a 15 amp breaker, there's only 150 watts spare, look at the rating of the lamp and fan - lamp may be 40, 60, 100 watts, fan 40, 60, more? In the UK and Europe, at 230 volts, there's no problem. I give both answers because I don't know where you are.

When wood is burned, the carbon in the wood combines with oxygen in the air to form carbon dioxide, leaving behind black carbon residue known as charcoal. This is why the wood turns black when burned.