Remington Firearms

The fore grip of the Remington 7400 and the Remington 742 are not directly interchangeable. While both models share a similar design and are part of Remington's semi-automatic rifle family, slight differences in dimensions and mounting may prevent a proper fit. It’s best to consult a gunsmith or refer to specific compatibility resources for modifications or alternative options.

When aiming a firearm, your cheek should fit snugly against the stock. This ensures proper alignment with the sights and promotes stability during shooting. A good cheek weld allows for consistent aiming and helps absorb recoil effectively.

To determine the age of your Remington 582, you can check the serial number against Remington's production records. The Remington 582 was produced between 1962 and 1985, so the serial number will help narrow down the year. Additionally, you can consult reference books or online databases dedicated to Remington firearms for more specific information on serial number dating. If needed, you may also reach out to Remington customer service for assistance.

The value of firearms like the Remington 22 Model 33, Russell Arms 12 gauge, and Remington 12 gauge Model 31 can vary significantly based on factors such as condition, rarity, and market demand. Generally, the Remington 22 Model 33 may range from $100 to $300, while the Remington Model 31 can be valued between $300 and $700, depending on its condition and features. The Russell Arms 12 gauge may also vary widely, typically falling within a similar price range. For precise valuations, it is advisable to consult a firearms appraisal expert or check recent sales data from reputable auction sites.

The value of a Remington 870 in 28 gauge can vary significantly based on factors such as condition, age, and any special features or modifications. Generally, prices can range from around $400 to $800, with collectors or rare models potentially exceeding this range. It's advisable to check recent sales, local listings, and consult with firearms experts or appraisers for a more accurate assessment.

To determine the age of your Remington Model Seven, you'll need to check the serial number, which is typically located on the receiver. Remington began producing the Model Seven in 1983, so the first two digits of the serial number can often indicate the year of manufacture. You can also consult Remington's official records or reference guides that provide manufacturing dates based on serial numbers for more precise information.

The cost of a .44 Magnum can vary widely depending on the brand, model, and condition. As of 2023, new revolvers chambered in .44 Magnum typically range from $600 to $1,200, while used models may be available for less. Additionally, the price of ammunition for .44 Magnum can range from $1 to $2 per round, depending on the brand and type. Always check local regulations and availability, as these factors can also influence prices.

Inserting a date and page number automatically ensures consistency and accuracy throughout a document, reducing the risk of typographical errors. It also streamlines the process of updating the date and page number in case of revisions, as changes will be reflected immediately across the document. Additionally, this method saves time and effort, allowing for a more efficient workflow, especially in lengthy documents.

The value of a 1966 Remington 1100 in 20 gauge can vary widely based on its condition, whether it has original parts, and the presence of any unique features. Generally, prices can range from around $600 to over $1,200 in excellent condition. For a more accurate assessment, it's best to consult current firearm sales or auction listings, as market conditions can fluctuate. Additionally, factors like provenance or collector interest can further influence its value.

To disassemble a Remington Peerless over-under shotgun, first ensure the firearm is unloaded and the safety is engaged. Open the action and remove the forearm by pressing the release latch located at the front of the receiver. Next, unscrew the barrel lug nut at the rear of the barrels and gently slide the barrels off the action. Finally, if needed, you can remove the trigger group by unscrewing the retaining screws and carefully lifting it out of the receiver. Always refer to the manufacturer's manual for specific instructions and safety precautions.

The Remington 870 shotgun began featuring the vent rib barrel in 1956. This design was introduced to enhance accuracy and improve sighting during shooting. The vent rib became a popular option, contributing to the 870's reputation as a versatile and effective shotgun.

To remove the grip cap from a Remington 742, first ensure the firearm is unloaded and pointed in a safe direction. Use a small flathead screwdriver to gently pry off the grip cap, taking care not to damage the wood or finish. If the cap is secured with screws, simply remove them before lifting off the cap. Always consult the owner's manual for specific instructions related to your model.

The Remington Model 11-87 was manufactured from 1987 onwards, and to determine the specific manufacture date for a particular serial number like 444542, you would typically need to consult Remington's serial number lookup resources or contact their customer service. Serial number databases often provide information based on the specific range of production years for each model. Without access to those resources, I can't provide an exact date for that serial number.

A .357 Magnum bullet can travel approximately 1.5 to 2 miles under optimal conditions, such as a flat trajectory and minimal air resistance. However, the effective range for accuracy and impact is much shorter, typically around 100 to 150 yards for practical shooting. Factors like bullet design, barrel length, and environmental conditions can also influence its range.

The value of a Remington 1904 12 gauge shotgun can vary significantly based on its condition, rarity, and any historical features. Generally, prices can range from around $300 to over $1,000 for well-preserved models. Factors such as original parts, the presence of engravings, and provenance can also influence its market value. For an accurate appraisal, it's recommended to consult a firearms expert or appraiser.

Remington described Fort Thomas as a military post situated in the rugged and picturesque landscape of the American West. He noted its strategic location for defense and its harsh conditions, including extreme weather and isolation. Remington's detailed illustrations and writings captured the essence of military life at Fort Thomas during his time.

The value of a Remington 300 model 710 can vary depending on its condition, age, any modifications made to it, and current market demand. Typically, a used Remington 300 model 710 can range in price from $300 to $600. It's important to research recent sales of similar models to get an accurate estimate of its current value.

Well, darling, the value of a Remington 25-20 model 25 can vary depending on factors like condition, rarity, and market demand. If it's in good shape and sought after by collectors, you might fetch a pretty penny for it. But if it's beat up and nobody gives a hoot about it, well, you might as well use it as a doorstop.

Remington Society barrel code lookup:

http://remingtonsociety.com/rsa/questions/barrelcodes

For value, of course model or the best description to determine, and best evaluation of condition, condition, and condition!

The value of a Remington model 770 in .243 caliber can vary depending on its condition, age, and any additional features it may have. On average, a used Remington model 770 in .243 caliber can range from $200 to $400. However, prices can fluctuate based on market demand and specific factors related to the individual firearm. It is recommended to consult with a firearms expert or appraiser to get an accurate valuation for a specific model.

It will be date code stamped on the left side of the barrel in front of the receiver, look up the code on the Remington Society of America site, it'll somewhere between 1935-1950, they made about 80,000 of them.

1929 (12 gauge) that's late enough that it would be date code stamped on the barrel on left side in front of receiver. A barrel location diagram and the date code table (month/year) is available on the Remington Society of America.

In their latest Q&A vid on YouTube they say the're not dating anyone at the moment.

500 or so each.

To determine the age of a Remington Model 552, you can check the serial number, which is typically located on the left side of the receiver. Remington began using a standardized serial numbering system in 1968, so if your model has a serial number, you can look it up in Remington's records or online databases to find its year of manufacture. Additionally, examining specific features or markings on the firearm can provide clues regarding its production period. For more precise dating, consulting a firearms expert or reference guide may also be helpful.