Volume

One 50th of 5 liters is one 10th of 1 liter is one deciliter.

2.36 L

1 liter = 4.22 cups

1 cup = 0.23 liter

9180000 because the average bathtub holds approximately 270 liters

You have a 'dimensional' problem there 'cubic cm' or 'cc's are both units of volume a 'meter' is a measurement of distance Read the question more carefully, and edit it here, so that your units are of the same dimension

1.76 pints to one litre (rounded to 2 decimal points).

230 liters = 486 liquid pints or 418 dry pints.

To convert 1 ton of CO2 to cubic feet, you would need to know the density of CO2 at the given temperature and pressure. Typically, at room temperature and atmospheric pressure, 1 ton of CO2 is approximately equivalent to 515 cubic feet.

BRV is just the volume of the container of sand, therefore once you have the areal extent (A) and the height (h), you multiply these two to get the BRV. Programs can determine this for you depending on the tops and base picks of the sand - perhaps from logs. SeisWorks is a good example of a program that does this. Once in my MSc. class we did it by hand by actually printing a gridded map view of the reservoir, counting the blocks and finding the areal extent that way, and taking the heights from available well logs. Hope this helps

There is 14.79 milliliters in 1 tablespoon. 14.79 into 118 is 8 tablespoons. Its hard at first, but you'll get it.

2.10 liters = 71 US fluid ounces.

ml is for milliliters, and measures volume of liquid (how much room the liquid takes up). mg is for milligrams, and measures how much something weighs. So you can't really compare them (if you have 1,000 ml of pancake syrup, that's going to weigh a lot more than 1,000 ml of gasoline).

The only time they are the same is if you're talking about water, since the metric system uses the properties of water as a standard. So one milliliter of water takes up one cubic centimeter and weighs one gram. In that case, your 6ml of water would weigh 6,000mg (6 grams).

If it's not water, you can convert between volume and weight using the 'specific gravity' of a liquid. This is a comparison of how much it weighs compared to water. So if you look up the specific gravity of some liquid, and it's 1.3, then you can take the number of milliliters of the liquid that you have and multiply by 1.3 and that's how many grams it should weigh.

It can vary depending on the size and shape of the pop tabs, but on average, about 10,000-15,000 pop tabs can fit in a one gallon Ziplock bag.

1 cc or cubic centimeter of blood is equivalent to 0.001 liter of blood. When it comes to milliliter, 1 cc is equals to 1 milliliter or ml.

There is no direct ratio between square feet and cubic feet as they measure different aspects of an object. Square feet measure the surface area of a two-dimensional space, while cubic feet measure the volume of a three-dimensional space. It would depend on the specific dimensions of the object being measured.

To calculate how many gallons of oil are in a tank at a specific depth, you need to know the dimensions of the tank. You would typically use the formula for the volume of a cylinder (V = πr^2h) where r is the radius of the tank and h is the height of the oil. If you know the measurements, you can substitute them into the formula to find the volume of oil at 23 inches deep.

The weight would depend on the density of the ice cream since a fluid ounce is a unit of volume while weight is a measure of mass and local gravity. Real ice cream (not the supermarket or sugary fast food crap sold in the U.S.) is less dense than water, so four fl oz. of ice cream should weigh less than four fl oz. of water. U.S. ice cream, being mostly sugar and water, would have the same or greater density than water, so should weigh more than water per unit of volume.

Also, volume of a fluid depends on temperature and pressure.

It is pretty dense, probably close to two cups solid. Melted probably a cup and a half. Cups is a measure of volume. Pounds is a measure of weight and mass. You can not directly convert the two.

A fluid ounce is a unit of volume. Pounds are a unit of weight. Because of this, there's no set answer to your question. Different fluids have different weight densities. In other words, the same volume of them may not weigh the same because some fluids are denser than others. To know the weight of a fluid ounce of a liquid or gas, you must either weigh it or use its weight density.

If you know the density and mass of the liquid, you can calculate the volume by dividing the mass by the density.

density = mass/volume

volume = mass/density

mass = density X volume

To find the volume in cubic meters needed to cover 36 square meters, we need to know the desired thickness of the material being used for coverage. The volume can be calculated by multiplying the area (36 square meters) by the thickness of the material in meters.

10 tablespoons is equivalent to 5/8 cup.

Using the formula for volume of a cylinder, (pi)r2h, I looked at a normal 15 oz. Campbell's soup can to find the height as 4.25 inches, and its radius as about 1.5 inches. Plugging those values into the formula, I get (3.14)(1.52)(4.25), I got an answer of approximately 30 in3 (or 9.5625(pi) in3).

The inch is a measure of distance and the cubic inch is a measure of volume. You cannot convert one to the other.

Multiply by .001 to get an answer of 5.26 liters You do this since in every liter there are a thousand milliliters. lets say you have 1 milliliter, that would be one one thousandth of a liter or .001. if you had ten that would be .010. if you had 500 it would be .500. in this case you have 5260 which would be 5.260. All that you are doing essentially is multiplying 5260 by the unit measurement of .001.