Hand Tools

Surprisingly enough- a 6 mm drill bit, or if you don't have one,1/4 drill bit will do.

He wanted to wake up oily

he wanted to wake up oily

A Torx wrench is a different kind of wrench for special Torx screws. Same principle as Allen or Bristol wrench. Torx is designed so you can get more torque on the screw.

A general purpose hammer that comes in many sizes and shapes. The common one weighs around 24 ounces and has a 12" handle, The 'framing hammer' is a larger version with a long fairly flat claw and a heavy head mounted on a handle 16-18 inches long. These are used for heavy pounding of long nails, and the claw for removing same.

In all it's varieties this is possibly the world's most common hammer

Not necessarily, it just has different uses. -Nobody uses one hammer for everything.

a ratchet

It's a very short wrench head that fits on a ratchet driver instead of a socket.

The theory is that your screwdriver may be supplied by a power supply that is AC in output, i.e., 6.0 volt AC ~ for a 4.8 volt DC cordless Master Mechanic screwdriver. The AC output of the power supply would be 1.25 to 1.5 times greater than the rated DC power driver. This information is based on research for a Black and Decker screwdriver that uses a power supply that is 3.6 VAC to supply a 2.4 VDC driver or 5.5 VAC to supply 3.6 VDC driver. Hope this helps.

The dangers of using a hand saw are basically being careful not to cut your own hand that may be holding whatever you are cutting.

A stubby screwdriver is a screwdriver that is much smaller than the average screwdriver. It is used to get into places not easy to access with a regular screwdriver.

Looking down , you turn clockwise to tighten and the other way to loosen. This is common world wide.

it is plier with a combinition of gripping,cuttingand holding that's why it is called as a combinition plier.

I hope you mean a 5/8 bolt (58 inches would take a machine to turn). Measure your bolt head across the opposing flats. For a 5/8 bolt it may be 1 inch or even larger. The last one I did was in a truck's shock mounting and that took a 1.25 inch socket.

Torx or Allen wrenches get more torque (pressure) on the bolt.

A claw hammer is used for pulling nails and is most commonly used by a carpenter or other wood workers A pien hammer is used by blacksmiths, mechanics and other metal workers.

All technicians, electricians, plumbers and handymen use pliers almost every day.

spanner - british english ; wrench- american english

For a clearance hole you need a 9/64 drill bit.

Making short straight cuts in hardwoods.

Rub it against a magnet repeatedly. * The screwdriver can only be magnetized if made from steel or another magnetic metal, and most of them are. * Once magnetized, the screwdriver will remain magnetized always.

Many people sharpen their drill bits on a grinder. It's tricky to describe how and I'd advise asking an expert to actually show you, or second best, look at some Youtube videos on the subject.

It's a large wood chisel with straight sides .