Flooring

nothing to be gained from removing it unless you know of some present contamination.

Years ago there was Formaldehyde on Particle board, but its gone now & in an old floor it would have disipated long ago..

If you fear it just seal the floor by rolling a coat of Deft or some paint

The average heating bill per month can vary significantly based on factors such as location, size of the living space, type of heating system, and energy prices. In the United States, the average heating bill during colder months can range from $50 to $200 or more, with some homes spending upwards of $300 or $400 in extreme climates. It's best to check with local utility providers or discuss with neighbors to get a better idea of what to expect.

The force that makes it harder to drag a chair over carpet than over a smooth concrete floor is friction. Friction is the resistance that occurs when two surfaces move against each other. The rough texture of the carpet creates more friction compared to the smooth surface of the concrete floor, making it more difficult to drag the chair.

The reason a concrete floor feels colder than a carpeted floor is because the carpet acts as an insulator to trap heat. The concrete on the other hand will stay cold way longer once it is cold.

Hardwoods came from hardwood or angiosperm trees. They are usually classified as hardwoods because of their physical structure and make up. They are commonly denser and more expensive than others like softwoods.One good example of hardwood is the oak beam which is very useful to different industries.

If it is the adhesive that the floor was installed with, try a quick squirt of WD-40 let sit for 10 minutes and rub gently with soft cloth, if that removes or reduces it keep it up till its all gone.

Wood finishes are for the most part Urethane these days, so paint thinner, Lacquer thinner or even oily nail polish remover might hurt the finish.

On a personal note, if the installer left the residue, make them come back & remove it, they have a product that will reduce or remove with them if they are pro's.

The carpet abd furniture absorb the sound,making it quieter.

NO. keep water & moisture away from your floor.

Your laminate doesn't need water. There are a lot of new & old Laminate floors out there and many differing claims as to how water resistant they are over time.

Either way, the surface of laminate is nothing more nor less that your mothers Formica counter-top, on a fiberboard substrate.

A Swiffer is the best thing going for laminate because there is almost no water to make your life complicated.

Our other home remedy has been a bottle of Windex sprayed at shoulder level and let it settle sparsly on the floor, then dry mop it up.

There is no need nor reason to ever put flowing water or use any mop with enough water to drip on a laminate floor. Its plastic & wipes clean with a moist cloth.

To clean perfume off tile floors, mix warm water with mild dish soap. Use a soft sponge or cloth to gently scrub the affected area. Rinse the floor with clean water and dry it thoroughly to prevent any damage to the tile.

Yes... Linoleum is durable, hygienic, pleasantly looking material with low-heat conductivity. It is water and moisture resistant, sound-proof and easy to cut and bend.

Yes, you can darken previously stained wooden floors by sanding down the existing finish, applying a darker stain, and then sealing the floors with a compatible top coat. It's important to follow the manufacturer's instructions for proper application and drying times.

Yes, you can use a solution of water and white vinegar to remove haze on polished porcelain tile. Mix equal parts vinegar and water, apply to the tile, scrub gently, and then rinse off with clean water. Be sure to test a small, inconspicuous area first to ensure it doesn't damage the tile.

If it is carpet, soak up all the liquid and then use a cleaner like Folex available at Home Depot to clean any stain. If it is vinyl or laminate, use a sponge mop and vinegar and water. You don't want to put a large amount of water on the floor, so squeeze out a must of it as you can. Then mop the floor. This should break up all the sticky feel. If it is hardwood, you will want to use a alcohol based cleaner like Bruce Duralust cleaner. It works great on sticky messes.

To remove a brick floor, you'll need to first remove any grout or mortar between the bricks using a chisel and hammer. Then, carefully pry up each brick using a pry bar or similar tool. Finally, clean up any remaining debris and level the surface for the new flooring.

Using bleach on pet urine on hardwood floors can damage the flooring by stripping the finish and discoloring the wood. Additionally, bleach can release harmful fumes that can be toxic to pets and humans. It's recommended to use enzymatic cleaners specifically designed for pet urine to effectively remove the odor and stains without causing damage.

A square foot is a measurement of area. A metre is a measurement of length.

There are roughly 10.76 square feet in one square metre, but a square metre is not the same as a metre.

Be careful with this one. If it is thin-laminate wood flooring, you should NOT remove the coating. Check with someone first. If its solid wood, get a decent brand of liquid stripper from the hardware store, follow all instructions and you should do just fine.

Very few if any home solvents will harm ceramic tile. 90% isopropyl alcohol will not harm ceramic tile, but this one for example, is very flammable and a spark and ignite it. Care should be taken to protect the surrounding finishes that will be harmed by the solvent in use.

To remove stickiness from ceramic floors caused by spray air fresheners, you can try mixing warm water with mild dish soap and gently scrubbing the affected area with a soft cloth or sponge. Alternatively, you can use a mixture of equal parts vinegar and water to clean the sticky residue. Make sure to rinse the area thoroughly with clean water after cleaning.

Yes, turpentine can potentially damage ceramic tile floors if left on the surface for an extended period of time. It's important to promptly clean up any spills and avoid using harsh chemicals on ceramic tiles to maintain their appearance and integrity.

To remove liquid soap from a tile floor, you can first soak up excess soap with paper towels or a clean cloth. Then, mix a solution of warm water and vinegar or dish soap and water, and use a mop or sponge to clean the area. Rinse the floor thoroughly with clean water and dry it with a towel to prevent streaking.

First try white vinegar and water. If that doesn't work, go to a commercial cleaning supplier. There are products used in public restrooms that remove urine odor from tile. Once you remove the smell, seal the tile grout well. This should keep it from holding an odor.

Marble flooring feels cool to touch because marble is a natural stone that has a high thermal conductivity, meaning it can absorb and dissipate heat quickly. This property allows marble to feel cold when compared to the surrounding air or other materials, providing a refreshing sensation when touched.

You can use common all-around cleaning products, such as Formula 409 spray solution, and other cleaning products. Then, just scrub with a paper towel, and the smell should be gone in the area after using a fan to blow away the smell from the 409 spray. This only works if the human urine has been there for a couple days or less, because usually any longer would mean that the urine is stained into the flooring, and needs a much stronger cleaning product.