Which skateboard brand has the best hardware?
All hardware is made of the same metal and the same way
How do you break in skateboard wheels?
"All you have to do is ride it, but if there being stubburn then
you can take WD-40 and grease them up. But if that doesnt
work then its the berrings and you need to go to a skate shop
were its all legit and buy a good par of them."
This is beyond wrong. Sorry; cept for the riding part
Ride them
If you're breaking in for slides then hit a hill a few dozen times with some carving until the shiny layer wears off, then do speedchecks or light slides (the smoother the pavement the better), by this point they're pretty close on their way, just keep sliding to make them even "butterier"
For slalom/downhill just wear the shiny layer off and make sure you're comfy doing speedchecks and pre-drifts on sticky wheels.
DO NOT WD-40
It'll gum your bearings and eventually they'll seize
I used 3 in 1 and the same thing happened, went to coleman slide, slide chopped, bearings seized, board went 90degrees and ripped 2 of my wheels off.
Some wheel companies have pre-broken in wheels for sliding (Otang grinds theirs on stones to name one) but a company like Abec11 does not pre-break their wheels in.
What is a skateboard used for?
1) can be used as a mode of transition, from one place to other without any expense of fuel.
2)especially used, in icy mountains, to skii.
3)pollution free transport media.
4)easy to use by children.
5)helps in training balance, and coordination skills.
What supplies do you need to build a 2 foot high and 4 feet long mini ramp?
all depends how big you want your ramp to be and how thick your wood is etc. etc.
Where can you buy skateboards in srilanka?
the biggest place is in a mall called esplanade in ratchada
How is skateboarding different from other sports?
Skateboarding is different from most other sports because most other sports use team work and your not dealing with something under your feet.
How do you do a double kickflip on Skate 3?
I've done a quad!
but it might be possible to do more!?!?
hope that helped!??
Which is better ripstick air or ripstick g?
to my knowledge a rip stik has rotating wheels like a shopping trolley. one front and one back. there are a few self propelling boards around . the rip stick and the smoothstar skateboards are two of them. theres probably more.
Ripsticks cost $50-$100 dollars at big name shops (Amart, Big W, Target)
How do you get a shoe sponsor on Skate 2?
Complete all the Thrasher challenges and the Snakestyle shootout challenge and the monster open challenge. The monster open challenge is at the monster clubhouse which you can purchase under property for 200,000
a device for riding upon, usually while standing, consisting of a short, oblong piece of wood, plastic, or aluminum mounted on large roller-skate wheels, used on smooth surfaces and requiring better balance of the rider than the ordinary roller skate does.
A skateboard is a piece of shaped molded wood for street surfing, or even street skating, the sport "skateboarding" is more of a passion and not really even a sport.
a skateboard is a wooden board with with wheels that you can Skate with Skating is Indeed a sport, Moving a wooden block with four one inch wheels and maneuvering it in a way to do a trick after less than a one foot jump before you hit the floor. Thank you
What is the abandoned waterpark that rob and big skateboard at?
Lake Dolores Waterpark (also known as Lake Dolores, Rock-A-Hoola Waterpark, or Discovery Waterpark), is a defunct waterpark on a 273 acres recreational area named Lake Dolores in Newberry Springs, California.
Is it OK if my skateboard trucks are a little bigger than your deck?
Yes, it depends how you like to ride. Bigger truck provide longer turns.
Where can you buy Tech Deck bikes in nz?
The best store is ToysRus where you can buy any type of tech deck.
To be honest, "Revert Skate Wax" Is by far the best wax. It is great for curbs, rails, and ledges. You can buy on revertskatewax.com.
http://www.revertskatewax.com/
What does skateboarding mean in Spanish?
me gusta el monopatinaje mucho
~andar n patineta= to skateboard
If you think tech decks are cool, that is your opinion. Other people may not think so. Maybe they are cool to you because of the color, yet to another person the color my be the fact why they don't like them.
How much does a pro skateboarder get paid?
depends who is sponsering them and how good they are they will also get paid for winning events
What size thunder trucks would fit a 7.5 deck or a 7.75 deck?
7.5 inch axle width trucks. Every truck company uses different measurements, for the hanger and for the axle, so find the right sized truck width of the brand you like for your board. You want the axles to be the same width as your board or a little narrower. Not wider.
How much Education needed to be a skateboard designer?
You don't need education, you need to be a good skater who loves to skateboard. But don't just go looking for sponsors. Just skate around where you live and skate in public areas that have skate shops. Then they will start to notice you, but you don't need education at all.
the "key Grip" handles lighting, shadows, all sorts of camera mounts, dolly tracks, and such, also often the key grip is the main safety guy on the set.
Why is the government against skateboarding?
Government is against skating because sometimes skaters run people over and skaters were known in mid 1900's to do graffiti and illegal things. The government is not against skateboarding. But some opinionated people have gotten ordinances passed prohibiting it. And almost invariably as a result of the actions of a very few skateboarders (or of others, and skateboarders got the blame). A major concern is injury to the public. That's serious stuff. If a boarder wants to risk injury, he may do so. But sometimes unwilling persons who are merely "there" are struck. Not cool. There is more. Skateboarders can sometimes damage property while participating in their sport. Railings on stairways can be bent. Concrete can be chipped or cracked. (Yes, it can.) Benches can be broken. Landscaping adjoining places where skaters challenge fixed objects can be trashed. Litter can be left at the site of a skate. All this contributes to the degraded appearance of facilities, both public and private. And it costs money to fix it. But by and large, most boarders don't crash into people. They avoid them on purpose, going out of their way to do so. They don't want to injure anyone and (surprise!) they don't purposely set out to hurt themselves. Skateboarders don't generally break fixtures or damage the landscape. Yes, sometimes, but not usually. There are a few "hard core" skateboarders who have a "hard headed" approach to their sport and they give everyone else a bad name. And some locals have taken a hard approach to the "problem" of skateboarding. That's where the civil codes banning skateboarding came from. The government is not against skateboarding, but is stuck enforcing the regulations because some special interests got codes enacted (either rightly or unfairly) to prohibit it.
MAKE SKATING LEGAL
Who is the best skateboarder in California?
Reside...? I can tell this isn't a sk8r. Or at least a really SMART sk8r. Dude some advice. people will think ur poser if u use words like reside. I think it means where u live so don't say reside. Say how many sk8rs live in California. Unless u want people to think ur poser
What is the best brand of longboards?
There are a lot of good brands of skateboards i.e. Chocolate, Girl, Zero, Real, Anti-Hero, Roger, Stereo, Given, Agents In Red.
Bad brands i.e. World Industries, Enjoi, Darkstar,Almost, Blind several of these brands used to be the best brands but after they got so big they started having their decks made in China to make a larger profit margin....In other words they are sellout brands.
But i think its most about personal preference. My favorite is probably Real because they have a very precise inspection process and deeper concave and stiffer wood and glues .