Leather

The stage reached in the drying of clay when most of the water of plasticity has evaporated off, maximum shrinkage has occurred and the clay particles have come into contact with each other. It is at this stage that most surface treatments and some secondary manufacturing techniques, such as paddling, are executed, because the clay is still moist enough to allow alteration. Also known as green-hard.

I dont think so because I have been using it to heat my leather event riding boots which cost thousands and if anything it is making them softer.

Heat e.g. steam will open up pores in leather and soften it up so I dont think a bit of heat will damage it I know leather cannot be set on fire so unless it is excessive radiator heat then I dont think it can :)

the best clothing store our just a sell or good will

jackets these days can be all different but a climbing one is £40.00 because the materials they make are very expensive too buy

It's fine with a damp cloth. Obv don't soak them

Leather sofas made from cow's hide, but you must be aware that some only imitates the leather but not realy made from cows hide. To make sure you got the right one try to go this link and check their beautiful and original leather sofas : http://www.sofasandsectionals.com/

A nappa leather is a kind of treatment (by tawing) in leathers such as calf, sheep and kid leathers. xovn

No. Leather luster is actually really good stuff. Don't use it on combat boots, but on ceremonial and dress shoes/drill boots it should be fine.

Distressed leather is any type of leather that has been treated to age the

leathers appearance while not weakening the overall integrity of the product.

The aim is to give newly produced leather products a weathered and

broken in look that some customers find more appealing.

This look can be achieved in a variety of ways depending on the look required.

You can check the policy of your insurance, and if you may be covered or maybe if you don't exceed from their terms. Sometimes if you do covered maybe they only pay for the repair but not for replacement of your leather sofas.

What is the value of old hand bags and purse Some in 30`s 40`s and some in 90`s

When it comes to leathers, the difference between smooth grain leather vs pebble grain leather is the appearance. Smooth grain leather has a smooth appearance, pebbled grain leather has a rough surface.

Tumbled leather is created with the use of small pebbles that gently abrade the leather, resulting in a very soft texture to the product. This unique type of pebbled leather is desirable not only for the texture, but also the look of the tumbled leather finish.

You get Fur ever Clean leather Stain removel

Cordovan is actually a beautiful dye process used on leather. The effect is that of a deep maroon color that has black bleeding into the edges. This treatment was frequently used in the '60's on "Wejun" penny loafers.

i dont think a lot of guys like leather jackets. but i think it might come back in style. sighned (a guy)

Luke Leather is an Italian leather furniture company in the United States.

Suede is usually cleaned with a stiff brush

All leather must allow the movement of moisture back and forth (transpiration) otherwise it is not leather.

The degree of absorbency will be affected by the amount and type of finishing products that have been used on the leather during the retanning process.

Moisture is crucial to keeping leather in good condition and water based products are good for keeping the balance correct.

Aniline style leathers are more absorbent than Pigment Coated Leather but all leather finishes still have to allow moisture to get to the leather and are designed to allow this to happen.

Absorbency can be tested by putting a few drops of water onto the surface of the leather. If the water soaks in and leaves a dark mark it is likely to be an aniline style leather, if it beads on the surface the leather has some type of finish on the surface.

The rate of absorbency is a good indicator to technicians of the type of leather they are dealing with and is one of the 5 step process that is used during leather identification.

Chainsaw of ocurse

It us useful in protecting hands etc from getting burned because it is not a very good conductor of heat.

Natural, since it comes from the skin of other animals like cows, goats, pigs and sheep.

2500C

Top grain leather is simply the same a full leather with a few millimetres taken from the top to get rid of imperfections.

um i dont know what u evene mean!