Volume

220 fluid ounces is about 1.72 US gallons.

total volume = 3 x 2.5 x 6 = 45 cubic feet

storage volume = 45 - 20 = 25 cubic feet

3.79 tblsp. A tablespoon is equivalent to 0.5 liquid ounces so there are 2 tablespoons in 1 ounce. There are two different ounces, ounces of weight/mass and ounces of volume (fluid). This can change when you are using the tablespoon to measure a non-liquid such as flour or sugar since the weight of dry items is not the same as their volume. An ounce of volume is called a "fluid ounce." A tablespoon measures volume not weight. In order to convert tablespoons or teaspoons to ounces or back, You need to know what is being measured. A spoon of lettuce will weigh different than a spoon of gold in solid ounces.

A 2-gallon watering can has a capacity of 7.6 liters.

One gallon is equivalent to approximately 3.78541 liters. To express this as a fraction, you would write 1 liter as 1/3.78541 gallons. This fraction represents the conversion factor between gallons and liters, where 1 liter is equal to 1 divided by 3.78541 gallons.

1 litre = 1000 cc so 2 litres = 2*1000 = 2000 cc.

4 quarts (quarters) to a gallon. 41 divided by 4 = 10 (remainder 1)

To calculate the volume of the tank in cubic inches, multiply the length, width, and height: 60" x 48" x 23" = 66240 cubic inches. To convert cubic inches to liters, divide by 61.02 (since 1 cubic inch is approximately 0.0163871 liters): 66240 cubic inches / 61.02 ≈ 1084.7 liters. Therefore, the tank holds approximately 1084.7 liters of furnace oil.

To convert gas volume (liters) to weight (lbs), you need to know the density of the gas. The weight of gas depends on its type (e.g. gasoline, diesel, natural gas). Once you have the density of the gas, you can use the formula: Weight = Volume x Density.

An acre is an area, a cubic yard is a volume, the question has no meaning

Remember K H D | d c m (kilo, hecto, deka, (liter, meter, gram), deci, centi, milli). These are the denominations you need to list when converting metric units. Liters are three places to the left of milliliters. So you have to move the decimal place three times to the left (same as dividing by 1000). You will get 50 mL = .05 L.

24 tsp

1 oz = 6 tsp

1 tsp = 0.16 oz

35 millilitres = 0.35 decilitres

0.0125 liters is equal to 12.5 milliliters.

6.5 pints

1 quart = 2 pints

1 pint = 0.5 quart

5 qts

1 gallon = 4 quarts

1 quart = 0.25 gallon

1 US teaspoon = 4.92892159 ml = 4.92892159 cc (1 cc = 1 ml)

There are 32 quarts in 64 pints. Since there are 2 pints in a quart, you can find the number of quarts by dividing the number of pints by 2.

To accurately measure the volume of a liquid, use a graduated cylinder or a beaker with volume markings. Make sure the liquid is level with your eye at the bottom of the meniscus (the curved surface of the liquid). Read the measurement at the bottom of the meniscus for an accurate volume.

1.25 gal

1 gallon = 4 quarts

1 quart = 0.25 gallon

You need to know the density of the fluid density= grams/centimeters cubed (cc=centimeters cubed) for example the density of water is 1 g/cm3 5 cm3*1g/cm3 = 5 grams