Volume

1 US teaspoon = 4.92 milliliters

1 metric teaspoon = 5 milliliters

uIU stands for micro international units. It is commonly used as a measurement in laboratory tests to quantify very small amounts of substances, such as hormones or enzymes.

The volume of a pair of dice could be gotten by measuring the sides and calculating it via length/width/height. A second manner would be displacement, where the dice are placed in a liquid with a known density, and the mass of the liquid displaced is used to determine volume.

The amount of water in a pail will depend on the size of the pail. An average sized pail will hold about three gallons of water.

7 liters is equal to 7000 milliliters. Since milli- stands for a thousand, 7 L x 1,000: 7,000mL.

A kL (or kilolitre) is bigger than a litre. When there is "kilo" in front of a word, it implies that it is 1000 times the unit mentioned. Therefore, a kilolitre is 1000 litres.

As a few examples:

a) 9000 litres (L) = 9 kilolitres (kL)

b) 5 kL = 5000 L

c) 88 L = 0.088 kL

Please keep in mind that I am from Canada, so you may spell "litres" as "liters"

Hope that helps :)

The mass of 1 cm3 of water is approximately 1 gram.

1.5 L = 3.17 pints

1 liter = 2.11 pints

1 pint = 0.47 liter

Drop sizes change depending on the weight of the liquid. This range can be anywhere between 50 - 120 drops per teaspoon. Since there are 3 teaspoons per tablespoon, then (50 to 120) x 3 = 150 to 360 drops per tablespoon. There are also several exact definitions of a "drop". Here are 3 of them: * the "metric" drop, 1/20 ml (50 μL). * the medical drop, 1/12 ml (83⅓ μL). * the Imperial drop, 1/36 of a fluid dram (1/288 of an Imperial fluid ounce or 1/1440 of a gill (approximately 99 μl).

The prefix "milli-" means a thousand so divide by 1000. Therefore 4000 divided by 1000 = 40 ltrs

3.053 kL equals 3,053 L.

7.584 USG in a cubic ft.

1 fluid ounce = 28.41 milliliters 16 fluid ounces = 16 x 28.41 = 454.56 milliliters

Your python may stay small but that is NOT good for a python to be in a small space. It leads to agression. You must get bigger tanks for your python as he grows, or just start with a large one.

well it all starts with four marbles..... for mL you would do the following:

for example lets use a chalkboard eraser. you would find its volume (for say 135cm3). then you would add how much the marble weighs which may be 2.26796 mL. but lets round that to 2 mL. now you times that by four which is? 8 mL!! now you add 8 mL to 135 mL which equals...................................................................................................................................................................................................

143 mL!! there you go but just to let you know if you need the answers to the Metric mania worksheet go to this website:

www.sciencespot.net

90 mL equates to approximately 3.04 fluid ounces.

One tablespoon holds 1/2 fluid ounce. A cup holds 8 fluid ounces, which is the same as 16 x 1/2 fluid ounce or 16 tablespoons.

2 qts

1 quart = 2 pints

1 pint = 0.5 pint

Same as measuring a room. length times width times height. 10 inches long, 6 inches wide is 60 square inches times 5 inches tall which is 300 cubic inches. This is approximate, use the measurements of the shoebox and do the same math.

Weight and volume cannot be linked without knowing the density of the liquid/material in question

A microgram is equivalent to 10 to the power of -6 grams

It equals 3 cups.