Local Area Network

variable length subnet masks

the sixth bit is a one

the seventh bit in a one

the eighth bit is a zero

Midi

Ftp and smtp ( simple mail transfer protocol)

A Local Area Network (LAN) may use many different types of topologies (how the network is physically wired). If one uses a ring topology, then a special type of managed hub is usually used which implements packet switching in a round, ring structure, in which each station is visited by the packet in linear sequence.

Ring topologies also involve the use of a 'token', which describes whether a station on the ring may use the network or not.

Ring topology can be considered as a LAN and it is rarely used nowadays.

Peripherals

Yes, you can use the power over ethernet for the USB ports.

Gateway

Ian Tiao, is a graduating I.T student at the university of Antique, Sibalom, Antique, Philippines. he was born on January 22, 1988 at brgy. paliwan, Bugasong, antique, Philippines.

Time dependent data

The most likely reason for this occurance is your firewall is stopping computers from sending and receiving data. Norton doesn't recognize your network connection as allowed so it is blocking it automatically. You want to start Norton and configure the settings. Pay close attention to the firewall settings. Also so that this doesn't happen I again see if you can get Norton to ask want to do before it doesn't it. If you can do this they you will know when Norton denies access.

much bandwidth is used

Why would you want to do that? A file transfer usually takes place between two computers - one is operating as a client and the other as a server. Running the client and server portion on the same PC to transfer files is very inefficient.

You can use the ftp client to communicate with the ftp service on the same server/pc the same way as you would across the network; there is no difference.

Yes

A network, with a file-server at its heart - usually means you only need one copy of the software - each computer accesses the single copy on the file-server - instead of having to load it onto individual machines.

Additionally, communication between employees is faster - they can use email or instant messages over the network instead of having to walk to different offices.

For many businesses, they may have hundreds of computers that need to connect to the internet. In order to do this, they need each computer connected to a switch. The switch will forward frames within the Local Area Network (LAN) and anything that needs to be sent out to the Internet will be sent to the router. The main purpose of the switch is to connect many computers or nodes to one device which in turn connects to a router.

A LAN (Local Area Network) unless it is over a large geographical area then it would be a WAN (Wide Area Network).

PHYSICAL....AT DEMODULATION, HENCE IT is always done at the physical layer....usually some type of control system engineering is used... using a maximum likelihood estimation or some type of apriori estimation

the following answer is possibly for MT882 V1, there is one more article here http://portforward.com/english/routers/port_forwarding/Huawei/SmartAX-MT882/ this worked for my MT882 firmware ver V2 first you have to go in to the modem type 192.168.1.1 in internet explorer, of fire fox.

User name " Admin " password "admin" Now your in your Modem . Under the basic tab

on the left click the + and in the sub menu click on NAT. under NAT settings click Redirect,

Ok now click the "New" Button. The settings to put in here are first, Local Address is listed under your Local Area Connection in your Task bar just right click and go to status,

on the support tab it should say your local IP address mine is 192.168.1.4 put that in under Local Address. next, "Destination Port From" put in the number of the port you want to open "Destination Port To" Put the same number or greater depending on haw many ports you want. leave the rest defalt and click submit. save your settings and your done.

Ethernet segment.

You need to find out the ip which was assigned to your computer (Start->run->cmd->ipconfig). For instance, if your ip is 192.168.11.9 it means that your router is 192.168.11.x network. Most likely it will have ip 192.168.11.1. After you have found out the ip for the router, open Internet Explorer and type the ip in the address field (where you usually type urls).

Technology wise there is no such difference.

For the local network, you need to install better cables, and faster network cards. For the Internet connection, you have to pay your Internet Service Provider more, for a faster connection.

For the local network, you need to install better cables, and faster network cards. For the Internet connection, you have to pay your Internet Service Provider more, for a faster connection.

For the local network, you need to install better cables, and faster network cards. For the Internet connection, you have to pay your Internet Service Provider more, for a faster connection.

For the local network, you need to install better cables, and faster network cards. For the Internet connection, you have to pay your Internet Service Provider more, for a faster connection.