Volume

2.66

1 gallon = 4 quarts

1 quart = 0.25 gallon

1 kilogram of water is equivalent to 1 liter because the density of water is 1 g/cm³, which is the same as 1 kg/L. So, 1 kilogram of water occupies 1 liter of volume.

12.68 pints1 liter = 2.11 pints

1 pint = 0.47 liter

36 tps

1 oz = 6 tsp

1 tsp = 0.16 oz

By US measurement, 16 ounces to a pint, 1 liter = 2.113377 pints, and 3 liters = 3 x 2.113377 pints = 6.034 pints By imperial (British, Canadian, etc.) measurement, 20 ounces to a pint, 1 liter = 1.759754 pints, and 3 liters = 3 x 1.759754 pints = 5.28 pints
3 litres = 6.34012926 US pints

About 30 pounds, depending on temperature, grade, etc.

To get a bit more exact, an American gallon of water weighs 8.33 lb. The specific density of gasoline ranges from 0.71-0.77. So the weight of 5 American gallons of gasoline would be between:

5 x 8.33 x 0.71 = 29.6 lb

5 x 8.33 x 0.77 = 32.1 lb

4.8 liter = 292.913972 cubic inches

Weight and volume cannot be linked without knowing the density of the liquid/material in question

1000 gram=1 liter

1 gram=1/1000 liter

100 gram =1/10 liter

again

1 liter=0.001 cubic meter

1/10 = 0.001/1/10 cubic meter

= 0.001*10 cubic meter

=o.1 cubic meter

There are approximately 173 liters in 173 kg of water, as the density of water is 1 kg/L.

3000 cc is equivalent to 3 liters of liquid removed from your lungs.

Assuming the pool is a rectangular shape, you can calculate the volume in gallons using the formula: Length (ft) x Width (ft) x Average Depth (ft) x 7.5. For a 14x28 pool with an average depth of 5 feet, the calculation would be: 14 x 28 x 5 x 7.5 = 14,700 gallons.

2 1/2 qt = 2.36 L

1 quart = 0.94 Liter

1 Liter = 1.05 quart

There are 1 million cubic centimeters in 1 cubic meter. Therefore, to convert 15000 cubic centimeters to cubic meters, you divide by 1,000,000. So, 15000 cm³ is equal to 0.015 m³. So, the answer is B) 0.015 m³.

one

Actually one fluid ounce does not equal a weight ounce. It depends on the fluid and how dense it is. It is usually close to one weight ounce. Milk I believe is heavier than water due to its density. So one fluid ounce of milk should not equal one ounce.

The volume of the hole is 2 yards * 3 yards * 1 yard = 6 cubic yards. To convert this to cubic feet, we multiply by 27 (since 1 cubic yard = 27 cubic feet). Therefore, the volume of the hole in cubic feet is 6 cubic yards * 27 cubic feet = 162 cubic feet of dirt.

Six liters of milk is equal to 12.7 pints or 10.6 UK pints.

The last year that gas was under two dollars a gallon in the United States was 2016.

One liter of water equates to 4.23 US cups or 3.52 UK cups.

3.8 liters is 1 gallon

mass doesnt equal volume, so unanswerable!

Remember K H D | d c m (kilo, hecto, deka, (liter, meter, gram), deci, centi, milli). Liters are three places to the left of milliliters. So you have to move the decimal place three times to the left. You will get 40 mL = .04 L.

Place a rock in a container, add water, and record the volume.Pour an unknown amount of water into a glass container, add the rock, and note the water level; the unknown amount of water plus the weight of the rock is the volume of the rock.Pour a known amount of water into a glass container, add the rock, and note the new water level; the difference in water levels is the volume of the rock.Water displacement will not work.

Well, one cup is equal to 236 to 237 milliliters (actual answer is 236.5582) so two cups is equal to 472 to 474 milliliters depending on your rounding. Also one milliliter is equal to 0.004226753 cups (or one thousandth of a cup).

To find the mass of KMnO4 needed, you can use the formula: mass = molarity x volume x molar mass. First, calculate the moles of KMnO4 using moles = molarity x volume. Then, multiply the moles by the molar mass of KMnO4 to find the mass needed.