0
Flooring
Floors can be a challenge to install, maintain and change. Questions regarding the installation, maintenance and repair of carpets, tile, wood and other materials go here.
6,242 Questions
What can you deep clean your hardwood floor with?
There are a vast arrays of cleaners on the market, most DIY stores carry them. Without knowing what finish you have on the floor means we cannot give you definative replies however,;
- Choose a cleaner that is compatible with your type of wood finish. Picking the wrong kind of cleaner can leave your floor looking dull and dingy instead of shiny and clean.
- If you've got a polyurethane finish on your parquet floor, pick a cleaner made for finished wood floors-without a wax component.
- If you've got an older wood floor with a varnish or other finish, you can use an oil based product that will work with your finish.
- Using a soft cloth or a mop, clean the floor. Take special care with especially soiled areas.
- Even if you normally choose to mop the floor, you may want to get down on your hands and knees for the deepest clean between the tiles.
- After mopping, be sure to dry the floor and not let water sit on the surface. If water gets under the tiles, it can loosen the floor or expand the wood which leads to ugly cracks.
- Drying the wood floor will stop water spots from forming as the water evaporates from the wood surface.
If the floor is really badly stained and marked it is sometimes better to hire in a floor sander and take off the surface back to the wood. This is ONLY as a final resort as you will then have to do every part of the fllor right to the edges and then clean off all debris and then start with a sealer, stainif needed, then a number of coats of a very good poly finish - you can wax it but this can take considerable times to dry and makes use difficult as its slippery
Hardwood is valued for its durability, strength, and aesthetic appeal, making it an ideal choice for furniture, flooring, and cabinetry. Its natural beauty and variety of grain patterns enhance interior design, adding warmth and elegance to spaces. Additionally, hardwood is more resistant to wear and tear compared to softwoods, ensuring a longer lifespan for products made from it. Lastly, hardwood can be a sustainable choice when sourced responsibly, contributing to environmental conservation.
What kind of carpet padding for basements?
You don't put padding directly on a concrete floor. You have to frame out the floor, lay plywood sheets over the frame, probably want a vapor barrier as well. Then you can lay any pad and carpet you want. There are certain types of carpet that come with an attached foam padding that are designed to lay over concrete. If you think you want to just glue carpet directly to the concrete floor, check the mfg. warranty first. Most mfgs. will not honor their warranty unless they specifically state that it can be glued to concrete.
Can DOW blue board be used under concrete floors?
Yes, DOW blue board, which refers to extruded polystyrene insulation, can be used under concrete floors. It provides thermal insulation and can help prevent heat loss, making it suitable for use in slab-on-grade construction. However, it’s essential to ensure proper installation and consider any local building codes or requirements for insulation in flooring applications.
Can the bathroom floor tiles color be change and how?
Not really. It's really hard to Paint over tiles with a good and lasting result.
How can you flatten an area of raised laminate floor?
It may have raised because insufficient expansion area was left around the perimeter when installed. Remove a baseboard and check to see if at least a 1/4" gap exists between the flooring and the wall. If the flooring is touching the wall, it will need to be trimmed down to allow for the expansion of the material. This may involving cutting the material in place, a messy job that should include a shop vac to suck up the dust when cutting.
How do you disolve thinset under tiles?
There is no way to dissolve it. It must be physically scraped off.
How do you use acetone to get wax off of your apartment ceramic floor?
Acetone is likely to damage the finish of your ceramic. It would be better to use an old credit card to scrape up as much of the wax as you can. When there is not much left, use a hair dryer to warm the wax. Press a dry paper towel onto the spot to soak up the melted wax. If there is any left, you can use a toothbrush and a little bit of cleaner to get the rest up.
How can you waterproof a spancrete garage floor?
To waterproof a spancrete garage floor, start by cleaning the surface thoroughly to remove any dirt, oil, or debris. Next, apply a high-quality concrete waterproofing sealant or membrane specifically designed for floors, following the manufacturer's instructions for application. It's crucial to ensure that any cracks or joints are properly filled before sealing to prevent water infiltration. Finally, consider installing a drainage system or slope the floor slightly to direct water away from the garage.
Is it ok to use wall tiles on floors?
If you will use it inside the house then it's ok, but if you will use it inside the bathroom it is not advisable because wall tiles are slippery when wet. Slippery floroing is not good in the bathroom. It can cause accidents.
Simpley put - NO. wall tiles are frequently thinner than flooring tiles and have a surface designed to allow water to stay on the surface. Floor tiles have a degree of grip to prevent slipping. GOOD Trades people will not put these down on floors
How do you install ceramic tile over ceramic tile?
It is best to remove the vinyl tile. If it is not on cement and is on wood you can install cement backer board. Be sure to put thin set under the board. If you spend the money and time to install ceramic tile and the vinyl tile comes loose all that $ is down the drain
What is the best tile cement to use and this cement tile can be installed on vinyl tile and install ceramic tile on it
Where can you purchase 9 inch vinyl floor tiles?
It seems to have been discontinued...and if you pull it up, BE CAREFUL! The majority of nine-inch floor tile contains asbestos, and so does the glue it was installed with.
Can use use wall tiles on the floor?
Generally no. Wall tile are often made of material with low PSI ratings. These ratings tell how much pressure per square inch a flooring can with stand. Being made to go on the wall, they only need to be of marginal strength. This isn't always true, but that said, 95% of the time, wall tile cannot be put on the floor.
Not reccommended. It typically wont handle the traffic, and will end up cracking on you
Not really as wall tiles are usually highly glazed and would be VERY slippy if they get wet, there also usually a different clay background and not designed to be stood on. Hope this helps
How do you remove Biro stain from floor vinyl?
The best method is Cif or similar mildly abrasive cream cleaner. Pour a little over the stain and with a tissue gently rub over the blotch. It may take a little bit of work, but it should come off. If there are tiny traces left over, use a few drops of nail varnish remover. But wipe away with water quickly. The acetone in the remover, if left on, may blister the vinyl.
Can you put ceramic tile over Luann?
You have to put a cement board like Hardibacker, Wonderboard or Durock over the ceramic tile.
Can you install a penny floor over ceramic tile?
Yes, you can install a penny floor over ceramic tile, but it's important to ensure that the tile surface is clean, smooth, and free of any cracks or imperfections. Proper preparation, including cleaning and possibly leveling the surface, is essential for a successful installation. Additionally, using an appropriate adhesive designed for both the penny tiles and the existing ceramic is crucial for durability. Always check for moisture issues before proceeding with the installation.
What is the best vacume for cleaning hardwood floors?
One of the best vacuums for hardwood floors is the Hoover Linx.
480
<><><>
Depends. Do you mean 2 sq ft per tile, or each tile 2 ft x 2ft (which is 4 sq ft per tile)???
2 sq ft per tile is 480, but using 2x2 tiles would need half that- 240.
How many 11x11 floor squares package of 10 are needed for 9x20 dance floor?
Assuming that the floor squares are 11" x 11" and the dance floor is 9ft x 20ft, we can proceed as follows. 9ft = 108 inches and 20 ft = 240 inches. The product of the two which is the ares of the dance floor is 25920 square inches. Divide this by (11 x 11 = 121) to get 25920/121 = 214.214 squares. Since each package has 10 squares you would need 21.4214 packages. Since the shop keeper will not sell you fraction of a package plan on getting 22 packages.
Price per sq ft to lay tile in alberta?
The per square foot to lay tile in Alberta depends upon the type of tiled being installed.
What is the average labor cost for quarry tile installation in New York?
As of my last update, the average labor cost for quarry tile installation in New York typically ranges from $4 to $8 per square foot. This cost can vary based on factors such as the complexity of the installation, the contractor's experience, and regional differences within the state. Additional costs for materials and preparation may also apply, potentially increasing the overall expense. It's advisable to obtain multiple quotes for a more precise estimate.
How many packs of laminate flooring will you need for a 32ft x18ft room?
how many sq. ft. of material is in the pack your interested in?...multiply rooms width x length to get total sq. ft. needed to do room, then look at sq. ft on product per box and divide
What is the compound of a floor wax?
The compound of a floor wax typically includes a mixture of synthetic polymers, resins, and solvents. These ingredients provide the floor wax with its protective and shine-enhancing properties.
How do you remove ceramic tile glue residue from tile after installing ceramic tile floors?
It depends on the type of ceramic adhesive. Many of them can be taken off tile with lacquer thinner on a rag.
