Volume

130 Imperial gallons = 590.991944 litres

130 US gallons = 492.103532 litres

bottle of hot chili sesame oil is 5 fl oz, 148 mL!

1cubic foot contains: 6.22 imperial gallons or 7.48 u.s. gallons...

Gas will always keep expanding until it fills the entire shape and volume of whatever container you put it in.

Liquid won't do that. It just lays there in the bottom. It takes the shape of the

container, but keeps the same volume it had when you poured it in there.

1 pint = 16 ounces

1 ounce = 0.06 pint

Each car consumes gas at a different rate. On average, about 2.5 gallons.

Remember K H D | d c m. Litres is three places to the left of millilitres. So you have to move the decimal place three times to the left. So in this case the answer is 0.058 litres.

The fuel tank capacity of a 2009 Ford Ranger XL is approximately 15.2 gallons. This capacity can vary slightly based on the specific configuration and options of the vehicle, but 15.2 gallons is the standard for most models of that year.

A litre of water is a pint and three quarters. So closest to a quart

It depends on what food or liquid the 2 ounces is of.

Usually it would be about 48" high by 65" long

A little less than 1 tablespoon (which is 14.2g).

See the related links for further information.

Fill the 5 litre and empty into the 12 litres twice. Then fill it again and with this pour to the brim of the 12 litres. You are then left with 3 litres in the 5 litre jug.

Because: 5+5+5=15, however you have only space for 12. i.e. 15-12 is 3

You cannot.

Cubic metre per second is a measure of flow while cubic decameters is a measure of volume. The two measure different things and it makes no sense to try to convert from one to the other.

In earth-moving, landscaping a yard is an abbreviation for a cubic yard, or in a metric environment, a metre is an abbreviation for a cubic metre.

If a customer were to order 25 tonne of material, then that was taken as to mean a cubic yard. The mass of gravel approximates 1 tonne per cubic yard and that is why the terminology is interchangeable.

With the advent of stricter consumer protection laws, terminology such as "a yard" is gradually fading out and being replaced with very accurate weights usually using a digital weighbridge.

Thousands. And that's why New Orleans was such an issue - the city took out all the trees that would have helped with the flooding during the natural disasters. They are enormous sponges.

The volume of 1 US tablespoon is 14.786765 milliliters. If you really need the measure in liters, then 14.786765 milliliters are 0.014786765 liters.

The volume of a sphere is calculated using the formula ( V = \frac{4}{3} \pi r^3 ), where ( r ) is the radius. When the radius is quadrupled (i.e., multiplied by 4), the new volume becomes ( V' = \frac{4}{3} \pi (4r)^3 = \frac{4}{3} \pi \cdot 64r^3 = 64 \cdot \frac{4}{3} \pi r^3 ). This means the volume increases by a factor of 64. Therefore, when the radius is quadrupled, the volume of the sphere increases 64 times.

1.5 liters = about 50.7 fluid ounces.

50mL is 5cL (0.1 centiliters per milliliter).

8 pints = 1 gallon

because if 2 pints = 1 quart

and 4 quarts= 1 gallon

2 pints per quarts * 4 quarts = 8 pints go into a gallon

9 millimeters how many liters?

2

1 quart = 4 cups And 1 cup = 0.25 quart.

There are 32 US fluid ounces (2 pints, or 4 cups) in 1 US quart (946.4 ml).

There are 40 Imperial fluid ounces (2 pints) in 1 Imperial quart (1,136 ml).

Note that there is no 'cup' in the Imperial system, it is best to use pints or half pints, and not 'cups'.