Metric System

In the metric system, all units are based on factors of ten. This makes converting from large units to small units much easier. The metric system is used in the scientific community and most countries.

To find volume in the metric system, you can use a graduated cylinder or a measuring cup for liquids, and a ruler or measuring tape for solids to calculate the length, width, and height of the object and multiply these dimensions. Alternatively, you can use a formula specific to the shape of the object, such as the formula for the volume of a cube (V = side length^3) or a cylinder (V = πr^2h).

The "g". One g is the gravity on earth. The force of gravity on the moon is about 1/6 of a g.

Since gravity and acceleration are indistinguishable, gravity can also be measured in the same units used for acceleration. For example m/s2 or feet per second per second. The SI unit for any force is the Newton. The value of g in SI units is 9.81 m/sec2, so the force on a mass m in kg is 9.81 x m Newtons

There are 1.57 inches in 40mm

Direct Conversion Formula 40 mm*

1 in

25.4 mm

=

1.57480315 in

Common automotive metric fastener grades include 8.8 and 10.9. These grades indicate the strength and hardness of the fastener, with 10.9 being stronger and harder than 8.8. It's important to use the correct grade of fastener when working on vehicles to ensure safety and reliability.

This is one question where no clear "yes" or "no" can be given. Metric system is a general term for several systems of units. SI is one of them, based (among other units) on meter, kilogram, second. It is in the subcategory of MKS (thus called for those three base units). Older systems (also labelled "metric systems) were often CGS, in other words, the base units included centimeter, gram, and second.

For every inch, it is 2.5cm, so 40inches would be 100cm, or 1metre. Hope that helps

This question cannot be answered sensibly. A square foot is a measure of area, with dimensions [L2]. A yard is a measure of distance, with dimensions [L]. Basic dimensional analysis teaches that you cannot convert between measures with different dimensions such as these without additional information.

1000g = 1 kg, so if you do the maths at the end 10,000g make 10 kgs

The unit of Inertia is kg and the Moment of Inertia is kg*m^2

This is the way i convert . K H D B D C M K=Kilo(meters) H=Hecto(meters) D=Deci(meters) B=Basic Unit(Meters in this case) D=Decka(meters) C=Centi(meters) M=Milli(meters) I remember this order by saying "King Henry Died By Drinking Chocolate Milk." So know lets convert. If you wanted to convert meters into millimeters(B to M) then you would see it is 3 letters to the right.(K H D B D C M)So all you do is take your Measurement in meters(lets say 23.447m) all you would do is move the decimal 3 places to the right. (So now it would be 23.447) But if you wanted to convert meters to kilometers, then you know K is three places to the left of B. So all you do is move your decimal 3 places to the right.(0.023447 Would be meters converted into kilometers.

0.42 c, algebraic steps below:

1 dl*1 l

10 dl*1 fl.oz.

0.0295735296 l*1 c

8 fl.oz.=0.4226752838 c

The unit of force is a Newton and, in an appropriate fashion, it is the weight of an average apple.

The United States of America is the only industrialized country that does not use the metric system as its primary system of measurement. Of course, scientists use the metric system even in the USA. But most Americans use the English system instead.

The correct symbol for the SI unit of temperature is K (kelvin).

Of all countries in the world that has an officially established system of measurement, only Burma/Myanmar, Liberia and the United States do not use the International System of Units (SI). The United States use Imperial units and U.S customary units. That is not to say that SI is not in use in the U.S. The customary units are nowadays defined from SI units. And the National Institute of Standards and Technology uses it. To answer your question: the metrication of the United States is gradual and there is no fixed date where you can say that the US adopted SI. http://en.wikipedia.org/wiki/Metrication_in_the_United_States

The metric equivalent of the .30-06 cartridge is 7.62x63mm. It has similar ballistic performance to the .30-06 cartridge and is commonly used in military rifles and some hunting firearms.

The inch-pound system is commonly referred to as the English system of measurement or the British imperial system. It is a system of measurement where distances are measured in inches and weights are measured in pounds.

2.54 cm = 1 in

(118 cm) / (2.54 cm/in) = 46.45669 in

1/1000 of a gram is one milligram .