0
Manufacturing
Manufacturing is the use of tools, machines and labor to produce goods for sale or use. It may refer to various human activities ranging from handicraft to high tech, but is most commonly applied to industrial production where raw materials are transformed into finished goods.
8,256 Questions
What does H9 in Stainless steel mean?
H value is the size tolerance. Lower value has tigher tolerances.
IZE TOLERANCE OF ISO SPECIFICATION Dia. Or Distance Across(mm)Tolerance Precisionh6 h7h8h9 h10 h113Max0 -0.0060 -0.0100 -0.0140 -0.0250 -0.0400 -0.0603--60 -0.0080 -0.0120 -0.0180 -0.0300 -0.0480 -0.0756--100 -0.0090 -0.0150 -0.0220 -0.0360 -0.0580 -0.09010--180 -0.0110 -0.0180 -0.0270 -0.0430 -0.0700 -0.11018--300 -0.0130 -0.0210 -0.0330 -0.0520 -0.0840 -0.13030--500 -0.0160 -0.0250 -0.0390 -0.0620 -0.1000 -0.16050--800 -0.0190 -0.0300 -0.0460 -0.0740 -0.1200 -0.19080--1200 -0.0220 -0.0350 -0.0540 -0.0870 -0.1400 -0.220120--1800 -0.0250 -0.0400 -0.0630 -0.1000 -0.1600 -0.250
first priority is out look. maintainance must be minimum, its design should not involve complicated assembly which needs special tools. dismantling must be simplified. these are my practical problems, projecting through this answer.
man·u·fac·ture
ˌman(y)əˈfak(t)SHər/
noun
noun: manufacture
1. the making of articles on a large scale using machinery.
"the manufacture of armored vehicles"
synonyms: production, making, manufacturing, mass-production, construction, building, assembly, creation, fabrication, prefabrication, processing "the manufacture of aircraft engines"
- a specified branch of industry.
"the porcelain manufacture for which France became justly renowned"
- manufactured goods or articles.
plural noun: manufactures
"exports and imports of manufactures"
- a specified branch of industry.
A pulsation dampener is a device that can reduce or eliminate the
intermittent gaps left in a pressurized system at the time of system's
discharge stroke.Mainly Pulsation dampeners provide us a variety of
applications.pulsation dampener can be used in virtually all pressurized
devices to protect hardware, decrease maintenance costs, decrease down time,
increase performance, and increase efficiency.pulsation dampener also
used in electronic or mechanical devices that work underwater or in
other pressurized environments.Drilling pulsation dampener is one of the main example of pulsation dampener.
What are three things made in California?
Some products manufactured in California are:
- Robinson helicopters (Torrance)
- Rickenbacker guitars and basses (Santa Ana)
- Vandersteen Audio loudspeakers (Hanfors)
Why safety is a must in an industry?
Safety is a must in all type of industries to prevent accidents, incidents and ill health there by reducing the cost associated with accidents and incidents such as property damage, manpower loss, time loss, insurance premiums, loss of reputation etc.
How are today's cars made differently from Henry Ford's cars?
Ford was probably the first to implement "Assembly line" production in the car manufacturing business, the development of assembly line method of production is arguably attributed to Ford.
Now most cars made today follow the same basic method, except for some high-end manufacturers, most of how produce a limited number of cars annually(~20 per annum is a fair guess ), what has changed though is the technology advancement of the decades since Ford first implemented the idea.
Initially assembly line allowed for easier transport of product parts through the company passing from being a raw material to a finished product much faster and more efficiently than possible before that time.
What has change is that in the times the assembly line passed through people doing the work , for example workers fixing the windshield and what not, while today its much more automatized with robotic hands doing most of the work.
In one sentence, the change was that previously the transport of the product was automatized while today most of the production is.
Also a notable change, is the use of new materials and technologies ( take the wind tunnel for example, a method of measuring air resistance in relation to the shape of the car ) that were not available before.
Why did iron and steel manufacturing develop in Pittsburgh?
Because, Both Iron Ore And Coal To Fuel The Industry's Huge Furnaces Were Found In The Area.
How do you know quality of antiscalant?
keeping the difference between the input &output membrane unit in lees value
the increase of T.D.S in permeate water is Les value for long time
What is the main goal of six sigma implementation?
The main goal of a Six Sigma implementation is continuous improvement.
Which is the main production method for industrial ethanol in the UK?
These are essentially three methods used to produce ethanol:
- Manufacture from ethane using steam (the "synthetic" route)
- Production from sugars and starches by fermentation, using yeasts
- Production from biomass waste, using bacteria
What was state with the least amount of people engaged in manufacturing and trade in 1840?
state with the least amount of people engaged in manufacturing and trade in 1840
What is the difference between a standardized product and a differentiated product?
standardization of products mean that you have a particular set of products which are the same for every customer; for example, natural gas and electricity.
differentiation of products would mean that each product is individual and can be altered according to customer demand such as : Windows or Frisbees.
What is the manufacturing date of a Colt Cobra serial number F61691?
1974. All Cobra and Commando revolvers made that year began with F6 . . .
What products are manufactured?
Glassware is Suriname's main manufactured product.
Specifically, manufactured products tend to be items imported by Suriname from nearby Caribbean islands or from European Union countries and the United States of America. But Suriname is hoping to change its export-import picture. Currently, the country exports edibles such as bananas and shrimp and mineral resources such as bauxite and gold. It imports manufactured goods and technology.
Difference between investment casting and sand casting?
In the Sand Casting process, a pattern of the desired finished part including the metal delivery system is constructed out of hardwood, urethane, metal or foam. Sand containing bonding material to retain its shape is packed around the pattern. The pattern is removed from the bonded sand, leaving a cavity in the shape of the part. Molten metal is poured into the cavity and the metal solidifies. The sand is removed though a shakeout process. Other cast attachments, including the metal delivery system, are trimmed leaving the desired part. Internal passageways, including intricate structures, can be included in the casting by adding cores during the molding process. This makes sand casting a popular selection for pump and valve applications. Sand castings would typically be at least partially machined before use.
Investment castings are typically selected because they can be produced with fine detail, excellent "as-cast" surface finish, and shaped into internal or external features, thin walls, and internal passageways to get to a near net shape. This often leads to significant customer cost savings in material, labor and machining.
