Shoes

To remove human urine smell from leather shoes, you can try sprinkling baking soda inside the shoes and leaving it overnight to absorb the odor. Alternatively, wiping the shoes with a mixture of white vinegar and water can also help eliminate the smell. Make sure to air out the shoes afterwards to let them dry completely.

Toenail fungus can be treated with over-the-counter or prescription antifungal medications. In severe cases, a doctor may recommend oral antifungal medications or laser therapy. Good foot hygiene, keeping feet dry, and wearing breathable shoes can help prevent toenail fungus.

You may want to try a type of room spray (It works like magic and keeps it smelling good for a while). You can usually find them any where, I got mine atBed Bath and body works. But... if your in a price pudget look for printable coupons (I get a lot of discounts!! from cloths, groshies, shoes, acceries, bedsheets, computers, animal food, furniture ect..)

It does not stain but it may become sticky!

By polishing, the irregularities of the shoe surface are filled with tan & by rubbing with brush a smooth layer is

formed. It shines because much reflection of light takes place on this smooth & regular surface.

A good stiff bristled brush should take care of it. You may have to work at it a bit, but it should knock it all off. They may be a little hard to find, but will usually be right near the shoe polish in the store if they have them in stock. In the military we would often 'strip' the shoes of polish using a stiff brush and saddle soap and water. Let the shoes dry out well before polishing them up. If there are scratches in the leather, hit the spots with leather dye before starting the polishing process.

Sunglasses typically block both ultraviolet (UV) rays and some portion of visible light. UV rays are particularly harmful to the eyes and skin, so it is important to choose sunglasses that offer 100% UV protection to protect your eyes from damage.

To remove melted plastic from shoe leather, you can use a mixture of warm water and mild soap to gently soften and scrape off the plastic. You can also try using a small amount of rubbing alcohol or nail polish remover on a cotton swab to help dissolve the plastic. It may be helpful to test a small, hidden area of the leather first to ensure the cleaning method does not damage the material.

A Brannock device is commonly used in shoe stores to measure foot size. It consists of a metal foot plate with sliding rulers to measure length, width, and arch length.

Rubber is a poor conductor of electricity, so wearing rubber-soled shoes or sitting in a car with rubber tires can help protect you from being struck by lightning. The rubber provides insulation, reducing the risk of electric shock in case of a lightning strike. However, it's still safest to stay indoors during a lightning storm.

If they're on a rack with others, take two pair and hold them the same like you're looking through both, and then look through both lenses at once. Then rotate one pair of glasses through 90 degrees. You should have gone from seeing through both darkened lenses to not being able to see anything at all through them.

Assuming they're all by themselves - found in the bottom drawer, or on a park bench - hold them up and look at the blue sky through them. Rotate the lenses. The sky should brighten and darken through polarized lenses. Bees use the polarization of sunlight to help them navigate.

Alternately look at a digital display on a watch or other equipment through the lens (Not LED display). Rotate the lens the display will go black at part of the rotation (The display has a sheet of polarized material - reducing this solution to the first answer)

Well he's probally fast with is shoes on but i think he is without them

Put vinegar on it

A great way to kill fungus & bacteria is to use an aqueous solution of formaldehyde. Put 1 teaspoon on a tissue and place together into a sealed plastic bag or other container with your shoes, leave outside for 12-24 hours. Formaldehyde is useful as a disinfectant as it kills most bacteria and fungi; including their spores. It can be obtained from a compounding pharmacy in small amounts. No ruined shoes here!

To get rid of shoe odor, you can sprinkle baking soda inside your shoes and let it sit overnight to absorb the smell. You can also try spraying a mixture of water and vinegar inside the shoes to kill odor-causing bacteria. Make sure to let your shoes fully dry before wearing them again.

You can use rubbing alcohol or nail polish remover on a cotton ball to help loosen the adhesive. Gently rub the sticker to slowly peel it off the lining of the shoe. Be careful not to damage the shoe's material while removing the adhesive.

To bleach leather shoes, first determine they are not of 'corrected grain' type; this is a plastic surface applied to the leather. Most patent leather (high gloss) shoes are so finished, and many inexpensive models, as well. Most women's shoes have some kind of plastic finish; you can tell this by the opaque, uniform color on them. They are generally less well finished than men's shoes. This is not universally true, however.

The best shoes for bleaching are aniline dyed, which means they have only a color finish, no additional surface material added. These directions pertain only to smooth-finished shoes. Suede is best recolored by professionals.

The first time out, it's best to try this with some inexpensive second-hand shoes.

1. Remove the laces and any after-market insoles (gel or foam rubber).

2. Strip off any shoe polish. This can be done with acetone (nail polish remover will do) or rubbing alcohol. Acetone is much faster. Do the job with gloves, soft rags, and excellent ventilation, preferably outdoors.

2. In a suitable container, such as a plastic tub, immerse the shoes in a weak bleach solution. Wear gloves and eye protection. Rubber soles often float, so the shoes may need to be weighted with stones or other non-chemically reactive objects. The shoes should be fully covered with the liquid. The solution should be no stronger than you would use on fabric clothing; it is better to use less bleach and repeat this step, than to burn the leather.

3. Keep watch. If the solution is mild enough the shoes can be left to bleach overnight. If they start looking 'funny', meaning blistered, rotten, or mushy, take them out of the solution and rinse them off. Repeat as required until the desired degree of 'lightness' is achieved.

4.. Thoroughly rinse and dry the shoes. Allow two or three days, minimum. They should not smell like bleach once thoroughly clean and dry.

5. Apply dye or cream color. Finish with polish.

Please note that there are special bleaches for leather which have their own instructions for use. This process is for ordinary chlorine bleach, as used in laundry. It will work best on lighter-colored shoes. Black shoes will turn gray.

Yes, it is true that Albert Einstein never learned to drive. He preferred to focus on his scientific work and relied on others for transportation.

Fructose is a type of sugar found in honey that is made up of two key "glucose factors", known as Dextrose (known as Glucose) and Levulose. They form the solid structural formula and consistency of honey, first starting off as a sandy granulated to a smooth sticky substance. The open chain structure is the deterimination of how these molecules interact with each other through the making of honey, also known as intermolecular bonding.

The empirical formula for sucrose is C(12) H(22) O(11). The molecule is known as a carbohydrate, and is a combination of 2 simpler sugars, glucose and fructose. The empirical formula for sucrose is C(12)H(22)O(11) It is known as a carbohydrate and is a combination of 2 simpler sugars, glucose and fructose.

polarized horizontally, as this type of polarization helps to block the horizontally polarized light that causes glare from reflecting off flat surfaces like roads. This can improve visibility and reduce squinting caused by intense sunlight.

To stop soft shoes from making a squishing noise, you can try sprinkling a small amount of baby powder or talcum powder inside the shoes. This helps absorb moisture and reduce friction. Alternatively, you can also try wearing moisture-wicking socks to prevent the squishing noise.

The best and fastest way to get rid of the skunk odor is using an ozone generator. At the moment I am tackling with this issue but I don't have the equipment to make an ozone generator. Therefore I am benefitting from sun rays which have almost the same effect of an ozone generator. However it takes more time to work out. Sun rays are perfect for getting rid of the bad odor from any textile or product. It can even remove the cat pee smell on a shoe or textile, but as I said it takes some time; perhaps a few days. Alpocalypse..

The correct term is "soles," not "souls." Soles refer to the bottom part of a shoe that makes contact with the ground. The term likely comes from the Latin word "solum," which means "bottom" or "base."

How to Clean & Disinfect Used Shoes

If you purchase somebody else's used shoes you will want to disinfect them before wearing them, unless this has already been done for you. Follow all 4 easy steps below to disinfect and clean your used shoes. In no time you'll have a pair of shoes that look brand new once again.

1. Pour at most half a bottle of rubbing alcohol on the outside of the shoes and let them sit for at least five minutes, killing any present bacteria. Careful not to use an alcohol-based solution with more than 10% water, because this may water damage the shoes.

2. With a spray bottle full of antibacterial solution such as Clorox or Lysol, spray the insides of the shoes (bleach may damage certain materials such as leather).

3. Use a hand cloth and wet it with an alcohol-based cleaning solution. Rub and clean the outsides of the shoes. This will take any dirt out of the shoes.

4. Let the shoes sit somewhere out of the sun to air dry.