Flooring

Apart from being extremely effective at cleaning hardwood floors, some of the other good qualities of the Bona hardwood floor cleaner are that it is environmentally friendly and has a non-toxic formula.

One tile of 6 ft x 24 ft will cover 144 sq feet and so should be sufficient.

If you did not mean 6 feet x 24 feet you should have specified the measurement units that you had in mind.

No. Laminate flooring is made of the same materials as laminate countertops - a type of plastic. Even though the flooring looks like wood, remember it is NOT. Polyurethane applied to laminate will only bubble and flake off.

dfdgdfdfd

20x 16 is 320 sq ft which is 320/9 = 36 sq yds

Cost is 17.00 x 36 = 612 dollars ( not including labor and waste).

It really makes no difference, except that some form of underlayment or backing is necessary to a successful installation. The existence of a backing already applied to the laminate makes no difference as to the quality of the flooring. But floors installed with no backing or foam or felt underlayment are prone to cracking and splitting, and are very noisy underfoot.

To resurface a concrete shower floor, start by thoroughly cleaning the surface to remove dirt, soap scum, and any existing sealants. Next, repair any cracks or damage with a concrete patching compound, then allow it to cure as per the manufacturer's instructions. Afterward, mix a concrete resurfacer according to the instructions and apply it evenly using a squeegee or trowel, ensuring a smooth finish. Finally, let the resurfacer cure completely before using the shower, and consider applying a sealer to protect the new surface.

NO. -Goof off will not damage finished hardwood floors or modern auto paint. I have carried out numerous experiments with Goof Off and found it to be extremely reliable for getting all kinds of recently applied paints and glues off many surfaces without damaging the hardened surfaces.

The materials will cost about $1.60 to $3.67 per square foot. If hiring a professional to do the labor, the cost obviously depends on the professional's rate, but a rough estimate would be $3 per square foot.

The bed skirt should be approximately one inch from the floor. If it is more than one inch from the floor, then any contents hidden under the bed will become visible. Leaving approximately one inch from the floor allows the space under the bed to benefit from air circulation.

Hard surface floor steamers have become an increasingly popular type of consumer cleaning product. They are advertised as being safe for all floor types; however, most manufacturers give explicit instructions on how to best safely use the steamers on hardwood and laminate hardwood floors.

Rubber floor tiles. They're easy to install, extremely durable, nonslip, and soft enough that if a child trips and falls they won't get hurt.

15 x 10 = 150 square yards

To determine the total number of gray tiles in the 100th floor design, we would need specific information about the pattern or arrangement of tiles used in each floor. If the design follows a mathematical sequence or formula, that would also be crucial to calculate the total number of gray tiles accurately. Without this data, it's impossible to provide a precise answer.

Cork tiles can definitely be recycled, as can any type of cork. Recycled cork tile is readily available at any good flooring distributor and can also be found at stores such as Home Depot and Lowe's.

Using a good sealer on a tile floor will protect the tiles as well as help make the floor easier to clean. Sealers are easy to apply with a mop to a dry, clean floor.

One would need to use floor liners when installing new floors to prevent dirt, snow, sand and many other unwanted debris to deform sink under the floor and deform it.

Bruce Flooring products are sold by the office store of Bruce Flooring, Home Depot and Armstrong. Other great places to buy Bruce Flooring products are Lowe's, Absolute Flooring and True Hard Woods.

Murphy's Oil is a popular brand of hardwood floor cleaner and moisturizer. Pledge is another very popular brand that offers products for floors. A good, cheap, easy to find brand is Palmolive.

If your old ceramic tile isn't cracking, loose or otherwise breaking apart then yes you can lay new tile over old. I wouldn't sand it with sand paper because I don't believe that sand paper will do enough scarcifying to the tile. get a right angle grinder, put a diamond blade used for tile on it and run it across the top of the tile. you don't need to take the whole surface off just have a few tracks running across each tile. Then you will need a more high performance thinset. whenever I have done this in for a client I use Laticrete 254 platinum or you can use a bonding agent. This is a roll on liquid that bonds to the existing tile and is a good substrate for the thinset you'll be using. You might have to go to a store that specializes in Tile to get these items. just as the sales rep there and they will point you in the right direction. hope this helps, good luck!

No it is not recommended to do so. You can have future problems if the wood ever builds up enough moisture underneath, which will cause it to expand and bubble up. Best thing to do is do it over a concrete surface, especially if it is glue. You can watch this video tutorial that gives pretty thorough instructions on how to install it. Go on youtube and type after com /watch?v=rxAsvy6g13k

Hope this helped.

Altro floors are offered in any color possible if you provide a sample of the color you would like. However textures like hardwood or custom designs are not possible to get.

Wood stain MUST penetrate the grain of the wood or it doesn't color. clear coats like Varnish or Urethaneare designed to seal over the stain "color" & keep the wood from being "stained" by all the dirt & spills it endures over time.

If you don't sand the old finish off evenly it will keep the new stain from penetrating and it will also allow the stain to penetrate in areas where the old varnish was worn or damaged but not in others making the new stain blotchy & uneven.

A good quality urethane is far better and easier to apply than Varnish.

.

440 sq feet = 440 x 144 sq inchesanswer = 440 x 144/ (20 x 20)

= 440 x 144 /400

= 1.1 x 144

= 158.4 tiles ~ 159 tiles