Welders

The oxy-acetylene welding process involves using a torch to mix oxygen and acetylene gases in a controlled manner to generate a high-temperature flame. The flame is then directed onto the metal workpiece to melt it, while a filler rod can be added if necessary to create a weld joint. Proper safety measures, such as wearing protective gear and ensuring proper ventilation, should be followed when using oxy-acetylene equipment.

Neodymium and praseodymium are used in glass for welder's goggles to provide protection against harmful infrared and ultraviolet rays generated during welding. These elements help absorb and filter out the intense light produced by welding to prevent eye damage and maintain optimal visibility for the welder.

One method of removing a specimen of weld , using a non-thermal process would be to use a non-themal process. A saw. The reason this is rarely used is the difficulty in cutting some metals or shapes. The sample usually taken is called a "coupon" . When taken from a pipe weld it is cut out with a torch and ground clean for inspection. to cut the same piece out of a pipe , with a saw would require too much cutting and due to the nature of the shape could be dangerous.

Welder's glasses work by using special lenses that have a very high optical density to shield the eyes from the intense light generated during welding. These lenses are designed to filter out harmful ultraviolet and infrared radiation while allowing a safe amount of visible light to pass through. This protects the welder's eyes from damage and allows them to see clearly while working.

No, it is not safe to store welders oxygen bottles with propylene bottles. Oxygen and propylene are combustible gases that can react violently if they come into contact with each other, leading to a fire or explosion. It is best to store these bottles separately in well-ventilated areas designated for gas storage.

Welding is primarily a physical job that requires manual dexterity, strength, and hand-eye coordination to operate equipment and manipulate materials. However, there is also a mental aspect to welding, as welders need to understand welding techniques, safety procedures, and interpret blueprints or technical drawings.

The element that provides the coloring in the glass of welder's goggles is usually iron oxide. It helps to protect the welder's eyes from the bright light and harmful UV rays produced during welding.

Welder polarity has to do with DC (Direct Current) welders. Essentially, polarity is the direction of the current. Straight polarity means that the current is running from the electrode, to the metal, and back through the grounding clamp. Reverse polarity means that the current is going the opposite way, from the grounding clamp, through the metal, and up through the electrode.

Stick welding is a type of welding that uses an electrical current to produce an intensely hot plasma arc that melts metal together while adding filler metal, which is what the "stick" electrode is made of. The electrode (or stick) is usually about a foot in length and is covered in flux to prevent atmospheric contamination. It is held by an electrified clamp that the welder runs across the joint to weld.

the only way you can weld aluminum is with AC current and high freak setting on the welder , if your welder does not have theses setting then it will not weld aluminum.

Good answer! AC is a must! The only other way is if you have an oxy/ace setup (very low psi) or alot of mapp gas, but you have to spread a flux paste on the material (looks like drywall mud) EXTREMELY MESSY!

Temperatures in an electric arc can vary widely depending on factors like the material involved and the current passing through. Generally, temperatures in an electric arc can range from 3000 to 20000 degrees Celsius.

The existing 4 wires meaning Red, Black, White, Bare? Red and black are "hot" (using 120V from each phase of your service entrance), white is neutral, and bare is ground. Ground the bare or green wire to the electrical box then use red and black as your hot wires and white as neutral. You must ground the welder itself also with a jumper wire in order to be safe.

Personality traits best suited to a welder are , patience , calmness, observance of detail, ability to stay in one / or many positions for some time. While these are some of the qualities most helpful to be a welder , this is only an over view. there are other things to consider, if caffeine makes you even the slightest bit "jittery" IE a bit shaky or if your hands aren't so steady, this could affect your welding ability, and the outcome of your weld.

The average age of a welder varies depending on the region and industry, but typically ranges from mid-30s to mid-40s. As welding is a skilled trade that requires experience and expertise, many welders gain experience over time, contributing to the average age being slightly higher compared to other professions.

The average retirement age for a welder can vary depending on factors such as the individual's personal preferences, financial situation, and physical health. However, many welders retire between the ages of 62 and 67.

It may be challenging to work as a welder with a felony conviction because some employers may be hesitant to hire individuals with a criminal record. However, it ultimately depends on the employer's policies and the specifics of the felony conviction. It may be helpful to be transparent about your background, emphasize any rehabilitation efforts, and seek out employers who are open to hiring individuals with past convictions.

The answer key for the Blueprint Reading For Welders 8th Edition can be found here: http://www.excelhonour.org/blueprint-reading-for-welders-answer-key/. All of the answers are on this website and can either be read online or downloaded.

If a person is employed as a rigger, he or she is responsible for the movement and lifting of heavy objects. The rigger may use a crane to complete the work.

if your in alberta canada(or bc) im pretty sure you dont need any schooling except the welding course at a college but i know that some places want your grade 12. its booming up here so if you can weld and work hard this i a perfect place to be right meow

There is no schooling requirement to be a welder. However, the more education in a particular field will give you an advantage when it comes time apply for a job. If you can take a welding or general metal working class in high school it will help, and a lot of vocational schools offer one and two year programmes. These courses familiarize the student with different types of equipment and processes, as well as basic metallurgy.

it all began back way when, when i was a kid, welders would come to my house and burn me, i dont want to tell the story because it shakes me up, but this is what happened. I was found one day dead, because of a welder getting pissed off at me because i beat his dog with a broom stick, oops

Depends on the context in which its used. Could be a "rig" on land or in water.

Some jobs require "Riggers / Welders" who work with cranes and must be able to "rig" large loads as well as fabricate crane booms and spreader bars.

"rig welder" is a vague term, most likely job specific.

yes and no for yes if you want to work for the company and no if you only like it for a hobby.

without experience a welder will usually make around $15.00 depending on what your welding, MIG, TIG etc......... an experienced welder will make up to $52.00 per hour. Keep in mind that this generally means welding underwater or in very tight spots- you definitely cannot be intimidated by small enclosed areas.
They take up to a million years