Where does subaru get their emblem?
The Subaru 5 Star emblem is the Pleadies cluster SUBARU being the most prominent of them :)
Subaru 1988 clunking noise when turning in 4wd doesn't do it in 2 fwd?
check driveline, my universal joint went bad and did same, replace and was fine(1990 loyale)
Where is number one piston on 2.5 Subaru?
the number one piston is on the left of you when facing the vehicle, it is the right side or passenger side and it must be at TDC for timing settings. (FENIX)
What country makes Subaru Vehicles?
Subaru is based in Japan, but they have headquarters in US.
www.subarushirt.com
How do you replace an inglass antenna in 2004 subaru?
The only way I know of is to replace the glass.
What is the Curb weight of an 85 subaru brat?
Well the curb weight of the GL with an EA81 is around 2100 pounds so its probably less because you have to take off a lot of weight from all the extra body and interior features so its probably around 1800-2000 pounds (this is just a guess)
How to change head gasket 87 subaru gl 1.8l?
The have to pull the engine. The valves are on the sides of the block.
Subaru Vehicles are made in Lafayette Indiana and Japan.
What does vdc off light stands for in Subaru?
vdc off means your vehicle dynamics control is disabled
How do you remove door panel to replace door speaker on a Subaru Baja?
Try the following http://www.bodyshopzone.com/archives/trim/door_panels/subaru/outback_2001_
I have a Baja and looking at the photos/instructions on this site I'm pretty sure it will work. I was stumped by the screw beneath the window control panel. Everything else seems the same.
This question can not be answered because of many variables, to include:
Age
Sex
Marital Status
Education level
Credit history
Driving record
Employer
Location of the parked/garaged vehicle
Annual driving distance
Group affiliations (ie, professional or alumni groups)
The range can vary greatly - I pay $124/mo for two turbocharged Subarus with great coverage, whereas others have cited $500+/mo for the bare minimum. Many insurance carriers offer online quote tools, so using them would give a more specific answer than asking here.
Yes its worth replacing the head gasket if the rest of the car is in good shape, but 2200 is rediculously high. Find another shop(s) and ask for a quote. Dont get be wrong, it will still be expensive, but you should be able to do better than $2200. That price seems high, but I am the perfect person to answer your question. Last August I had the head gaskets replaced in my 2000 Forester with the same mileage. It was leaking between cylinder and the water jacket on number 3. Subaru dealer in Lansing, MI quoted $1300 for the job but I had mine done by someone else for the same price but I trusted him more than the dealer. Hal's in North Carolina will do the job for about half that. You have to judge how well the vehicle has been maintained or abused. Is the body still nice? Transmission working okay? Interior still good? Do you still like the car? If you have a manual transmission, be sure to have the clutch, timing belt, and water pump changed at the same time. They should pull the engine to do the job so there is little if any additional labor. Good luck! --Ken
I'll second Ken's answer. I paid $2800. for both head gaskets on my 2000 Forester. They were leaking a very small amount. I had everything that Ken mentioned done except the clutch, which is still a lot of $$. The shop, Advanced Auto in Redding, CA, is known for their high prices. If I had it to do again, I might not take that "do it all" route. I had 140,000 on the beast, and I am the original owner! MountainMike
How do you fit Subaru engine into vw beetle?
you don't... put a larger carb. turbo kit and new pistons and seals on an old aircooled 2,000 cc or higher engine and you'lll get just as much if not more power outta that engine than a subaru banger. and you won't have to worry about a radiator and its cheaper as well.
What should your oil pressure be on 1990 subaru loyale 1.8 liter turbo?
if you go by the user manual, it should be between 28-72 psi but it fluxuates and if it reads "0" while it is idle or low speed, that's normal
What is the torque rating for the head bolt on 93 subaru 1.8 4 cylinder engine?
NOTEStep 1: Tighten all bolts to 22 ft. lbs.
Step 2: Tighten all bolts to 51 ft. lbs.
Step 3: Loosen all bolts, in reverse torque sequence, by 180°
Step 4: Loosen all bolts, in reverse torque sequence again by 180°
Step 5: Tighten bolts #1 and #2, in the torque sequence, to25 ft. lbs.
Step 6: Tighten bolts #3,4,5 and #6, in the torque sequence, 11 ft. lbs.
Step 7: Tighten all bolts, in torque sequence, by 80-90°
Step 8: Tighten all bolts, in torque sequence, again by 80-90°
fuji heavy industries owns subaru but Toyato owns 20% (it bought it form GM in 2005, it still owns 20%, i think) but Subaru is still its own car company.
What should be done at 105000 mi subaru service?
Your owners manual should have all the info you need.
Depending on your subie, have the brakes, belts, and engine checked.
Timing belts on most are 60-80K
Oil is every 3-5 K
tranny is every 20-30K
ETC...ETC...
What ever you do, don't listen to the first answer....
drive it into a creek
Where is the oil drain plug subaru loyale?
Near the front of the engine if it's a 92. The rear nut is for the transmission fluid, which should be changed every 30,000 or so, unless it's older.