MATLAB (Matrix Laboratory)

Simulink, developed by MathWorks, is a commercial tool for modeling, simulating and analyzing multidomain dynamic systems. Its primary interface is a graphical block diagramming tool and a customizable set of block libraries. It offers tight integration with the rest of the MATLAB environment and can either drive MATLAB or be scripted from it. Simulink is widely used in control theory and digital signal processing for multidomain simulation and Model-Based Design

Image building is the developing of a certain character and popularity in the society by excelling in one the fields of life. Celebrities do it often.

raster image = monitor, laser printer or ink-jet printer

vector image = graphics plotter

Yes, you can. Just go to Insert --> Picture --> From File (in ms office 2007/2010)

With selections, it will try to smooth out jagged edges.

The four major areas of computer operations in digital image processing is contrast enhancement. The second is remove the blur from pictures and smooth out graininess. The third would be magnifying, and rotating an image. Finally the image is compressed for storage.

segmentation is the process of dividing/splitting an image into it's constituent part for analysis purpose...

we can represente a RGB color in matlab by a pure quaternion q=0+R*I+G*J+B*K

we apply the function q=quaternion(0,R,G,B);

for this you must download the qtfm toolbox.

A while loop executes code inside the while block continuously until the said condition is not true. A for loop contains three parts. The first part is carried out prior to the for loop, the middle part is executed by the for loop until it is no longer true, and the final part is performed at the end of each go round of the loop.

Scalable Image Processing Methods for Target Acquisition and Tracking also can be noise at digital images.

See related link, maybe can help you.

If an image can be formed on screen it is classified as real. Virtual images cannot be projected on an image.

Yes, I am intresting in this research.

Images are stored in NetBackup catalog. Catalog is NetBackup database which resides on EMM server. Typically everyone configures EMM server and Master server on same machine.

Catalog contains information about backup images, configuration, device management. Folder for images is C:\Program Files\Veritas\netbackup\db\images and /usr/openv/db/images.

Digital image processing is great because you can save a file digitally and it can be uploaded in a matter of seconds. A disadvantage is that some may edit their photos instead of taking high quality photographs.

spinning image yes

CG (Computer Graphics ) refers to processing of creating a new image from Geometry , Lighting parameters , Materials and Textures .Using a Computer or any other digital media

While DIP(Digital Image Processing) is the process of manipulating an image acquired through some device . The image too often will be acquired from photographs,scanners , medical equipments.

MATLAB is the programming environment, you need to program in the command window or m files.

SIMULINK is used to do simulations, it has many blocks ,you just need to drag and connect them as you need.

A CT is a current transformer, used to measure current flow in a conductor. Neutral is power return, usually grounded at the distribution panel. A neutral CT, then, is a device that measures the current flow in the neutral conductor. In a three phase star system, each phase returns current to neutral, but the three phases cancel each other out, resulting in effectively zero current in neutral. The neutral CT is used to detect an imbalance in the system, perhaps caused by a ground fault or by some failure in one of the phase loads. In a single phase, single ended system, there is current on neutral, so the value of a neutral CT is not so great. If you also had a hot CT, you could compare and detect imbalance between hot and neutral, which would be an indication of a ground fault. (Actually, a ground fault current interrupting device, also called a GFCI, usually compares current in hot and neutral simultaneously, because both conductors are wound together as the sensing transformer primary - any perceived current is a ground fault.) In a single phase, double ended system, such as the 120/240 split phase system used in the US, a current CT could indicate ground fault or a system imbalance but, usually, imbalance might be a normal situation as various loads are turned on and off.

% program to design butterworth low pass filter

clc;

clear all;

close all;

alphap=input ('enter the pass band ripple');

alphas=input('enter the stop band ripple');

fp=input('enter the pass band freq');

fs=input('enter the stop band freq');

F=input('enter the sampling freq');

omp=2*fp/F;oms=2*fp/F;

%to find cut off freq and order of the filter

[n,wn]=buttord(omp,,oms,alphap,alphas);

% system function of the filter

[b,a]=butter(n,wn,'step');

w=0:0.01:pi;

[h,om]=freq(b,a,w);

m=2*log(abe(h));

an=angle(h);

subplot(2,1,1);

plot(om/pi,m);

ylabel('magnitude');

xlabel(''om/pi);

title('magnitude');

subplot(2,1,2);

plot(om/pi,an);

ylabel('phase angle');

xlabel('om/pi');

title('phase angle');

imagej is one of the best tool available ...........

PSpice is a program to simulate analog and digital logic circuits, where Matlab is a fully functional programming language designed to plot mathematical functions, implement various algorithms and solve complex mathematical problems.

R'