0
Ford Trucks and SUVs
Trucks and SUVs are among the extensive product lines manufactured by the American automaker Ford Motor Company. Some of the models that belong to these product lines are the Ford Escape, the F-650, the Ford Transit and the Ford Cargo.
2,071 Questions
Turn signal on a 1984 ford f250 pickup does not work?
If the turn signals on your 1984 Ford F250 pickup are not working, first check the bulbs to ensure they are not burned out. Next, inspect the fuses related to the turn signal system in the fuse box. Additionally, examine the turn signal switch on the steering column, as it may be faulty or have loose connections. If these components are functioning properly, the issue could be related to wiring or the flasher relay.
What year did the Ford Explorer change its body type?
The Ford Explorer changed its body type in 2011 when it transitioned from a traditional truck-based SUV to a unibody crossover design. This marked a significant shift in its construction and target market, focusing more on passenger comfort and fuel efficiency. The change was part of Ford's broader strategy to adapt to evolving consumer preferences in the SUV segment.
Heater and AC on ford f150 doesn't work Blower does come on?
Most likely a blend door issue. Check heatertreater.net for pictures and diagnostic information.
How do you change a transmission in a 2000 Ford F-250 super duty?
To change the transmission in a 2000 Ford F-250 Super Duty, first, ensure the vehicle is securely lifted and supported on jack stands. Remove the drive shaft, disconnect the transmission cooler lines, and unbolt the transmission from the engine and crossmember. Carefully lower the transmission using a transmission jack, then install the new transmission by reversing the removal steps, making sure to connect all lines and electrical components properly. Finally, fill the transmission with the appropriate fluid and check for leaks before taking the vehicle for a test drive.
Where is the fuse located for cruise control on a 2002 Ford f-150?
In a 2002 Ford F-150, the fuse for the cruise control system is located in the fuse box under the dashboard on the driver's side. Specifically, it is often found in position 10 or 12 of the fuse panel, depending on the specific configuration. To check or replace the fuse, you can refer to the diagram on the fuse box cover for precise identification. Always make sure to use the correct amperage replacement fuse.
Where is the taillight fuse located on Ford F-150?
The taillight fuse on a Ford F-150 is typically located in the fuse box under the dashboard on the driver's side. You may also find additional fuses in the engine compartment fuse box. To identify the specific fuse for the taillights, refer to the fuse diagram in the owner's manual or on the fuse box cover. Always ensure the vehicle is turned off before inspecting or replacing fuses.
What is maximum timing advance on 1997 5.7 Tahoe?
The maximum timing advance for a 1997 Chevrolet Tahoe with a 5.7L engine is typically around 12-16 degrees BTDC (Before Top Dead Center) at idle, depending on the specific engine conditions and adjustments. However, for precise tuning and performance, it's essential to refer to the vehicle's service manual or consult with a professional mechanic, as factors like fuel type and engine modifications can influence the optimal timing settings.
What is the bolt pattern on a 2001 Ford F-250 4x4?
The bolt pattern on a 2001 Ford F-250 4x4 is 8x170 mm. This means it has eight bolts spaced 170 mm apart in a circular pattern. This specification is important for selecting compatible wheels and tires for the vehicle.
Where is egr valve on 1998 Ford F-150?
On a 1998 Ford F-150, the EGR (Exhaust Gas Recirculation) valve is typically located on the intake manifold, near the engine's rear, on the driver's side. It is usually mounted to the intake manifold and connected to the exhaust system via a tube. To access it, you may need to remove some components, such as the air intake duct or other nearby parts for better visibility and reach. Always refer to a repair manual for detailed instructions specific to your engine type.
Where is the engine control module in a Ford F-150 1993?
In a 1993 Ford F-150, the engine control module (ECM) is typically located under the dashboard on the driver's side. It can be found mounted on the firewall or near the steering column, often covered by a plastic panel. To access it, you may need to remove this panel and possibly some connectors. Always refer to the vehicle's service manual for detailed instructions specific to your model.
Were is the heater control valve on a 03 ford f-150 5.4 engine?
On a 2003 Ford F-150 with a 5.4L engine, the heater control valve is typically located on the engine's coolant hoses, near the firewall. It's often found on the passenger side of the engine bay, connected to the heater core inlet and outlet hoses. To access it, you may need to remove some components or hoses for better visibility and reach. Always refer to a repair manual for specific diagrams and detailed instructions.
How do you diagnose and fix heater blend door problems on a 2001 ford f150?
To diagnose heater blend door problems on a 2001 Ford F-150, start by checking for any trouble codes using an OBD-II scanner, as issues can often trigger warning lights. Inspect the blend door actuator for proper operation by listening for movement when adjusting the temperature setting and checking for any unusual noises. If the actuator is malfunctioning, it may need to be replaced. Additionally, ensure that the blend door itself is not stuck or blocked, which may require removing the dashboard for access and repair.
