How many gallons of paint are used each day?
The amount of paint used each day will depend on the project size and number of painters working. It is best to estimate based on past experience or consult with the painters to determine the daily paint consumption.
How many gallons are there in 100 quarts?
100 US quarts are roughly 94.635 Liters.
1 US quart ~ 0.946353 liters
1 liter ~ 1.05669 US quarts
If you need 5 ml for 10 gallons how many for 1 gallons?
He's not asking any of that...he means if you need to add for example a supplement to water and the dose is 5ml per 10 gal.....how much is equivalent supplement to 1 gal..the answer is 0.5ML....per gallon....pretend 10 gals is ...... 10.0 and you need 5.0ml......move the decimal 1 space to make 10.0 gal. 1.00....gal..then move the decimal the same in the 5ml... 0.50mL.... after I wrote this out however it felt wrong but it made sense before I typed it...
There are 100 centimetres in a metre.
So, if the water can be considered as solid cubes each one centimetre along each side then a line of 100 would cover the width of the container.
A square 100 wide by 100 deep would cover the base of the container.
A further 99 layers would fill the container.
So now we have 100 x 100 x 100, or 1,000,000 cubes of water each 1 cm3 in volume
As 1 cm3 is 1 millilitre, which is 1/1000 of a litre, then 1,000 litres would fill the container.
How many glasses is 640 ml of water?
An ounce is a unit of weight/mass
A millilitre is a unit of volume.
The two units can not be equated without knowing the density (mass per unit volume) of the substance being measured.
What is liquid measurement mm or ml?
Milliliters (ml) is a common unit of measurement for liquid volume in the metric system. It is equivalent to one cubic centimeter. Millimeters (mm) are used to measure length, not liquid volume.
How do you convert 4 per gallon to Euros per liter?
To convert 4 dollars per gallon to Euros per liter, you would first convert dollars to Euros using the current exchange rate. Then, convert gallons to liters using the conversion factor 1 gallon = 3.78541 liters. Finally, divide the cost in Euros by the volume in liters to get the Euros per liter value.
What is the ratio of a pint to a quart of water?
There are 2 pints in a quart. To convert quarts to pints, multiply the quart value by 2.
For example, to find out how many pints in a quart and a half, multiply 2 by 1.5, that makes 3 pints in a quart and a half.
1 Quart = 2 Pints
How many quarts of water in one liter?
One quart and change. A liter is about 5% bigger than a quart.
How many ml are in one fourth ounce ounce?
There are approximately 7.39 milliliters in one fourth of an ounce.
There are 128oz in one gallon. To answer your question, divide 36 by 128. 36oz is .28125 of a gallon, or a little more than 1/4 of a gallon.
How do you convert 155 milliliters into in fluid ounces?
You can't unless you know the material you're measuring. Grams are a weight measurement; fluid ounces are a volume measurement. To convert between weight and volume, you need to know how dense the material is: 150 grams of lettuce is a lot more volume than 150 grams of salt, because the lettuce is far less dense than the salt. Here's an online calculator that has some various substances you can convert between weight and volume: http://www.convert-me.com/en/convert/cooking The United States Department of Agriculture has a Nutrient Database with far more substances in it: http://www.convert-me.com/en/convert/cooking
What is Cubic feet of 6 yards?
The question can not be answered. You would have to specify 6 cubic yards. How many cubic feet are in a cubic yard? Multiply that by the number of cubic yards. You must know how many cubic feet are in a cubic yard, right?
What is 1 ml of grease in grams?
The weight of 1 ml of grease can vary depending on the specific type of grease being used. On average, grease has a density of around 0.9 to 1.2 grams per milliliter, so 1 ml of grease would weigh approximately 0.9 to 1.2 grams.
How many cubic meters are in cubic feet of propane?
1 cubic foot is approximately equal to 0.02832 cubic meters.
How many tonnes of ballast to 1 cubic meter of concrete?
1 cubic meter of concrete is made up of
1,750kg ballast
300kg cement = 12 bags 25kg
150 litres water
or
1,200kg chippings
350kg cement =14 bags 25kg
700kg sand
150 lit water
a mililitre is one one thousandth of a litre, so 30 mililtres are 30 1000ths of a litre.
there are 3.8 litres in a gallon
What is 20k gallons mean in regular gallons?
20k gallons is equal to 20,000 regular gallons. The "k" in 20k represents a thousand, so 20k gallons is equivalent to 20,000 gallons.