Volume

750 ml of what?

The milli- (m) prefix means one thousandth (1/1000)

→ 1 ml = 1/1000 l

→ 1 l = 1000 ml

→ 1 l of anything is 1000 ml of it.

So 1 liter of alcohol is 1000 ml of alcohol.

This is simple algebra. Look at the units. If density is .695g/mL, that means that you have .695g for every mL of the liquid. so for 25g, just set up the equation:

25g/x mL = .695g/mL

Solve for x to get 35.97 mL of liquid

130 mL = about 4.4 fluid ounces (mL x 0.0338 = fluid ounces).

If you are trying to figure out the 40lb bags of dirt they sell at the store... It takes about 50 of those to equal 1 (cubic) yard of dirt. I just had to do the research on it too.

there are 3 feet in a yard so i figure cubic feet and cubic yard would be the same principle. 1 1/2 bags would seem right.

There can be no conversion. A kilogram is a measure of mass. A millilitre is a measure of volume. The two measure different things and, according to basic principles of dimensional analysis, conversion from one to the other is not valid. The masses of equal volumes of the two substances will clearly be very different. So there is no direct conversion between mass and volume: you need to know the density of the substance to enable you to carry out the conversion.

There are approximately 4.49 US gallons in 17 liters.

A millimeter is a term of linear measurement, and a litre is a term of capacity.The answer to this question is not possible, because if you had a tall thin one-liter jug it would be a lot of millimeters high, and a short wide one-liter jug would be less millimeters high. However! A liter is 1,000 cubic centimeters (10 x 10 x 10 cms), and a centimeter is 10 millimeters. So 1 million cubic millimeters (100 x 100 x 100 m's) is 1 liter.

* Divide cubic millimeters by 1,000,000 and the answer is in liters.

48,000 cubic inches = 208 US gallons.

There are approximately 0.30 fluid ounces in 9 cc.

The LS1 was introduced in the Corvette in 1997, and made its way into the Trans Am and Camaro in 1998. The Camaro Z28 and Trans am were advertised at 305 hp and the SS and WS6 at 320. Ratings stayed the same until 2001. The 01-02 SS and WS6 models were rated at 325 thanks to an LS6 intake manifold borrowed from the Vette. However a slightly smaller cam was used to keep power at the same level. The fact is an ls1 is an ls1 reguardless of year or model. The SS and WS6 cars will NOT dyno higher than a Z28 or ls1 formula. All 98-02 LS1 cars dyno 280-300 with the A4, and 300-320 with the m6. Forget about the GM ratings. All LS1 cars are good for 350-360BHP. GM underrated these motors in order to keep sales up on the "king of the hill" Corvette.

48 oz. One pound equals to 16 ounces and one ounce equals 0.06 of a pound. Also this relates only to solid (weight) ounces. There are two different kinds of ounces, ounces of weight/mass and ounces of volume (fluid). This can change when you are using the ounces to measure a non-liquid such as flour or sugar since the weight of dry items is not the same as their volume. An ounce of volume is called a "fluid ounce."

A milliliter (mL) is a unit of volume in the metric system equal to one-thousandth of a liter. It is commonly used to measure small amounts of liquids such as medication or ingredients in recipes.

50 ml

1.136 L = 1 imp qt

There is no such thing as a metric quart. Liters are the standard volume measurement in the metric system.

1,050 cubic feet equals 38.89 cubic yards.

3 qts = 6 pints

1 quart = 2 pints

1 pint = 0.5 quart

A 10-pound propane tank can hold approximately 2.4 gallons of propane.

1000 liters = 264.172 US gallons = 219.969 imperial gallons
264.17

The Answer to this question is: The density is not measure Kilonewtons. That is because "Density" is defined as the mass per unit volume.

The Density of steel = 7850 kgf/m^3

40 ounces is equal to 5 cups, so you would need 5 glasses to hold 40 ounces of water.

A gallon is a unit of measure of volume. I think the volume was selected arbitrarily, as for example the U.S. gallon is slightly smaller [less volume] than the Imperial gallon [used in Canada]. A U.S. gallon is subdivided in smaller units of measure. There are: 8 fluidounces per cup. 2 cups, or 16 fluid ounces, per pint. 2 pints, or 32 fluid ounces, per quart. and 4 quarts, or 128 fluid ounces per U.S. gallon.

55 mL - A cc (cubic centimeter) and a mL (milliliter) are equal to each other in terms of volume.

1 pint=2 cups. 2 and 1/2 cups equals 1 and 1/4 pints.

1 mole of MgCl2=95.21 grams (found on the periodic table)

17.5 g of MgCl2(1mole of MgCl2/95.21g of MgCl2)=.184 moles of MgCl2(grams cancel out and rounded to 3 sig. figs)

.184 moles of MgCl2 (1 Liter/2.5 moles of MgCl2)=0.735L of MgCl2 (moles cancel and rounded to 3 sig figs)

0.735 L of MgCl2(1000 milliLiters/1 Liter)=73.5 mL of MgCl2 and round the answer to 2 sig figs which equals 74 milliLitersof MgCl2